plcforum.uz.ua

International PLC Forum
It is currently Mon Jan 16, 2017 3:54 pm

All times are UTC + 3 hours




Post new topic Reply to topic  [ 89 posts ]  Go to page 1, 2  Next
Author Message
PostPosted: Thu Sep 16, 2010 12:17 am 
Site Admin

Joined: Thu Feb 16, 2006 6:25 pm
Posts: 2819
Location: Russia
? wrote:
Hi anybody here know where can i find an activation for the GE Fanuc proficy machine edition ??..

instructions:

0. Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Keymaker: http://depositfiles.com/files/5kstsqe1y
or
http://rapidshare.com/files/441078777/QickDesigner_v3.7_AuthTool.zip
1. Run the Product Authorization of kit Proficy ME and copy Site Code.
2. Run the crack (preferably through START.CMD), enter the Site Code, press the "Generate Serial and Key Code".
3. Back to the Product Authorization, click Key Code and enter the data from the Keygen.

Quote:
Инструкция:
0. Скачать кейген из viewtopic.php?f=14&t=7176
1. Запустить Product Authorization из комплекта Proficy ME и записать Site Code.
2. Запустить кейген (желательно через START.CMD), ввести Site Code, нажать "Generate Serial and Key Code".
3. Вернуться в Product Authorization, нажать кнопку Key Code и ввести данные из кейгена.

Image



or
Send private message to Anwer Shahzad your site code ****-****
and wait .... (pm)
Use Private Message

We clean theme, and delete old requests

Quote:
hi oscarl
you sand me site code is = ????-????
I Give you Authorization for the Proficy ME = 5.9 & 6.0
from
Anwer Shahzad


Top
 Profile  
 
PostPosted: Mon Dec 13, 2010 8:58 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi vladsam
I Give you Authorization for the Proficy ME = 6.5 - for site code is = DB2E-317C
http://rapidshare.com/files/436711620/AUTHORIZ.DAT
Authorization copy in flppy and add authorization in the software OR
(1, you copy Authorization.data = in drive C:\) (2, you run the software open help) (3, product Authorization)
(4, Authoriz software) (5, Add) (6,flopply disk trancfer) ( 7, next) (8, Browse = C:\AUTHORIZ.DAT) (9, Open )
(10, Next) (11, Finish)= your software Authoriz is ok
If you change current GE Site Code to any Site Code
(1, Install the new Software in defraent PC and find site code is = ????-????)
(2, you run the software your install and Authorizd ok PC ) (3, open help) (4, product Authorization)(5,Transfer Liecense) (6,Move) (7,Ok) (8, Enter Target Site Code = ????-????) (9, Next) (10,Please re-Verify Site Code = ????-????) (11,Ok)
(12, Please Insert a blank floppy) (13, Next) (14, Finish) (15, Ok) ( your current GE Site Code Move to any Site Code )
your software Authoriz Move is ok
from (welc) (welc) (welc) (welc)
Anwer Shahzad


Last edited by anwer shahzad on Fri Mar 25, 2011 12:33 am, edited 7 times in total.

Top
 Profile  
 
PostPosted: Thu Mar 31, 2011 9:41 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi ALL
I have another problem.
I need to unlock the View Lock password on some ladder block on GE-Fanuc 9030.
Any help would be greatly appreciated Many thanks in advance

from (tyou) (tyou) (tyou)
Anwer Shahzad & maverik53


Top
 Profile  
 
PostPosted: Fri Apr 01, 2011 10:15 am 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi ALL
I turn on and turn off laptop and site code is changed = machine edition 6.5 , I have a question regarding he computer, the day yesterday prompted a license for a site code,today at turn on my computer, my site code changed again, every time I turn on and turn off my laptop my site code is changed , I have installed the software pro simatic S7 2006, rs-logix 5000 (10,11,12,13,15,16,17,18,19), machine edition 6.5, rs view machine edition, win cc v 7.5, all licenses are lost and I have to reinstall, not that it can be and let me know your point of view.

thanks in advance and greetings
from (tyou) (tyou) (tyou)
jarielg


Top
 Profile  
 
PostPosted: Wed Jun 22, 2011 4:49 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi zahidj
I Give you Authorization for the Proficy ME = 6.0 for site code is = 4064-07CF
https://rapidshare.com/files/2513319124/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Wed Jun 22, 2011 4:53 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi icipasa
I Give you Authorization for the Proficy ME = 5.6 for site code is = E74D-C361
https://rapidshare.com/files/1202121452/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 12:50 pm 

Joined: Tue Jun 28, 2011 12:46 pm
Posts: 33
Location: Padova (IT)
hi all. Is it possible to change site-code?


