Citect 7.4, 2015, 2016 - Crack

[Peritior]

Hello!

Does anyone have a citect crack for any of the "newer" Citect servers?
I have been looking like crazy but all the download links are to old and not active :-/

Citect 7.2, 7.3 would work aswell but i whould prefere 7.4 and newer.

[Peritior]

Bump

[djalmaz]

Try these keys (the difference is only in the identifier of the system Vijeo-Citect). VijeoCitect 7.20, Citect 2016 works exactly on this key. By analogy 7.30, 7.40 will work too, the protection system did not change. Пробуй эти ключи (разница только в идентификаторе скада системы Vijeo - Citect). Точно работает на этом ключе VijeoCitect 7.20, Citect 2016. По аналогии 7.30, 7.40 тоже будут работать, система защиты не менялась.
https://ru.files.fm/u/2yfb9wy8

[Peritior]

Awesome! What more files do i need to make the installation?

Some Install.bat if i'm not mistaken? Do you know any downloadlink for that aswell?

[tatcontrol]

Thank you
would you please explaine how to install the crack

[djalmaz]

multikey for x64 platform, tested on win7 x64.
And then use the standard procedure for emulating the key:
1. Install .reg file (double click) which you need version
2. Run Install.cmd
3. Restart computer.
Check in ciusafe, should determine the key. Try it https://ru.files.fm/u/e9a6zgkw

[DinoB]

Hi, is this working? I tried on my Virtual machine but so far unsuccesfull.

PLease if someone have som solution tell me..

Regards

[DriverFirst]

не работает этот способ ни с 7.20, ни с 7.40

[Centoff]

Все работает, просто надо поработать над ним под win7-10 x64. Протестировал на win10 версия 7.4. Если надо, могу скинуть мой вариант.

[ttrunc]

Все работает, просто надо поработать над ним под win7-10 x64. Протестировал на win10 версия 7.4. Если надо, могу скинуть мой вариант.

скиньте пожалуйста

[ascii_192]

It is not working in Win10 currently. I have done a video for windows 7 64bit. It has also included crack:
https://mega.nz/#!AfIRESZC

[djalmaz]

не работает этот способ ни с 7.20, ни с 7.40

Мой ключ прекрасно работает с Citect2016, с Citect7.20 под Windows7 x32 и x64,проверено лично, разница в драйверах на multikey. Подбирайте под свою ОС и разрядность драйвер multikey.sys, должно нормально установиться в системе устройство SafeNet USB SuperPro/UltraPro. Собственно, дальнейший порядок установки указан выше. Файл .reg применяете под свою версию скада, соответственно, разница в идентификаторе Vijeo или Citect серии. Все Вот что пишет VijeoCitect7.20 с этим ключем
https://ibb.co/dgsVBH7

[Centoff]

Все работает, просто надо поработать над ним под win7-10 x64. Протестировал на win10 версия 7.4. Если надо, могу скинуть мой вариант.

скиньте пожалуйста

Извиняюсь за долгий ответ!

Держите!
Распаковать на диск C:\ (если путь будет отличаться от C:\ACA3\, то заменить его в install.cmd)
так же в архиве есть devcon10 и на x86 (автоматом на x64) и архив с мультикеем подписанным для win10 на x64 (уже стоит)
https://drive.google.com/open?id=1_XUq3 ... QsRFjU-Mxg

[Centoff]

Все работает, просто надо поработать над ним под win7-10 x64. Протестировал на win10 версия 7.4. Если надо, могу скинуть мой вариант.

скиньте пожалуйста

Извиняюсь за долгий ответ!

Держите!
Распаковать на диск C:\ (если путь будет отличаться от C:\ACA3\, то заменить его в install.cmd)
так же в архиве есть devcon10 и на x86 (автоматом на x64) и архив с мультикеем подписанным для win10 на x64 (уже стоит)
https://drive.google.com/open?id=1_XUq3 ... QsRFjU-Mxg

Пароль/Password: plcforum.uz.ua

Установка:
1) Установить сертификат ( у меня на любом сработал, последний на 800)
2) Запустить install.cmd (отредактировать, если путь отличается)

[mistymoon]

I've followed the instructions for W10 64bit. But I get this error:

C:\ACA3>C:\ACA3\devcon.exe remove root\multikey
No devices were removed.

C:\ACA3>C:\ACA3\devcon.exe install C:\ACA3\multikey.inf root\multikey
devcon.exe failed.
Press any key to continue . . .

