plcforum.uz.ua

International PLC Forum
It is currently Wed Aug 31, 2016 3:21 am

All times are UTC + 3 hours




Post new topic Reply to topic  [ 139 posts ]  Go to page Previous  1, 2, 3  Next
Author Message
PostPosted: Tue Dec 28, 2010 2:24 am 

Joined: Tue Dec 28, 2010 2:14 am
Posts: 1
English http://translate.google.com/translate?j ... 0%23p41070
Under W7 x64 native tablet does not work - if you disable UAC hardlock not start - issued a system error 1275, but ...

All earned by W7 Ultimate x64. The drug took away: http://depositfiles.com/files/69h5ibih0 .
The only thing I would like - to correct statement:

For normal installation, you must disable UAC.

1. Install Eplan P8 2.0.5.4602, required setting the "management rights" from the "examples / basic data" if the installation does not deliver, it just pops up and the message: "Information Rights Management is currently unavailable. The database file is missing or broken access to the file. As to infringement can not be established unequivocally, it is impossible to run the program.
2. Copy the license file (SN-U10225.EGF) from folder to folder EPLAN_P8_2.0_patch_Windows_x32x64 C: \ User \ Public \ Eplan \ Common \;
3. Remove driver protection HL Hasp Control Panel - Programs and Features (Right-click on Eplan License Manager - Edit, then do the hardware key driver is unavailable);
4. Install newer drivers HASPUserSetup.exe;
5. 5189.reg run the file and add data to the registry;
6. Run the driver installation Multikey - emulator from your Release \ MultiKey64 \ install.cmd;
7. Run a test mode in Windows 7 x64 dseo13b.exe running the program and the radio button for "Enable Test Mode".
By the way, just note that here also provides the opposite effect "Disable Test Mode", disable the test mode;
8. In one corner will display "Test Mode Windows 7 Rekease 7600;
9. 9. Run the program dseo13b.exe;
10. 10. Add a digital signature for the driver Multikey.
To do this, select "Sign a System File" and enter the filename including the full path C: \ Windows \ System32 \ Drivers \ multikey.sys, test mode does not turn off!
11. Reboot your computer;
12. Start the EPLAN Electric P8 2.0.5.4602 and enjoy his work

In Russian

Под W7 x64 родная таблетка не действует - при отключении UAC hardlock не запускается - выдается системная ошибка 1275, но...

Под W7 Ultimate x64 все заработало. Лекарство взял отсюда: http://depositfiles.com/files/69h5ibih0.
Единственное что хотелось бы - поправить инструкцию:

Для нормальной установки необходимо отключить UAC.

1. Устанавливаем Eplan P8 2.0.5.4602, обязательно установив "управление правами" из раздела "примеры/основные данные" если при установке не поставить, то как раз и выскакивает сообщение: "Данные управления правами в настоящий момент недоступны. Файл базы данных отсутствует, либо нарушен доступ к этому файлу. Поскольку причину нарушения не удается установить однозначно, запустить программу невозможно."
Image;
2. Копируем файл лицензии (SN-U10225.EGF) из папки EPLAN_P8_2.0_patch_Windows_x32x64 в папку C:\User\Public\Eplan\Common\;
3. Удаляем драйвер защиты HL Hasp в Панель управления - Программы и компоненты(правой кнопкой по Eplan License Manager - Изменить, далее сделать недоступным драйвер аппаратного ключа);
4. Устанавливаем более новые драйвера HASPUserSetup.exe;
5. Запускаем файл 5189.reg и добавляем данные в реестр;
6. Запускаем установку драйвера Multikey - эмулятора из папки Release\MultiKey64\install.cmd;
7. Включаем тестовый режим Windows 7 x64 запустив программу dseo13b.exe и установив переключатель в положение "Enable Test Mode". Кстати, сразу отметим, что здесь же предусмотрено обратное действие "Disable Test Mode", отключающее тестовый режим;
8. Перезагружаем компьютер. В углу появится надпись “Тестовый режим Windows 7 Cборка 7600”;
9. Запускаем программу dseo13b.exe;
10. Добавляем цифровую подпись для драйвера Multikey. Для этого выбираем "Sign a System File" и вводим имя файла, включая полный путь C:\Windows\System32\Drivers\multikey.sys, тестовый режим не выключаем!!!
11. Перезагружаем компьютер;
12. Запускаем EPLAN Electric P8 2.0.5.4602 и наслаждаемся его работой


