Atals copco Elektronikon 1900 0700 08 screen problem
Atals copco Elektronikon 1900 0700 08 screen problem
Hi
we have atals copco air compressor it is sceen Elektronikon 1900 0700 08 screen give alarm system failure 11 how to solve this alarm.
we have atals copco air compressor it is sceen Elektronikon 1900 0700 08 screen give alarm system failure 11 how to solve this alarm.
Re: Atals copco Elektronikon 1900 0700 08 screen problem
thank you very much aakodi but also I need to know the meaning of system failure -104 and if you have manual for this controller please share it.
Re: Atals copco Elektronikon 1900 0700 08 screen problem
Hi all,
we have a problem with an Atlas Copco compressor and it has ELEKTRONIKON PLC and on the display there is nothing but this number "100100000000".
Can someone help me please to understand what does this mean and how to resolve it.
Thanks
we have a problem with an Atlas Copco compressor and it has ELEKTRONIKON PLC and on the display there is nothing but this number "100100000000".
Can someone help me please to understand what does this mean and how to resolve it.
Thanks
Re: Atals copco Elektronikon 1900 0700 08 screen problem
No one is able to help me about this?
Re: Atals copco Elektronikon 1900 0700 08 screen problem
Morning all has anyone found a solution to the error code on the Elektronikon 100100000000.
I hav got this same error on our Compressor and am struggling to find a solution to the error.
Any help would be greatly appreciated.
I hav got this same error on our Compressor and am struggling to find a solution to the error.
Any help would be greatly appreciated.
Re: Atals copco Elektronikon 1900 0700 08 screen problem
Hello!
Error 200 occurred, it was reset, and the compressor started and started.
Then he stood for a while and when turned on, writes 110100000000 on the screen and does not respond to buttons.
Maybe new information appeared and someone solved this problem?
Error 200 occurred, it was reset, and the compressor started and started.
Then he stood for a while and when turned on, writes 110100000000 on the screen and does not respond to buttons.
Maybe new information appeared and someone solved this problem?
Re: Atals copco Elektronikon 1900 0700 08 screen problem
you need dump file for eprom and time keeper with correspond the serial number of comperessor,and nobody have software for doing it else atlas copco company.this software is special that all serial numbers of atlas comperessor can with reprogram by using it.
Re: Atals copco Elektronikon 1900 0700 08 screen problem
Hi
For system failure see the two link below:
http://comprforum.ru/viewtopic.php?f=28&t=954
https://www.automatenfreunde.de/downloa ... chluss.jpg
For system failure see the two link below:
http://comprforum.ru/viewtopic.php?f=28&t=954
https://www.automatenfreunde.de/downloa ... chluss.jpg