[?]: WinCC V7.0 is error with KepserverEX V4

ngoc · Post by **ngoc** » Mon Oct 27, 2008 4:53 pm

I can't connect Kepware KepserverEX V4 with WinCC V7.0 in OPC Channel.
Error Image: http://plcforum.uz.ua//E ... 7.bmp.html
Please, anybody help me
Thanks!

zxcslo · Post by **zxcslo** » Mon Oct 27, 2008 5:34 pm

ngoc wrote:I can't connect Kepware KepserverEX V4 with WinCC V7.0 in OPC Channel.
Please, anybody help me
Thanks!

Try this...

http://www.kepware.com/Support_Center/S ... _Guide.pdf

Works like a charm (also with WinCC v7.0).

LP

ngoc · Post by **ngoc** » Mon Oct 27, 2008 5:48 pm

Thankyou zxcslo reply!
But before I used WinCC V6.0 or V6.2 connect with KepServerEX V4 very fine. Only WinCC V7.0 is error with KepserverEX V4

zxcslo · Post by **zxcslo** » Tue Oct 28, 2008 6:40 am

I would suggest to try first with the demo project, that came with the Kepware server (simulation, no real PLC).
If that don't work, that reinstall Kepware.

If you try with OPC Scout (from Kepware, fourth button from the right on the top), can you connect to the server?

LP

ngoc · Post by **ngoc** » Tue Oct 28, 2008 12:04 pm

Hi Anybody!
I setup KepserverEX V4.300.499.0-U and WinCC V7.0 again, but i can't connect KepServerEX and WinCC V7.0.
AnyBody help me. Thanks

zxcslo · Post by **zxcslo** » Tue Oct 28, 2008 1:07 pm

ngoc wrote:Hi Anybody!
I setup KepserverEX V4.300.499.0-U and WinCC V7.0 again, but i can't connect KepServerEX and WinCC V7.0.
AnyBody help me. Thanks

Can you connect with OPC Scout to the Kepware server?

LP