Top
 Profile  
 
PostPosted: Thu Jan 13, 2011 1:02 pm 

Joined: Thu Feb 28, 2008 9:20 pm
Posts: 2
Location: Bosnia and Herzegovina
Does anybody have crack with 3d import option for Eplan 2.0 . Operation system XP x64


Top
 Profile  
 
PostPosted: Mon Jan 17, 2011 11:54 pm 

Joined: Sat Dec 11, 2010 4:21 am
Posts: 2
I made all until this step:

6. Run the driver installation Multikey - emulator from your Release \ MultiKey64 \ install.cmd;

... and obtain a dos windows saying:

"No devices were removed
devcon failed."

and in effect i can't find any multikey file in the c:windows/system32 nor in c:windows/sysWOW64
have you any idea about the problem? my system is of course win7 64bit professional

strangely the "install.cmd" in the MultiKey32 directory seem to work, ... no message error but no multikeys file in any case is installed where it have to

pls anyone can help?
eplan p8 2.0 can work or not under windows 7 64bit (sincerely still i haven't understood this)

thx for your work


Top
 Profile  
 
PostPosted: Thu Jan 20, 2011 11:10 am 

Joined: Thu Jan 20, 2011 10:45 am
Posts: 11
how can i get eplan electric and cabinet work together.
if i use the setup.bat i can't run cabinet until i start dongle service. if i start this dongle emulator the electric give me no licence. (h) (wow)

version 2.0.5 have two seperate cracks can't be together in same time.
version 1.9.5 have the same crack. and it works perfectly.


Top
 Profile  
 
PostPosted: Thu Jan 20, 2011 10:13 pm 

Joined: Tue Mar 25, 2008 10:20 pm
Posts: 7
Location: Europe
Only2006 wrote:
I made all until this step:
6. Run the driver installation Multikey - emulator from your Release \ MultiKey64 \ install.cmd;...

Hi,

I had the same problem. You must copy all files from directory \MultiKey64 to \Windows\system32 and then start install.cmd
After this its work fine.

:D


Top
 Profile  
 
PostPosted: Tue Feb 15, 2011 5:18 pm 

Joined: Tue Dec 28, 2010 2:04 pm
Posts: 1
Can you please tell me how to stop all emulators and cracks once I already run setup? I have original dongle but now it does not work. How can I stop this emulator and run eplan with my original dongle?

If i delete SN-U10225.EGF from common folder it does nothing.


Top
 Profile  
 
PostPosted: Tue Mar 22, 2011 8:42 pm 

Joined: Tue Mar 22, 2011 8:28 pm
Posts: 1
cracking of this program do not understand :(...how this program cracking??? As illustrated explanation of..please..


Top
 Profile  
 
PostPosted: Sat Mar 26, 2011 8:49 pm 

Joined: Sun May 16, 2010 11:00 am
Posts: 2
Can anybody help me?
I've got already installed P8 1.9.10 (3725) and Cabinet 1.9.5 (or .6 don't remember now) + 5.5 or 5.7 - doesn't matter. I installed P8 2.0.5 4602 w/o any problems, I copied all .FST and .EFG to the folders where they should be and...
when clicking EPlan 2.0 icon twice - nothing happens. Task manager shows for a few seconds that W3U.EXE starts, but suddenly it disappears.

Why can't I even see EPLAN starting screen?

What am I doing wrong? Should I firstly remove old 1.9.10 version, before I install 2.0 or what?

PS.
Dongle emulator 1.9 is stopped and disabled.

PS2.
I forgot to write : system is WinXP SP2...


Top
 Profile  
 
PostPosted: Wed Mar 30, 2011 10:23 pm 

Joined: Sun May 16, 2010 11:00 am
Posts: 2
Nobody knows the answer for my question?

