[?]: activation for the GE Fanuc Proficy Machine Edition

другие контроллеры
CoMod
Site Admin
Posts: 3564
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

[?]: activation for the GE Fanuc Proficy Machine Edition

Post by CoMod » Wed Sep 15, 2010 9:17 pm

? wrote:Hi anybody here know where can i find an activation for the GE Fanuc proficy machine edition ??..
instructions:

0. Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Keymaker: http://depositfiles.com/files/5kstsqe1y
or
http://rapidshare.com/files/441078777/Q ... thTool.zip
1. Run the Product Authorization of kit Proficy ME and copy Site Code.
2. Run the crack (preferably through START.CMD), enter the Site Code, press the "Generate Serial and Key Code".
3. Back to the Product Authorization, click Key Code and enter the data from the Keygen.
Инструкция:
0. Скачать кейген из viewtopic.php?f=14&t=7176
1. Запустить Product Authorization из комплекта Proficy ME и записать Site Code.
2. Запустить кейген (желательно через START.CMD), ввести Site Code, нажать "Generate Serial and Key Code".
3. Вернуться в Product Authorization, нажать кнопку Key Code и ввести данные из кейгена.
Image



or
Send private message to Anwer Shahzad your site code ****-****
and wait .... (pm)
Use Private Message

We clean theme, and delete old requests
hi oscarl
you sand me site code is = ????-????
I Give you Authorization for the Proficy ME = 5.9 & 6.0
from
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Mon Dec 13, 2010 5:58 pm

hi vladsam
I Give you Authorization for the Proficy ME = 6.5 - for site code is = DB2E-317C
http://rapidshare.com/files/436711620/AUTHORIZ.DAT
Authorization copy in flppy and add authorization in the software OR
(1, you copy Authorization.data = in drive C:\) (2, you run the software open help) (3, product Authorization)
(4, Authoriz software) (5, Add) (6,flopply disk trancfer) ( 7, next) (8, Browse = C:\AUTHORIZ.DAT) (9, Open )
(10, Next) (11, Finish)= your software Authoriz is ok
If you change current GE Site Code to any Site Code
(1, Install the new Software in defraent PC and find site code is = ????-????)
(2, you run the software your install and Authorizd ok PC ) (3, open help) (4, product Authorization)(5,Transfer Liecense) (6,Move) (7,Ok) (8, Enter Target Site Code = ????-????) (9, Next) (10,Please re-Verify Site Code = ????-????) (11,Ok)
(12, Please Insert a blank floppy) (13, Next) (14, Finish) (15, Ok) ( your current GE Site Code Move to any Site Code )
your software Authoriz Move is ok
from (welc) (welc) (welc) (welc)
Anwer Shahzad
Last edited by anwer shahzad on Thu Mar 24, 2011 9:33 pm, edited 7 times in total.

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Thu Mar 31, 2011 6:41 pm

hi ALL
I have another problem.
I need to unlock the View Lock password on some ladder block on GE-Fanuc 9030.
Any help would be greatly appreciated Many thanks in advance

from (tyou) (tyou) (tyou)
Anwer Shahzad & maverik53

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Fri Apr 01, 2011 7:15 am

hi ALL
I turn on and turn off laptop and site code is changed = machine edition 6.5 , I have a question regarding he computer, the day yesterday prompted a license for a site code,today at turn on my computer, my site code changed again, every time I turn on and turn off my laptop my site code is changed , I have installed the software pro simatic S7 2006, rs-logix 5000 (10,11,12,13,15,16,17,18,19), machine edition 6.5, rs view machine edition, win cc v 7.5, all licenses are lost and I have to reinstall, not that it can be and let me know your point of view.

thanks in advance and greetings
from (tyou) (tyou) (tyou)
jarielg

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Wed Jun 22, 2011 1:49 pm

hi zahidj
I Give you Authorization for the Proficy ME = 6.0 for site code is = 4064-07CF
https://rapidshare.com/files/2513319124/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Wed Jun 22, 2011 1:53 pm

hi icipasa
I Give you Authorization for the Proficy ME = 5.6 for site code is = E74D-C361
https://rapidshare.com/files/1202121452/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

relay
Posts: 33
Joined: Tue Jun 28, 2011 9:46 am
Location: Padova (IT)

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by relay » Tue Jun 28, 2011 9:50 am

hi all. Is it possible to change site-code?