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 8:58 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/1868599518/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:04 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi emapcs
I Give you Authorization for the Proficy ME = 6.5 for site code is = EEB5-B09B
https://rapidshare.com/files/3320067924/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:12 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi kaii98
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4D8F-1E9A
https://rapidshare.com/files/3706559882/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:18 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi xor12
I Give you Authorization for the Proficy ME = 5.8for site code is = 3287-59F1
https://rapidshare.com/files/479410375/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:24 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi brenny
I Give you Authorization for the Proficy ME = 5.9 for site code is = C9BE-87CE
https://rapidshare.com/files/540686362/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:29 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi mneryz
I Give you Authorization for the Proficy ME for site code is = A8D6-7115
https://rapidshare.com/files/1476637297/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:42 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi luke45
I Give you Authorization for the Proficy ME =for site code is = 9DE7-2C29
https://rapidshare.com/files/3921622686/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:52 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = 86A1-A782
https://rapidshare.com/files/602232281/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 9:59 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi Oscar
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4080-7D3C
https://rapidshare.com/files/998749087/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 10:06 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi ret_y
I Give you Authorization for the Proficy ME = 6.0 for site code is = 6944-5CCA
https://rapidshare.com/files/1623845550/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 10:11 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi mikeybelt
I Give you Authorization for the Proficy ME = 6.5 for site code is = 11A3-3548
https://rapidshare.com/files/161652818/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 10:17 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi relay
I Give you Authorization for the Proficy ME = 6.0 for site code is = C35E-B78B
https://rapidshare.com/files/780886394/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jun 28, 2011 10:23 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/3571710679/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Thu Jul 07, 2011 9:25 pm 

Joined: Fri Dec 31, 2010 4:12 am
Posts: 5
Hi Anwer. (oo)

Can I please have an authorization file for Proficy ME 6.5? Site code: 3004-A355

Thanks! Greatly appreciated.


Top
 Profile  
 
PostPosted: Sat Jul 09, 2011 11:00 am 

Joined: Tue Jul 05, 2011 1:46 pm
Posts: 4
Dear Anwer Bhai
Can I have the Activation file for the proficy ME 5.6
My site Code is A80D-CFFA
Hope to get your help soon.
Waiting for your kind response.
Thanks
Mannan


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 2:53 am 

Joined: Tue Jun 28, 2011 12:45 pm
Posts: 2
The codes can be found at
http://www.megafileupload.com/en/file/319417/PME-zip.html

Thanks anwer shahzad! Hopefully you don't mind that I help with your provided code?


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 12:46 pm 

Joined: Tue Jul 05, 2011 1:46 pm
Posts: 4
The link is wrong. Pls recheck for me.

Dear Anwer,
Can you help me for the problem?
Thanks a lot in advance for your response as soon as posible.


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 1:08 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Stop this :anon: ism with wintay.dat copying and file transfer.

Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Image


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:04 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi treefort
I Give you Authorization for the Proficy ME 6.5 = for site code is = 3004-A355
https://rapidshare.com/files/893532974/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:23 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
Dear mannan Bhai or mamannan73n
I Give you Authorization for the Proficy ME 5.6 = for site code is = A80D-CFFA
https://rapidshare.com/files/1905338738/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Last edited by anwer shahzad on Tue Jul 12, 2011 8:12 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:32 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi Vagabundo
I Give you Authorization for the Proficy ME = 6.5 for site code is = 1972-D429
https://rapidshare.com/files/4134871689/AUTHORIZ.DAT
for Virtual PC is = FF75-888B
https://rapidshare.com/files/2586648744/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:38 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = A02C-649F
https://rapidshare.com/files/3139568933/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:44 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi soundview00
I Give you Authorization for the Proficy ME for site code is = F05B-21A9
https://rapidshare.com/files/265614188/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:49 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi ajmito
I Give you Authorization for the Proficy ME = 5.0 for site code is = B194-0B35
https://rapidshare.com/files/2599454270/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:54 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi desuhardy
I Give you Authorization for the Proficy ME = 5.9for site code is = 3A7D-40A2
https://rapidshare.com/files/2412832786/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 7:59 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi Civan or Ivan Castellaro
I Give you Authorization for the Proficy ME = 6.5 for site code is = 8159-2CDE
https://rapidshare.com/files/2357189648/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Tue Jul 12, 2011 8:08 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi ajmito
I Give you Authorization for the Proficy ME = 6.5 for site code is = D0F7-9823
https://rapidshare.com/files/999706598/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Wed Jul 13, 2011 2:34 pm 

