[?]: About keys for WinCC

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

[?]: About keys for WinCC

Post by CoMod » Wed Sep 09, 2009 3:27 am

video how use keys


https://www.youtube.com/watch?v=SpR165EPMBY


Image
read CHM or PDF help file

Simatic EKB Install 2018 viewtopic.php?f=30&t=218
Simatic EKB Install 2018 http://rutracker.org/forum/viewtopic.php?t=5572061

Image
Прежде чем пенять голословно на кого то потрудитесь сделать копии экранов с сообщением об ошибке, копию экрана АЛМ с установленными ключами, текст файла отчёта... ну то есть всё то, что представлено ниже с картинками... и читайте прилагаемую в поставке Справку в формате CHM.

[LINK]: Wincc 7.2 ASIA usb unDongle crack
viewtopic.php?f=36&t=20592&hilit=dongle
https://mega.co.nz/#!iN9C3D5C!U_Zy6xDsG ... MhBQ7cBMKs

Minimal keyset for Runtime (example for v7.0)
Image

van8x10 wrote:The newest EKB_Install_2009_08_26 doesn't have?!

go to viewtopic.php?t=10212

For WinCC ASIA required special USB WinCC ASIA dongle and the dongle is to be connected always with our PC to make use of the ASIA softwares.
Image

WinCC v7.4/v7.3 archive tags
For WinCC v7.4 archive tags use keys from v6.2 (h) SIFCY9WTGX06023.EKB
используйте архивные ключи версии 6.2 (h)
Image

:anon: show file C:\Program Files (x86)\SIEMENS\WINCC\diagnose\LicenseLog.xml
Image


TIA Portal WinCC

viewtopic.php?f=30&t=218
ekb for TIA Portal
Show
Image


tested ekb for TIA Portal WinCC pro
ekb for TIA Portal WinCC pro
Show
Image
Last edited by CoMod on Wed Sep 09, 2009 9:20 am, edited 1 time in total.

van8x10
Posts: 88
Joined: Thu Sep 06, 2007 10:58 am
Location: Vietnam

Post by van8x10 » Wed Sep 09, 2009 8:48 am

Thank CoMod!
New problem: How to get max External Tags, see image below:

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Post by CoMod » Wed Sep 09, 2009 9:17 am

Delete key with 128 tags :lol:
See EKB_Install Help>English>Problems>WinCC Demo mode
You need install ONLY 1 RC key.
In this time only low 128 Tags key is worked - others keys is banned !!!
Image
========== Archive with more 512 tags ====
http://www.plcforum.uz.ua/viewtopic.php ... it=archive
korceguitar wrote:i try your way but it didn't accept again.
i attached 2 pictures of problem.
if i press runtime button, first picture opens.
Then i press details button, second picture opens.
...
Simple example with 513 archives tags - fot testing Runtime.
http://rapidshare.com/files/213107912/T ... 512Atg.rar

Blank screen but with big tag table.
Image

without SIFCYWTG* show
Image
or
Image

with SIFCYWTG06* work without problems (WinCC v6.2 and v7.0)
C:\Program Files\Siemens\WinCC\Diagnose\License.Log

