[?]: Master Slave Documentation

SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
Post Reply
reymond_craig
Posts: 139
Joined: Wed Sep 26, 2007 2:57 am
Location: Philippines

[?]: Master Slave Documentation

Post by reymond_craig »

Can somebody help me where I can find documentation for master slave configuration of two S7300cpu? Is it posible for two S7300CPU? Can somebody gives some idea on what's going on in master slave configuration of two s7300 cpu? Thanks alot.

Thank you very much in advance. :)
Juli
Posts: 66
Joined: Sat Dec 10, 2005 4:01 pm

Post by Juli »

Hi

here is a link for training material Simatic.
Please look under :
D6 =PROFIBUS DP with Master CPU 315-2 DP / Slave CPU 315-2DP



https://www.automation.siemens.com/fea/ ... TTPS=REDIR

regards
Juli
reymond_craig
Posts: 139
Joined: Wed Sep 26, 2007 2:57 am
Location: Philippines

Post by reymond_craig »

Hi Juli,

I really want to thank you very much for the help. I really appreciate it. I hope this can help me to learn and my friends also who really needs this one in one of his project. Once again thank you very much.

Warm regards,
Rey :)
Juli
Posts: 66
Joined: Sat Dec 10, 2005 4:01 pm

Post by Juli »

Hi Rey

no problem :D

-> mutual assistance <-

regards from Germany

Juli
nguyenthe_k
Posts: 11
Joined: Sun May 11, 2008 11:14 am
Location: Vietnam

Post by nguyenthe_k »

This is quite value resource. However I can't download some module in this package 'cause they don't simply give me a link:

D7 PROFIBUS DP with Master CPU 315-2 DP / Slave MICROMASTER Vector
D8 PROFIBUS DP with Master CPU 315-2 DP / Slave MICROMASTER 420
D9 Programming of SIMATIC WinAC
D13 ASIsafe with the SIMATIC S7-300 and the AS-interface safety monitor
D14 PROFIsafe with Master CPU 315F-2 PN/DP / Slave ET 200S
D15 PROFIBUS and Safety Integrated with Master CPU 315F-2 DP / Slave ET 200S F-CPU

From E1-E8. F1-F6, G1

It seems they've hidden the most important materials ?
Does Anyone have all of them and please share to everybody.
nguyenthe_k
Posts: 11
Joined: Sun May 11, 2008 11:14 am
Location: Vietnam

Post by nguyenthe_k »

I've figured out that they have full samples only in Deutch ? Do they don't have any translator to translate it to English ?
nguyenthe_k
Posts: 11
Joined: Sun May 11, 2008 11:14 am
Location: Vietnam

Post by nguyenthe_k »

Look at this address. There is one similar sample to D8; Just found it by chance

http://support.automation.siemens.com/W ... aller=view
Post Reply