Maybe the problem is with some hardware requirement (?).
Eplan official website is "under reconstruction", so I can't check what are minimum system requirements to start P8 2.0.
hmmm...
But is it possible that 2.0 needs much more "power" than 1.9 SP1?

PS.
I found the reason of the problem. EPLAN 2.0 works only at processors with SSE2, so my old XP2500+ Barton can't run this program :/ .


Top
 Profile  
 
PostPosted: Fri Apr 15, 2011 7:53 pm 

Joined: Fri Jul 06, 2007 5:56 pm
Posts: 8
Location: Germany
Hi

i can´t make it work on Win7 x64. i don´t understand what you mean with "Right-click on Eplan License Manager - Edit, then do the hardware key driver is unavailable"
"Right click on Eplan License Manager - Edit" this is clear so far, but the rest is very bad english....
what do you mean with " then do the hardware key driver is unavailable" ???


Top
 Profile  
 
PostPosted: Sat Apr 16, 2011 12:22 am 

Joined: Sun May 28, 2006 1:28 pm
Posts: 94
Location: Bosnia&Hercegovina
Deimos wrote:
Hi

i can´t make it work on Win7 x64. i don´t understand what you mean with "Right-click on Eplan License Manager - Edit, then do the hardware key driver is unavailable"
"Right click on Eplan License Manager - Edit" this is clear so far, but the rest is very bad english....
what do you mean with " then do the hardware key driver is unavailable" ???


hi, new solution is released in this site http://www.eplan-eb2.ys168.com/ try new solution then post again.


Top
 Profile  
 
PostPosted: Sun Apr 17, 2011 11:38 am 

Joined: Fri Jul 06, 2007 5:56 pm
Posts: 8
Location: Germany
Hi

Thank you very much for your answer. But your manual is in chinese! i don´t understand your manual.


Top
 Profile  
 
PostPosted: Sun Apr 17, 2011 12:17 pm 

Joined: Sun May 28, 2006 1:28 pm
Posts: 94
Location: Bosnia&Hercegovina
Deimos wrote:
Hi

Thank you very much for your answer. But your manual is in chinese! i don´t understand your manual.


http://x7.to/l4jxqs try this


Top
 Profile  
 
PostPosted: Tue Apr 19, 2011 3:55 pm 

Joined: Fri Jul 06, 2007 5:56 pm
Posts: 8
Location: Germany
i could not fix it this way. Strange; on an other system, the crack worked fine, on mine, it doesn´t. After every reboot, the device manager showed the "SafeNet Hardlock key" with a "!". i tried several hours, but nothing worked. I had to copy all important files from the first system to mine, reboot, and worked.

Thanx anyway for your affort.


Top
 Profile  
 
PostPosted: Wed Apr 20, 2011 5:20 pm 

Joined: Sun Sep 07, 2008 5:07 am
Posts: 28
Location: Europe
Hello,
I tryed to install Eplan P8 2.0.5.4602+Crack. Installation went fine but when i am trying to open Eplan it is asking me to validate a licence. I have also intall the SP1 patch. Can you please help me guys. Thank you


Top
 Profile  
 
PostPosted: Fri Apr 22, 2011 2:32 pm 

Joined: Sun Sep 07, 2008 5:07 am
Posts: 28
Location: Europe
hello, please can anybody help me. I am trying to install it on window 7 professionel. :(


Top
 Profile  
 
PostPosted: Wed Apr 27, 2011 8:54 pm 

Joined: Tue Feb 02, 2010 7:33 pm
Posts: 8
Hi...

i have been using Eplan 1.9.6 but have been some time since the last time i used it so i am not completely up to date on what is going on with Eplan.
I just downloaded the new one 2.0. I want to know how is it with the Eplan 2.0 and Eplan cabinet. Is there also a new version of Cabinet or is it working with the old one???

Thank you very much!

Bye!


Top
 Profile  
 
PostPosted: Wed May 25, 2011 10:46 pm 

Joined: Thu Feb 26, 2009 2:46 pm
Posts: 10
Location: Minas Gerais, Brazil
Tanks man !!


