automation studio 6.0 x64 professional edition

обсуждение прочих программных продуктов:
Тools, Elcad, Eplan, ...
Post Reply
zozonon
Posts: 1
Joined: Sat Nov 22, 2014 3:52 am

automation studio 6.0 x64 professional edition

Post by zozonon » Sat Nov 22, 2014 1:58 pm

i have an automation studio 6.0 x64 professional edition install file.
but, i couldn't find the crack file.
please help me....

fragolan
Posts: 1
Joined: Wed Oct 07, 2015 8:04 am

Re: automation studio 6.0 x64 professional edition

Post by fragolan » Wed Oct 07, 2015 8:07 am

Hi there,
could you post some download link for instalation. There is no crack for the software curently, but I have team which could try to make working version

Torteski
Posts: 1
Joined: Tue Feb 24, 2015 8:35 pm

Re: automation studio 6.0 x64 professional edition

Post by Torteski » Tue Oct 13, 2015 9:05 pm

Version 6 https://torrentz.eu/8ef7c0cf148e0c335d0 ... f01f66fc33
Version 6.1 x32 http://www.jheberg.net/captcha/pas32izfte61020030/
Version 6.1 x64 http://www.jheberg.net/captcha/pas64izfte61020030/

The first one has some "Crack" but directional valves do not work (software crashes when you try to use it). And Directional controll is 95% of the use for the software. I searched the web for a long time and I am pretty sure there is no working crack for this software. If you make one a lot of people would be very grateful.
There is a working 5.6 student version.
Write if you need any more links, information or any type of help.

Thank you

engmann18
Posts: 5
Joined: Tue Jun 09, 2015 1:14 am

Re: automation studio 6.0 x64 professional edition

Post by engmann18 » Fri Dec 11, 2015 8:23 pm

the crack for version 6 is ok but direction valve dont work. what you have to do is to download the library of version 5.2 and open it in the library of version 6 and you can get all the valve from there which work correctly

Edgar_Wine
Posts: 7
Joined: Thu Apr 07, 2016 2:25 pm

Re: automation studio 6.0 x64 professional edition

Post by Edgar_Wine » Tue Apr 12, 2016 4:45 pm

All links are dead... :C

zolanzs
Posts: 2
Joined: Tue Jul 03, 2018 1:12 pm

Re: automation studio 6.0 x64 professional edition

Post by zolanzs » Tue Jul 03, 2018 1:21 pm

engmann18 wrote:the crack for version 6 is ok but direction valve dont work. what you have to do is to download the library of version 5.2 and open it in the library of version 6 and you can get all the valve from there which work correctly
V6 doesn't have Libraries folder, what files do I need to replace ?
I tried replacing just Main.xml and i see all the valves but can't change them...



Thanks in advance

TheoPap
Posts: 10
Joined: Sun Jun 04, 2017 11:03 pm

Re: automation studio 6.0 x64 professional edition

Post by TheoPap » Tue Jul 03, 2018 5:37 pm

Try this solution for not working components. Watch the video from 05:22 minute (it's in Spanish but it doesn't matter), download the files for hydraulic,pneumatic,servo components .prx (links are below the video) and do what exactly show. For me it works.

https://www.youtube.com/watch?v=5E-7NFf5NkA&t=165s

Maybe this help you too (but you need the .prx files (link to download below the video)
Solution for not working components (directional valves & servovalves)
Open A.S -> In Library Explorer hit New Library (give a name) -> New category (give a name) -> Open a new project with standard documents and open the folder with working components -> After open select them all and drag and drop in the Library Explorer empty window under defined category name -> Do the same for all working components files -> Last hit Save Library and save them in Catalogues And Libraries as *.prl* files (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries)

zolanzs
Posts: 2
Joined: Tue Jul 03, 2018 1:12 pm

Re: automation studio 6.0 x64 professional edition

Post by zolanzs » Mon Jul 09, 2018 1:29 pm

TheoPap wrote:Try this solution for not working components. Watch the video from 05:22 minute (it's in Spanish but it doesn't matter), download the files for hydraulic,pneumatic,servo components .prx (links are below the video) and do what exactly show. For me it works.

https://www.youtube.com/watch?v=5E-7NFf5NkA&t=165s

Maybe this help you too (but you need the .prx files (link to download below the video)
Solution for not working components (directional valves & servovalves)
Open A.S -> In Library Explorer hit New Library (give a name) -> New category (give a name) -> Open a new project with standard documents and open the folder with working components -> After open select them all and drag and drop in the Library Explorer empty window under defined category name -> Do the same for all working components files -> Last hit Save Library and save them in Catalogues And Libraries as *.prl* files (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries)
Thanks ! (pgood)
Just one more thing, I created and saved *.prl* files but each time I exit Automation Studio and start it again it automatically loads only Main library, and can't load previously created library.

TheoPap
Posts: 10
Joined: Sun Jun 04, 2017 11:03 pm

Re: automation studio 6.0 x64 professional edition

Post by TheoPap » Mon Jul 09, 2018 3:45 pm

For me it's work and every time i re-open A.S.6.0. the main and the new created library for working components loaded. Follow the steps as described above and in the video and i hope you solve your problem. Save it in the correct path (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries) and rename it as .prl.

zdcbetter
Posts: 1
Joined: Fri Aug 01, 2014 8:57 am

Re: automation studio 6.0 x64 professional edition

Post by zdcbetter » Mon Jul 23, 2018 2:24 am

Could you tell me the files for hydraulic,pneumatic,servo components .prx download links? thx

whalua
Posts: 3
Joined: Thu Dec 22, 2011 9:20 pm

Re: automation studio 6.0 x64 professional edition

Post by whalua » Tue Jul 24, 2018 3:41 pm

It also happens to me that the created library is not automatically reopened when I relaunch the automation studio.
Also if I try to change the characteristics of a component recovered from the library (for example a 3/2 valve) using the builder, when I try to apply the changes a window appears that tells me that the component is unknown or invalid

pakasi
Posts: 2
Joined: Tue Oct 01, 2019 9:13 am
Location: INDONESIA

Re: automation studio 6.0 x64 professional edition

Post by pakasi » Tue Oct 01, 2019 9:57 am

Torteski wrote:
Tue Oct 13, 2015 9:05 pm
Version 6 https://torrentz.eu/8ef7c0cf148e0c335d0 ... f01f66fc33
Version 6.1 x32 http://www.jheberg.net/captcha/pas32izfte61020030/
Version 6.1 x64 http://www.jheberg.net/captcha/pas64izfte61020030/

The first one has some "Crack" but directional valves do not work (software crashes when you try to use it). And Directional controll is 95% of the use for the software. I searched the web for a long time and I am pretty sure there is no working crack for this software. If you make one a lot of people would be very grateful.
There is a working 5.6 student version.
Write if you need any more links, information or any type of help.

Thank you
The patch was not programmed well, that is the problem why Directional Valve not appear, if someone wanna try (assumed already patched), look for file named AteHydrcmp.cmp at Automation Studio directory and cut/paste it to anywhere then rename the AteHydrcmp.cmp.BAK (this is the original file) to AteHydrcmp.cmp. unfortunately due to unmatched license between the software and the library it will read as unknown component and make every directional valve symbol as a same symbol. i have been looking for software that could read .cmp file but i not sure i can rewrite it because this is the first time i heard about .cmp, the software name is HotDocs or just google it.

Post Reply