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 5:58 pm

hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/1868599518/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:04 pm

hi emapcs
I Give you Authorization for the Proficy ME = 6.5 for site code is = EEB5-B09B
https://rapidshare.com/files/3320067924/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:12 pm

hi kaii98
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4D8F-1E9A
https://rapidshare.com/files/3706559882/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:18 pm

hi xor12
I Give you Authorization for the Proficy ME = 5.8for site code is = 3287-59F1
https://rapidshare.com/files/479410375/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:24 pm

hi brenny
I Give you Authorization for the Proficy ME = 5.9 for site code is = C9BE-87CE
https://rapidshare.com/files/540686362/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:29 pm

hi mneryz
I Give you Authorization for the Proficy ME for site code is = A8D6-7115
https://rapidshare.com/files/1476637297/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:42 pm

hi luke45
I Give you Authorization for the Proficy ME =for site code is = 9DE7-2C29
https://rapidshare.com/files/3921622686/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:52 pm

hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = 86A1-A782
https://rapidshare.com/files/602232281/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 6:59 pm

hi Oscar
I Give you Authorization for the Proficy ME = 5.9 for site code is = 4080-7D3C
https://rapidshare.com/files/998749087/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 7:06 pm

hi ret_y
I Give you Authorization for the Proficy ME = 6.0 for site code is = 6944-5CCA
https://rapidshare.com/files/1623845550/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 7:11 pm

hi mikeybelt
I Give you Authorization for the Proficy ME = 6.5 for site code is = 11A3-3548
https://rapidshare.com/files/161652818/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 7:17 pm

hi relay
I Give you Authorization for the Proficy ME = 6.0 for site code is = C35E-B78B
https://rapidshare.com/files/780886394/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jun 28, 2011 7:23 pm

hi Martijn
I Give you Authorization for the Proficy ME = for site code is = FF9D-792F
https://rapidshare.com/files/3571710679/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

treefort
Posts: 5
Joined: Fri Dec 31, 2010 1:12 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by treefort » Thu Jul 07, 2011 6:25 pm

Hi Anwer. (oo)

Can I please have an authorization file for Proficy ME 6.5? Site code: 3004-A355

Thanks! Greatly appreciated.

mamannan73n
Posts: 4
Joined: Tue Jul 05, 2011 10:46 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by mamannan73n » Sat Jul 09, 2011 8:00 am

Dear Anwer Bhai
Can I have the Activation file for the proficy ME 5.6
My site Code is A80D-CFFA
Hope to get your help soon.
Waiting for your kind response.
Thanks
Mannan

mathijn75
Posts: 2
Joined: Tue Jun 28, 2011 9:45 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by mathijn75 » Mon Jul 11, 2011 11:53 pm

The codes can be found at
http://www.megafileupload.com/en/file/3 ... E-zip.html

Thanks anwer shahzad! Hopefully you don't mind that I help with your provided code?

mamannan73n
Posts: 4
Joined: Tue Jul 05, 2011 10:46 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by mamannan73n » Tue Jul 12, 2011 9:46 am

The link is wrong. Pls recheck for me.

Dear Anwer,
Can you help me for the problem?
Thanks a lot in advance for your response as soon as posible.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by Linkinx64 » Tue Jul 12, 2011 10:08 am

Stop this :anon: ism with wintay.dat copying and file transfer.

Download keygen for QuickDesigner/Profici ME and generate auth. key for your site code: viewtopic.php?f=14&t=7176
Image

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:04 pm

hi treefort
I Give you Authorization for the Proficy ME 6.5 = for site code is = 3004-A355
https://rapidshare.com/files/893532974/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:23 pm

Dear mannan Bhai or mamannan73n
I Give you Authorization for the Proficy ME 5.6 = for site code is = A80D-CFFA
https://rapidshare.com/files/1905338738/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad
Last edited by anwer shahzad on Tue Jul 12, 2011 5:12 pm, edited 1 time in total.

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:32 pm

hi Vagabundo
I Give you Authorization for the Proficy ME = 6.5 for site code is = 1972-D429
https://rapidshare.com/files/4134871689/AUTHORIZ.DAT
for Virtual PC is = FF75-888B
https://rapidshare.com/files/2586648744/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:38 pm

hi jurassic
I Give you Authorization for the Proficy ME = 5.6 for site code is = A02C-649F
https://rapidshare.com/files/3139568933/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:44 pm

hi soundview00
I Give you Authorization for the Proficy ME for site code is = F05B-21A9
https://rapidshare.com/files/265614188/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:49 pm

hi ajmito
I Give you Authorization for the Proficy ME = 5.0 for site code is = B194-0B35
https://rapidshare.com/files/2599454270/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:54 pm

hi desuhardy
I Give you Authorization for the Proficy ME = 5.9for site code is = 3A7D-40A2
https://rapidshare.com/files/2412832786/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 4:59 pm

hi Civan or Ivan Castellaro
I Give you Authorization for the Proficy ME = 6.5 for site code is = 8159-2CDE
https://rapidshare.com/files/2357189648/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Tue Jul 12, 2011 5:08 pm

hi ajmito
I Give you Authorization for the Proficy ME = 6.5 for site code is = D0F7-9823
https://rapidshare.com/files/999706598/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

mamannan73n
Posts: 4
Joined: Tue Jul 05, 2011 10:46 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by mamannan73n » Wed Jul 13, 2011 11:34 am

