Здравствуйте!
Подскажите как в Степ 7 в ДБшке затянуть Актуальные значения (Actual Value) в Инициализационные (Initial Value)?
Заранее спасибо.
Step 7 V 5.5 Copy DB
Re: Step 7 V 5.5 Copy DB
Open DB file => Go to View => Switch from Data View to Declaration View => Place your data in Initial Value field => Save.
All DB editing goes in "Declaration View"
All DB editing goes in "Declaration View"
Re: Step 7 V 5.5 Copy DB
Спасибо за ответ.
Таким образом можно изменять только по одному значению
Хотелось бы скопировать и вставить сразу все значения из DB.
Таким образом можно изменять только по одному значению
Хотелось бы скопировать и вставить сразу все значения из DB.
Re: Step 7 V 5.5 Copy DB
By hand only
Lots of time DB is type of UDT. It means you will need to edit UDT, which is not a good approach.
Lots of time DB is type of UDT. It means you will need to edit UDT, which is not a good approach.
Re: Step 7 V 5.5 Copy DB
Hello!
More easy is to create a Source form the DB and to edit/,modify as you wish in the source code stl.
Best regards!
More easy is to create a Source form the DB and to edit/,modify as you wish in the source code stl.
Best regards!
Re: Step 7 V 5.5 Copy DB
What is easier? Also need handles to work.