Top
 Profile  
 
PostPosted: Tue Jun 07, 2011 8:38 pm 

Joined: Fri Mar 26, 2010 10:14 am
Posts: 19
As far as I understand, installation should be started without those "Test mode", it should be enabled only after certain steps. Maybe thats just your case.

By the way, to enyone, who is annoyed with "test mode". First link google gave me was: http://www.raymond.cc/blog/archives/200 ... 4-bit-x64/ with description of few methods. I like this one: http://www.citadelindustries.net/ReadyDriverPlus/ . But in this case you might be annoyed with modified loader.


Top
 Profile  
 
PostPosted: Wed Jun 22, 2011 8:38 pm 

Joined: Thu Jan 20, 2011 10:45 am
Posts: 11
please experts (oo) (oo) (oo) (oo) (oo) (oo) (oo)
do me a favor and tell me how to use this with windows 7 x64. I'm working with eplan for the last four years. i knew the crack of setup.bat working but only in x86.
some one can do a simple video for it or some screen shots. (wow) (wow) (h) (h)

i'm trying the long way for one month till now. each time i said may be i do a mistake but i could't get it work. someone confirm that it work with windows 7 x64 :anon: :haha:

"3. Remove driver protection HL Hasp Control Panel - Programs and Features (Right-click on Eplan License Manager - Edit, then do the hardware key driver is unavailable)"

there is no license manager only eplan licence client. some can help me?


Top
 Profile  
 
PostPosted: Wed Jul 06, 2011 2:44 pm 

Joined: Fri Apr 02, 2010 9:19 pm
Posts: 17
Hi all,

This week i'm following a course for eplan.

On our laptops we have the latest eplan version and a full license dongle in the back.

Can somenone please provide me a how to and the tools to dump this dongles

Thx in advance


Top
 Profile  
 
PostPosted: Wed Jul 06, 2011 3:50 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Quote:
Can somenone please provide me a how to and the tools to dump this dongles
Dongle monitoring/dumping tools you can find here: http://www.dongla.net/download.html

This topic will be helpful: http://www.reteam.org/board/archive/index.php?t-565.html


Top
 Profile  
 
PostPosted: Thu Jul 07, 2011 3:11 pm 

Joined: Fri Apr 02, 2010 9:19 pm
Posts: 17
Thx for the info

I've been busy the last 24h to try the dump al te sticks but it doesn't seem to work.

Ive tried toro and i get the errors 2 and 6

I cant monitor anything.

Its on a original xp sp3 system

On a vmware session it is te same story.

Does someone know this problem?

Or is it something else that i have to take in account?

I would be a shame not be able to dump . These dongles are fully licensed.


Top
 Profile  
 
PostPosted: Thu Jul 07, 2011 4:42 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
I will try with my dongle tomorrow and send you "step-by-step" procedure and needed software.
But my dongle is for e-Plan 1.9 , maybe they had changed protector already.


Top
 Profile  
 
PostPosted: Fri Jul 08, 2011 10:08 am 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Step-by-step:
1. HASP HL Drivers: http://www.dongla.net/storage/dongles/H ... _setup.zip
Download, install it and restart PC

2. ToRo Alladine Dongle Monitor: http://www.dongla.net/storage/dongles/haspmon32.zip
Download and install it. Find in UsbFilter "UsbFilter_Install.inf". Right-click it and select "Install" from the context menue. Restart PC on request

3. Run ToRo Alladine Dongle Monitor and run ePlan. In the TORO's log window see for Hardlock_In MODAD.
Write down MODAD

4. Download and unpack HL Dump: http://www.dongla.net/storage/dongles/hl-dump.zip
Run hl-dump.exe. Type your MODAD and press Enter (hex or decimal, better decimal).
Image
Wait when dumping finished, it wil takes a few minutes

5. At the end of dumping type description (e.g. "eplan") and press enter to close console

6. You will find MYLOCK.REG in same folder where hl-dump.exe

7. Download and launch MyLock FST Builder: http://www.dongla.net/storage/dongles/m ... uilder.zip
and convert your .REG to .FST

8. Create new folder (let's call it "eCrack") and copy there MYLOCK.FST

9. Copy all .EGF files from C:\Documents and Settings\All Users\Application Data\EPLAN\Common\ (C:\Users\Public\EPLAN\Common in Win7/Vista) to eCrack

10. Download hardlock emulator: http://www.eplan-eb2.ys168.com/
and copy hardlock.sys and SETUP.BAT to eCrack as well

11. Run SETUP.BAT


Top
 Profile  
 
PostPosted: Sat Jul 09, 2011 3:25 pm 

Joined: Fri Apr 02, 2010 9:19 pm
Posts: 17
Special thanks to you Linkinx64, for your time and effort!!!