Thaks a lot to dear Anwer Bhai.
I completed the Authorization very well.
Thanks again.
Mannan
Bangladesh

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Thu Jul 14, 2011 2:59 pm

hi sidik
I Give you Authorization for the Proficy ME = 6.5 for site code is = 0FCC-CF6C
https://rapidshare.com/files/786351964/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by anwer shahzad » Thu Jul 14, 2011 3:04 pm

hi fulcrum
I Give you Authorization for the Proficy ME = 6.5 for site code is = 103B-4FD2
https://rapidshare.com/files/4027045585/AUTHORIZ.DAT
from (welc) (welc) (welc)
Anwer Shahzad

haas
Posts: 1
Joined: Fri Aug 12, 2011 5:36 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by haas » Fri Aug 12, 2011 5:49 pm

Please can you send me activation code for Ge Fanuc Machine Edition 6.0. My site code is 519B-1DE1
Do not upload file to RapidShare. I do not have an account.
Thanks
Haas

Dave2008
Posts: 4
Joined: Thu Aug 14, 2008 5:41 pm
Location: America

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by Dave2008 » Thu Oct 27, 2011 12:27 am

Hello All!
I need the key code for Motion Developer, my Proficy Machine Edition is 6.0.
I try with all autoriz.dat files in this post without luck.
my site code is: 4F41-A7A1.
thanks for your support!

Peehel
Posts: 43
Joined: Sun Aug 10, 2008 3:27 pm
Location: Philippines

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by Peehel » Sun Oct 30, 2011 3:29 am

Hi Anwer Shahzad,
My site code is 2E1D-CA02

Please send me authorization for Proficy ME 6.5

winners
Posts: 1
Joined: Fri Feb 10, 2012 5:24 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by winners » Mon Feb 13, 2012 11:46 am

my site code is 1A51-A8D7
FOR PME 6.0
please help me

ahlnus
Posts: 1
Joined: Wed Dec 23, 2009 8:24 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by ahlnus » Thu May 24, 2012 9:34 pm

hi anwer shahzad

i need authorization code for cimplicity pme 5.9
my site code is BBA6-5C58
help me please.

kylevesque
Posts: 1
Joined: Sat Oct 24, 2009 1:20 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by kylevesque » Thu Jun 14, 2012 4:13 am

I also require authorization for Proficy 5.9ME
Site Code: 9F2A-247B
Thanks

ostogradski
Posts: 11
Joined: Fri Apr 01, 2011 7:22 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by ostogradski » Sat Nov 24, 2012 4:27 pm

I'm looking for "Proficy Machine Edition 7.5" and "Proficy Machine Edition 7.50 SIM 1" download links.

Please Help

(sos)

azhw
Posts: 22
Joined: Wed Aug 10, 2011 2:58 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by azhw » Fri Dec 14, 2012 5:38 pm

I need proficy machine edition v7.5, too!

eneru
Posts: 1
Joined: Wed Oct 12, 2011 2:16 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by eneru » Thu Apr 04, 2013 6:14 am

Hi Anwer.

Can I please have an authorization file for Ge Fanuc Proficy 5.00 - Cimplicity Machine Edition Site code: 5A4C-7A16 (oo)

Thanks! Greatly appreciated.

raph_rf
Posts: 9
Joined: Thu Jan 23, 2014 12:28 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by raph_rf » Thu Jan 23, 2014 12:31 pm

Hello , is that someone could help me to find proficy ME for download?
thank you

vlad2006gr
Posts: 951
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

[Search button]

Post by vlad2006gr » Fri Jan 24, 2014 4:42 am

See link Schtiel :
viewtopic.php?f=3&t=20042&view=previous
Good luck!

ANAND1972
Posts: 3
Joined: Fri Jan 24, 2014 11:20 am

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by ANAND1972 » Fri Jan 24, 2014 11:30 am

Hi Anwer!
i need authorization code for Proficy Machine edition v5.60 Build 4083
my site code is 4AE0-F217.

Please help to provide with the keymaker/ keygen link for future use.
Many thanks!

kunal_1984
Posts: 1
Joined: Sat Dec 06, 2014 1:53 pm

Re: [?]: activation for the GE Fanuc Proficy Machine Edition

Post by kunal_1984 » Sat Dec 06, 2014 1:59 pm

Hi
anybody help me for code
I want Authorization for the Proficy ME = 7 for site code is = 1E0C-D72E

Post Reply