OP177a password

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
swenku
Posts: 3
Joined: Sat Aug 03, 2019 11:57 am

OP177a password

Post by swenku » Sat Aug 03, 2019 12:26 pm

Hi,

is there any chance to get a password out of an prosave .psb file of this old HMI.

I bought a machine spent all of my money and they sold me this without any password, now I cant adjust parameters.


any help?


Thank You

Guille
Posts: 22
Joined: Fri Oct 03, 2008 2:17 am
Location: America

Re: OP177a password

Post by Guille » Sat Aug 03, 2019 6:09 pm

Have you tried with the standard password: 100 and username Admin?

Maybe you can try with this:

https://support.industry.siemens.com/tf ... ageSize=10

swenku
Posts: 3
Joined: Sat Aug 03, 2019 11:57 am

Re: OP177a password

Post by swenku » Sun Aug 04, 2019 11:00 am

Guille wrote:
Sat Aug 03, 2019 6:09 pm
Have you tried with the standard password: 100 and username Admin?

Maybe you can try with this:

https://support.industry.siemens.com/tf ... ageSize=10
Have done already, the panel says (not_allow)

Thank you for the link will try this!

Post Reply