[longwangwl456]

In win10 X64, Citect 2016 simulation key can be found by CiUSAFE.EXE from Citect V7.2 if we replace the file in Citect 2016. But that means nothing.If run "Example" project, it will go to demo mode.

Run the CiUSAFE.EXE from Citect 2016 will show "Error key".

Any comments?

Thanks.

[amazon1988]

1.Run as administrator need devcon.exe
2.Drivers subscribed to Multikey x64 needed.

[cool_runnin]

I am trying the above on fresh Citect 2018 installation (Virtual Machine + Win7 x64).
It works but now I am stuck with upgrading the emulated dongle and receiving the Authorization Code.
Any solutions to generate the key ?

[amazon1988]

I am trying the above on fresh Citect 2018 installation (Virtual Machine + Win7 x64).
It works but now I am stuck with upgrading the emulated dongle and receiving the Authorization Code.
Any solutions to generate the key ?

Citect 2018 has version 8.1x, in the header is a key for Citect 2016 8.0x

[cool_runnin]

I got the key. The key changes each time you run CIUSAFE and that indicates the multi-key emulator works OK.
But how to generate authorization code to that key ?
According to yt some guy goes to official site where you paste the key (starting with 047-, 048, ..) and then he gets long text. This is Authorization Code.
Also. The .reg files in above links for each version are the same so why not use them for x8.1 (Citect 2018) ?

[amazon1988]

I got the key. The key changes each time you run CIUSAFE and that indicates the multi-key emulator works OK.
But how to generate authorization code to that key ?
According to yt some guy goes to official site where you paste the key (starting with 047-, 048, ..) and then he gets long text. This is Authorization Code.
Also. The .reg files in above links for each version are the same so why not use them for x8.1 (Citect 2018) ?

This is how the key to version 8.1 should look

And the .reg file is different from the citect 2016 version (8.0)

[longwangwl456]

Hi cool running,

You run the CiUSAFE from citect 2016 or 2018 and find the right key just using the .reg file from above?

Very interesting. My test failed as CiUSAFE from citect 2016 cannot find any key based on the .reg file here.

My system is Win 7 64 bits.

Could you share your .reg file and your CiUSAFE.exe file to me?

Thanks.

[cool_runnin]

Hi longwangwl456:

You 've got all needed files in above replies.

1) Run devcom.exe as Administrator
2) Double click appropriate .reg file
3) Install multikey file
4) Reboot windows 7. You will be notified that the driver is not digitally signed (warning) but still reboot the system.
In windows 7 during rebooting keep pressing F8. This will take to you Advanced Boot Options menu. There, select the last option (Disable Driver Signature Enforcement).
Only then you will see in CIUSAFE.exe that you got your Citect registered.

So each time you start system you need to remember about F8 and you are all set.

amazon1988:
Maybe you share with us how on earth have you created .reg file for Citect SCADA 2018 ?

[longwangwl456]

Thanks cool.

Still not working to me.

Here is my test result.

If I use CiUSAFE.exe from V7.2 then showing key found, good. That verified the multikey working properly. No diver signature problem.

If I use the original CiUSAFE.exe from Citect 2016 itself, then showing Error key, nothing found.

File size of CiUSAFE.exe from Citect 2016 is about 3M while the one from V7.2 only 1M. Therefore I think the problem may from CiUSAFE.exe itself. That's why I 'd like to have your CiUSAFE.exe to test in my system.

Thanks!

[longwangwl456]

Or I can send you my Citect 2016 CiUSAFE.exe to test in your system.

[ascii_192]

here is crack with video instruction:
https://mega.nz/#!AfIRESZC!vcYwVKNYSGGj ... V6IkSyCZEw

[longwangwl456]

Thanks ascii_192.

Unfortunately still not working for me.

MultiKey running properly as running CiUSAFE.exe from V7.2 can show "key found" but no use for Citect 2016.

Size of CiUSAFE.exe in Citect 2016 is 3130kb while in Citect V7.2 only about 1015kb.

Not sure where is the problem.

[longwangwl456]

Update!

Redo everything on a new "clear" Win7 VM and finally it is working!

Thanks everyone.

[bobahatop]

Does it work for 2018?

[longwangwl456]

Don’t know. Have not tried 2018 yet.

[mezippy]

Hi All,

This threat has been excellent.

Thanks .

[scitect]

There are keys to all versions of Citect Scada. For all questions write to the mail. We will agree.