Unfortunately in the classroom, someone has noticed the things i was doing and during the lunchbreak he talked about it at the table.
The teacher was immediately suspicious and all of our laptops were taken and placed in front of the classroom.
And all afternoon long he came checking our pc's to see what we where doing.

I'm really sorry that i couldn't make it in time.


Top
 Profile  
 
PostPosted: Sat Jul 09, 2011 5:25 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
Hello u all,

I do get an error message on step 1
Image

after that i get an error message at step 3, but this is OK, as I have not fulfilled step 1

Image

please advice. I am running win 7 64 bit Ultimate

many thanks!

UPDATE:
The walkthrough of Interlock works 100%


Top
 Profile  
 
PostPosted: Sat Jul 09, 2011 7:46 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
Hello to all

can somebody update the dongle modules?

I am interested into the ones in red

Image

many thanks


Top
 Profile  
 
PostPosted: Wed Jul 13, 2011 1:43 am 

Joined: Tue Jul 12, 2011 8:48 pm
Posts: 4
I tried to install following instructions but I don't get full license. When I start the EPLAN_Electric_P8_2.0_Emulator and run the setup.bat it says Hardlock is running. What do I wrong?

Note: When I installed eplan p8 1.9.10 and try to run the hardlock emulator I get error message 1275.
I have windows 7 64bit home edition.

Could someone help me please?


Top
 Profile  
 
PostPosted: Wed Jul 13, 2011 11:20 am 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
open command prompt

write "net stop hardlock"

then do what is in "Interlock's" post (the top of the page)

then it should work

if it's not working, open again cmd and write "net start hardlock".

keep us posted :)

PS.
Does anyone have any idea about other license keys available in internet for EPLAN? I really need a license key with the Autocad Inventor modules.

Many thanks.


Top
 Profile  
 
PostPosted: Wed Jul 13, 2011 6:54 pm 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
(not_allow)
Hi,I have a lot of problem to install Dongle Emulator.
During the installation of HUSP_HL_Driver I have a message "Installation Failed"
During the USBFilter Installation,click dx - install, I have not problem but when restart I have a problem with the startup and The Toro Alladin Dongles Monitor don't connect.I have this message
OPENING HARDLOCKFILTER(......\HASPMON32\HARDLOCKFILTER.SYS)error 6.
My System is WIN7 64Bit
Can you helpme?
I need,if is possible,the procedure that i can tested with my machine.
Thanks


Top
 Profile  
 
PostPosted: Wed Jul 13, 2011 9:07 pm 

Joined: Tue Jul 12, 2011 8:48 pm
Posts: 4
Thanks for your reply.

Everything what you said is written in setup.bat when I run this it says hardlock is running. But I have still no license. I did everything in "Interlock's" post.
Could someone help me?

Image


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 12:12 am 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
Lars1111 wrote:
Thanks for your reply.

Everything what you said is written in setup.bat when I run this it says hardlock is running. But I have still no license. I did everything in "Interlock's" post.
Could someone help me?