Joined: Tue Jul 05, 2011 1:46 pm
Posts: 4
Thaks a lot to dear Anwer Bhai.
I completed the Authorization very well.
Thanks again.
Mannan
Bangladesh


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 5:59 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi sidik
I Give you Authorization for the Proficy ME = 6.5 for site code is = 0FCC-CF6C
https://rapidshare.com/files/786351964/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 6:04 pm 

Joined: Tue Sep 12, 2006 10:12 pm
Posts: 167
hi fulcrum
I Give you Authorization for the Proficy ME = 6.5 for site code is = 103B-4FD2
https://rapidshare.com/files/4027045585/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad


Top
 Profile  
 
PostPosted: Fri Aug 12, 2011 8:49 pm 

Joined: Fri Aug 12, 2011 8:36 pm
Posts: 1
Please can you send me activation code for Ge Fanuc Machine Edition 6.0. My site code is 519B-1DE1
Do not upload file to RapidShare. I do not have an account.
Thanks
Haas


Top
 Profile  
 
PostPosted: Thu Oct 27, 2011 3:27 am 

Joined: Thu Aug 14, 2008 8:41 pm
Posts: 4
Location: America
Hello All!
I need the key code for Motion Developer, my Proficy Machine Edition is 6.0.
I try with all autoriz.dat files in this post without luck.
my site code is: 4F41-A7A1.
thanks for your support!


Top
 Profile  
 
PostPosted: Sun Oct 30, 2011 6:29 am 

Joined: Sun Aug 10, 2008 6:27 pm
Posts: 43
Location: Philippines
Hi Anwer Shahzad,
My site code is 2E1D-CA02

Please send me authorization for Proficy ME 6.5


Top
 Profile  
 
PostPosted: Mon Feb 13, 2012 2:46 pm 

Joined: Fri Feb 10, 2012 8:24 pm
Posts: 1
my site code is 1A51-A8D7
FOR PME 6.0
please help me


Top
 Profile  
 
PostPosted: Fri May 25, 2012 12:34 am 

Joined: Wed Dec 23, 2009 11:24 am
Posts: 1
hi anwer shahzad

i need authorization code for cimplicity pme 5.9
my site code is BBA6-5C58
help me please.


Top
 Profile  
 
PostPosted: Thu Jun 14, 2012 7:13 am 

Joined: Sat Oct 24, 2009 4:20 pm
Posts: 1
I also require authorization for Proficy 5.9ME
Site Code: 9F2A-247B
Thanks


Top
 Profile  
 
PostPosted: Sat Nov 24, 2012 7:27 pm 

Joined: Fri Apr 01, 2011 10:22 am
Posts: 11
I'm looking for "Proficy Machine Edition 7.5" and "Proficy Machine Edition 7.50 SIM 1" download links.

Please Help

(sos)


Top
 Profile  
 
PostPosted: Fri Dec 14, 2012 8:38 pm 

Joined: Wed Aug 10, 2011 5:58 pm
Posts: 22
I need proficy machine edition v7.5, too!


Top
 Profile  
 
PostPosted: Thu Apr 04, 2013 9:14 am 

Joined: Wed Oct 12, 2011 5:16 am
Posts: 1
Hi Anwer.

Can I please have an authorization file for Ge Fanuc Proficy 5.00 - Cimplicity Machine Edition Site code: 5A4C-7A16 (oo)

Thanks! Greatly appreciated.


Top
 Profile  
 
PostPosted: Thu Jan 23, 2014 3:31 pm 

Joined: Thu Jan 23, 2014 3:28 pm
Posts: 9
Hello , is that someone could help me to find proficy ME for download?
thank you


Top
 Profile  
 
 Post subject: [Search button]
PostPosted: Fri Jan 24, 2014 7:42 am 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 672
Location: Belarus
See link Schtiel :
viewtopic.php?f=3&t=20042&view=previous
Good luck!


Top
 Profile  
 
PostPosted: Fri Jan 24, 2014 2:30 pm 

Joined: Fri Jan 24, 2014 2:20 pm
Posts: 3
Hi Anwer!
i need authorization code for Proficy Machine edition v5.60 Build 4083
my site code is 4AE0-F217.

Please help to provide with the keymaker/ keygen link for future use.
Many thanks!


Top
 Profile  
 
PostPosted: Sat Dec 06, 2014 4:59 pm 

Joined: Sat Dec 06, 2014 4:53 pm
Posts: 1
Hi
anybody help me for code
I want Authorization for the Proficy ME = 7 for site code is = 1E0C-D72E


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 89 posts ]  Go to page 1, 2  Next

All times are UTC + 3 hours


Who is online

Users browsing this forum: No registered users and 14 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version