Kewei LP1-08M08R

другие контроллеры
Post Reply
SPECCYC
Posts: 1
Joined: Sat Jan 04, 2020 11:48 am

Kewei LP1-08M08R

Post by SPECCYC » Mon Jan 06, 2020 8:14 am

Hello!
There is a Kewei LP1-08M08P PLC. I can not connecting for upload parameters from PLC.
http://www.kwzk.com/Introduce.asp?id=42 ... %B5%C1%D0 On the manufacturer’s page there is a scheme for connecting to COM0. I connected to PLC is KWPro v1.2.4.8 software. I used the mini DIN 8 connector (AF-2180 (MDN-8M) (KLS1-294-M-8-B). I used the RS232 (RX and TX signal) for connecting in USB-COM adapter ICPCON i-7561.
What am I doing wrong and how to connect to the PLC?

Post Reply