Image


download this EPLAN_Electric_P8 2.0 Emulator(2010-08-25).rar from http://www.eplan-eb2.ys168.com/

run setup.bat

if it does not work, PM me ;)


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 12:41 am 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
PDLFFALF wrote:
news crack:
http://www.eplan-eb2.ys168.com

"Net Based Wiring" cracked.


can someboady please post a link to the license key. It's written that it also contains some aditional options for Autocad Inventor

Many thanks


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 11:28 am 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
Hi all,
I can't work with Eplan.Dongle Emulator installation isn't good.I have test again Toro Emulator connection but the result in terrible.I have test on another PC with the same result.
Are you sure that fine well in win 7 64 bit.
Please help me


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 12:17 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
BULBO wrote:
I have test again Toro Emulator connection but the result in terrible.I have test on another PC with the same result.
Are you sure that fine well in win 7 64 bit.
On Windows XP SP3 x86 it works fine - tested. Should work on Win7 x32 as well.
64-bit Windows require 64-bit drivers (kernel-mode drivers at least), so it may influence on Toro.
Dump your dongle with Windows XP. Later converted .reg-file (.fst-file) with hardlock emulator can be used on Win7 x86 7 x64.


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 12:31 pm 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
Ok thanks,I have no problem with XP.EPL 2.0.9 work fine.
Can you show me which is the procedure?
My-lock Builder is the right program for .reg/.fst
Thanks


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 7:30 pm 

Joined: Tue Jul 12, 2011 8:48 pm
Posts: 4
@sadefa there is no such file on that website. I have already de setup.bat file, when I run this it says hardlock is running but I stille have no license. I have tested on a win7 x86 and works fine. But win7 64 bit does not work.

@Linkinx64 which driver do we need to install? Where can I download the driver?

Thanks.


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 7:48 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Lars1111 wrote:
which driver do we need to install? Where can I download the driver?

Toro dongle monitor uses Usb Filter driver. Driver name: AladdinUsbFilter.sys
I think no such driver for 64-bit yet. I not found it in search engines.. (Google, Bing, Yandex etc.) So, I think at the moment dongle dump can be done with 32-bit Windows only...


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 8:06 pm 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
:D
Many many thanks.I wait new driver.I reinstall XP and work with this.If you have a news,please contact me.
Bye


Top
 Profile  
 
PostPosted: Thu Jul 14, 2011 11:24 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
Linkinx64 wrote:
Lars1111 wrote:
which driver do we need to install? Where can I download the driver?

Toro dongle monitor uses Usb Filter driver. Driver name: AladdinUsbFilter.sys
I think no such driver for 64-bit yet. I not found it in search engines.. (Google, Bing, Yandex etc.) So, I think at the moment dongle dump can be done with 32-bit Windows only...

well there is something that might make your EPLAN work on 64x. I have a 64x and it works. read my previous post


Top
 Profile  
 
PostPosted: Fri Jul 15, 2011 6:54 am 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
sadefa wrote:
well there is something that might make your EPLAN work on 64x.

EPLAN and EPLAN emulator work with x64. Toro doesn't work.


Top
 Profile  
 
PostPosted: Fri Jul 15, 2011 8:51 pm 

Joined: Tue Jul 12, 2011 8:48 pm
Posts: 4
YES! It works I don't know what I did wrong but it works finally!
Thanks guys for this great up!

(gpost)


Top
 Profile  
 
PostPosted: Mon Jul 18, 2011 10:45 am 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
(boom)
Hi all,
I don't understand but with win 7 64 i can't works fine.Licence manager don't see the key.
Please give me the exatly procedure for win 7 64bit.
Thanks


Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 2:21 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
Use this:
Quote:
English http://translate.google.com/translate?j ... 0%23p41070
Under W7 x64 native tablet does not work - if you disable UAC hardlock not start - issued a system error 1275, but ...

All earned by W7 Ultimate x64. The drug took away: http://depositfiles.com/files/69h5ibih0 .
The only thing I would like - to correct statement:

For normal installation, you must disable UAC.

