AB RSlogix500 timer bit

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
sandumon84
Posts: 22
Joined: Thu Dec 18, 2014 4:52 pm

AB RSlogix500 timer bit

Post by sandumon84 » Thu Jan 03, 2019 8:58 am

Hi,

As I just upgrading the AB PLC to Siemens PLC I have small doubt regarding the logic

In the logic there is a TON timer with 900sec preset and most of the rungs used a bit .ACC/0 bit , when I tried to simulate the logic it is showing blinking like every second. In siemens I believe we can use the clock pulse to implement this. Am I correct?


Regards
Sandeep

Guille
Posts: 17
Joined: Fri Oct 03, 2008 2:17 am
Location: America

Re: AB RSlogix500 timer bit

Post by Guille » Mon Jan 28, 2019 3:03 pm

In AB the timers use the time value in ms. 900 means 900ms. Use the bit TIME.DN to perform an action when the timer expire.

Post Reply