1. Install Eplan P8 2.0.5.4602, required setting the "management rights" from the "examples / basic data" if the installation does not deliver, it just pops up and the message: "Information Rights Management is currently unavailable. The database file is missing or broken access to the file. As to infringement can not be established unequivocally, it is impossible to run the program.
2. Copy the license file (SN-U10225.EGF) from folder to folder EPLAN_P8_2.0_patch_Windows_x32x64 C: \ User \ Public \ Eplan \ Common \;
3. Remove driver protection HL Hasp Control Panel - Programs and Features (Right-click on Eplan License Manager - Edit, then do the hardware key driver is unavailable);
4. Install newer drivers HASPUserSetup.exe;
5. 5189.reg run the file and add data to the registry;
6. Run the driver installation Multikey - emulator from your Release \ MultiKey64 \ install.cmd;
7. Run a test mode in Windows 7 x64 dseo13b.exe running the program and the radio button for "Enable Test Mode".
By the way, just note that here also provides the opposite effect "Disable Test Mode", disable the test mode;
8. In one corner will display "Test Mode Windows 7 Rekease 7600;
9. 9. Run the program dseo13b.exe;
10. 10. Add a digital signature for the driver Multikey.
To do this, select "Sign a System File" and enter the filename including the full path C: \ Windows \ System32 \ Drivers \ multikey.sys, test mode does not turn off!
11. Reboot your computer;
12. Start the EPLAN Electric P8 2.0.5.4602 and enjoy his work

In Russian
Под W7 x64 родная таблетка не действует - при отключении UAC hardlock не запускается - выдается системная ошибка 1275, но...

Под W7 Ultimate x64 все заработало. Лекарство взял отсюда: http://depositfiles.com/files/69h5ibih0.
Единственное что хотелось бы - поправить инструкцию:

Для нормальной установки необходимо отключить UAC.

1. Устанавливаем Eplan P8 2.0.5.4602, обязательно установив "управление правами" из раздела "примеры/основные данные" если при установке не поставить, то как раз и выскакивает сообщение: "Данные управления правами в настоящий момент недоступны. Файл базы данных отсутствует, либо нарушен доступ к этому файлу. Поскольку причину нарушения не удается установить однозначно, запустить программу невозможно."
;
2. Копируем файл лицензии (SN-U10225.EGF) из папки EPLAN_P8_2.0_patch_Windows_x32x64 в папку C:\User\Public\Eplan\Common\;
3. Удаляем драйвер защиты HL Hasp в Панель управления - Программы и компоненты(правой кнопкой по Eplan License Manager - Изменить, далее сделать недоступным драйвер аппаратного ключа);
4. Устанавливаем более новые драйвера HASPUserSetup.exe;
5. Запускаем файл 5189.reg и добавляем данные в реестр;
6. Запускаем установку драйвера Multikey - эмулятора из папки Release\MultiKey64\install.cmd;
7. Включаем тестовый режим Windows 7 x64 запустив программу dseo13b.exe и установив переключатель в положение "Enable Test Mode". Кстати, сразу отметим, что здесь же предусмотрено обратное действие "Disable Test Mode", отключающее тестовый режим;
8. Перезагружаем компьютер. В углу появится надпись “Тестовый режим Windows 7 Cборка 7600”;
9. Запускаем программу dseo13b.exe;
10. Добавляем цифровую подпись для драйвера Multikey. Для этого выбираем "Sign a System File" и вводим имя файла, включая полный путь C:\Windows\System32\Drivers\multikey.sys, тестовый режим не выключаем!!!
11. Перезагружаем компьютер;
12. Запускаем EPLAN Electric P8 2.0.5.4602 и наслаждаемся его работой


I personally tested this and it works 100%. Follow every step that's into the manual and it will work.

Top
 Profile  
 
PostPosted: Tue Jul 19, 2011 5:09 pm 

Joined: Wed Jul 13, 2011 6:38 pm
Posts: 17
:D
Thanks.Work fine.
My problem was with UAC.I solve and now work.
how can I repay?


Top
 Profile  
 
PostPosted: Sun Aug 07, 2011 11:02 am 

Joined: Mon Jul 18, 2011 7:06 pm
Posts: 13
http://www.ecae.co.kr/download/Electric_P8_2.0_SP1_2.0.9.4831.zip
http://www.ecae.co.kr/download/Trial_License_download.zip

This link is fast speed, But without license.
Please upload license.
Thank you. (tyou)


Last edited by shl235 on Sun Aug 07, 2011 11:16 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Aug 08, 2011 12:08 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 80
Location: Europe
the old one works fine with this version also :)


Top
 Profile  
 
PostPosted: Mon Aug 08, 2011 5:33 pm 

Joined: Fri Oct 08, 2010 12:15 pm
Posts: 535
Eplan Electric P8 2.0 SP1 4831 (32Bit/64Bit) | 1.25 GB
EPLAN Electric P8 is the ultimate flexible solution for global controls design engineering. It’s highly innovative and user friendly. In fact, EPLAN Electric P8 is so much more that to better describe what makes it different, superior and ahead of its time, perhaps we should mention what it’s not.
New dimensions in engineering
We have been developing engineering solutions for more than 20 years. As a subsidiary of Rittal within the Friedhelm Loh conglomerate, we are synonymous with continuous development, innovation, longevity and secure investment.
True to our motto "EPLAN your Engineering", we provide our customers with innovative solutions for an array of engineering disciplines and for industrial manufacturing, including professional services for customized solutions and integration of systems within your organisation. When used in conjunction with Autodesk in mechanical design, we become synonymous with global expertise in CAE and CAD.
A presence in over 50 countries across the globe ensure that a professional consultant service is close at hand. More than 18,000 customers of all sizes from a broad range of industries, are using our solutions every day – and are opening up new dimensions in engineering.
About EPLAN Electric P8
EPLAN Electric P8 is proven to help increase quality, reduce cost and bring products to market faster whenever and wherever electrical controls design is an important part of a business.
EPLAN Electric P8 is not a drafting package. With EPLAN Electric P8, you will eliminate, repetitive, unproductive, mundane and tedious manual work associated with traditional drafting packages. No more spending valuable time on wire numbering, device naming, cross referencing, checking for errors and creating bill of materials and wire lists. Instead, you’ll get to focus your full attention on design engineering to meet critical deadlines and fulfill high accuracy and quality expectations.
What's New in EPLAN Electric P8 2.0
Propelled by 25-plus years of solid experience, constant innovation and industry leadership in the electrical CAD/CAE field, EPLAN takes you to a new dimension in design automation where your ability to create, manage and document your controls hardware projects will reach new levels of efficiency, flexibility and global integration. You'll gain unprecedented productivity, quality and accuracy in the design of your electrical schematics and all associated reports, lists and forms.
Version 2.0, the much anticipated and the biggest upgrade since the unveiling of the EPLAN Platform in 2006 boasts over 1,000 new and improved features to make companies’ engineering even more efficient, more precise and more integrated.
Discover the next generation of EPLAN software - Here are just a few of the cutting edge capabilities you'll find in the new EPLAN Electric P8 v2.0.
EPLAN Pro Panel Add-on Module
With the EPLAN Pro Panel module users can now quickly and easily create drawings and production documentation of panel layouts with associated 3D views. Fully integrated into the EPLAN Platform, it offers greater control and flexibility to make optimum use of the available mounting space. The result is substantial quality, cost and efficiency gains in collaborative product development process
Net Based Wiring Add Module
The Net Based Wiring Module allows users to create schematics without having to pay special attention to the order in which the components are connected. They can simply add this information into the schematics later when the spatial arrangement of the components and their optimal wire routing is finalized
link
http://letitbit.net/download/84757.876c7c81c5cac9cb5142fad61521/EPLAN20.part3.rar.html
http://letitbit.net/download/49236.49f5724e5bd8d6335bfa8fcc36d5/EPLAN20.part5.rar.html
http://letitbit.net/download/03775.04660d0cf89aa452b3149857662f/EPLAN20.part1.rar.html
http://letitbit.net/download/11999.16a4f5f0e4bfd19308d7bb55c644/EPLAN20.part2.rar.html
http://letitbit.net/download/24690.2e520c5f2e4842e77feb5ea728df/EPLAN20.part4.rar.html


Top
 Profile  
 
PostPosted: Tue Aug 09, 2011 8:38 am 

Joined: Thu Nov 15, 2007 7:04 pm
Posts: 35
Location: Iran
plz rapid link
thnx (clap)


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 139 posts ]  Go to page Previous  1, 2, 3  Next

All times are UTC + 3 hours


Who is online

Users browsing this forum: pf15486, thanh3386 and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version