Code: Select all

03/25/2009 00:00:26 InitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | NameForMessageBox =  | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | Relevant Limit = 0000065536 | 
03/25/2009 00:00:26 InitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | NameForMessageBox =  | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | Relevant Limit = 0000065536 | 
03/25/2009 00:00:35 InitLicense ED | AppName = AppEd:TlgCS | CycleCheck = own | NameForMessageBox =  | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | Relevant Limit = 0000065536 | 
03/25/2009 00:00:36 InitLicense CS | AppName = AppCS:TlgEd | CycleCheck = yes | NameForMessageBox =  | Name of License = SIFCY9WTGX06021 | Text of License = WINCC Arch (1500) | Relevant Limit = 0000001500 | 
03/25/2009 00:01:00 ExitLicense ED | AppName = AppEd:TlgCS | CycleCheck = own | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | 
03/25/2009 00:01:00 ExitLicense CS | AppName = AppCS:TlgEd | CycleCheck = yes | Name of License = SIFCY9WTGX06021 | Text of License = WINCC Arch (1500) | 
03/25/2009 00:01:07 InitLicense RT | AppName = AppRT:Mcp | CycleCheck = yes | NameForMessageBox =  | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | Relevant Limit = 0000065536 | 
03/25/2009 00:01:07 InitLicense RT | AppName = AppRT:Mcp_Server | CycleCheck = yes | NameForMessageBox =  | Name of License = SIFLA9WSEC0700 | Text of License = WinCC Server | 
03/25/2009 00:01:08 InitLicense RT | AppName = AppRT:TlgASO | CycleCheck = yes | NameForMessageBox =  | Name of License = [b]SIFCY9WTGX06021 [/b]| Text of License = [b]WINCC Arch (1500)[/b] | [color=#0000FF]Relevant Limit = 0000001500[/color] | 
03/25/2009 00:02:42 ExitLicense RT | AppName = AppRT:Mcp | CycleCheck = yes | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | 
03/25/2009 00:02:42 ExitLicense RT | AppName = AppRT:Mcp_Server | CycleCheck = yes | Name of License = SIFLA9WSEC0700 | Text of License = WinCC Server | 
03/25/2009 00:02:42 ExitLicense RT | AppName = AppRT:TlgASO | CycleCheck = yes | Name of License = SIFCY9WTGX06021 | Text of License = WINCC Arch (1500) | 
03/25/2009 00:02:46 ExitLicense CS | AppName = AppCS:Mcp | CycleCheck = yes | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | 
03/25/2009 00:02:46 ExitLicense ED | AppName = AppEd:Mcp | CycleCheck = own | Name of License = SIFLA9WRC40700 | Text of License = WinCC RC (65536) | 
Send me:
1. your example (with more 512 archives tags) - Rapidshare link or e-mail
2. Authoinformation.inf
3. ScreenCopy of ALM with installed keys
Russian wrote:Простой пример с 513 архивными тэгами.
Чистый проект с набитой таблицей тэгов.
Без ключа SIFCY9WTGX* вылазит сообщение о превышении 512 тэгов.
Сообщения именно такие.
Поэтому мне непонятно приведённое некоторыми интуристами сообщение об A9WTG.

С установленным SIFCY9WTGX* ничего не вылазит.
Естественно первым делом надо поменять имя компьютера в проекте на имя своего компьютера.

mazdak
Posts: 19
Joined: Tue Dec 29, 2009 7:54 am

Re: [?]: About keys for WinCC

Post by mazdak » Wed Dec 30, 2009 12:52 pm

Hello all
I have a license problem with WinCC V.7. I've Installed all of EKB_2009_08_26 keys.
But pushing "Activate Button" during 45% of activation progress (pic2), a license error occurres, reporting a Runtime license is required according to attached pics1.
When I press "Detail Button", the window appears like pic3.
And finally the picture I've created by Graphical Design is monitored as attached pic4 !
What's the problem?! :(

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Wed Dec 30, 2009 1:17 pm

mazdak wrote:When I press "Detail Button", the window appears like pic3
You need to remove all trial licenses
See Help and FAQ
http://support.automation.siemens.com/W ... n/24200966

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Wed Apr 06, 2011 4:05 pm

I've installed WinCC V7.0 SP2 and use the EKB 2010_09_09 for all the recomended WinCC items, but it doesn't work. You may see in the following picture, the lisence is still DEMO.

Anything I missed? Can you help me?

Image Image Image

Here is the License.log content:
04/06/2011 16:05:44 InitLicense xx | AppName = ConnectivityPack | CycleCheck = no | NameForMessageBox = | Name of License = A9WOP10700 | Text of License = |
04/06/2011 16:05:46 InitLicense xx | AppName = DataMonitor | CycleCheck = no | NameForMessageBox = | Name of License = A9WVC?0700 | Text of License = |
04/06/2011 13:50:05 NoLicense CS | Name of License = A9WRC?0700 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No |
.....
delete all short keys
and SIFLA9WRT?0700 WinCC RT

install
SIFLA9WRC?0700
SIFLA9WVC?0700
Thanks a lot!
It works now

Info
Faq & Info
Faq & Info
Posts: 397
Joined: Wed Oct 05, 2005 9:00 am

Re: [?]: About keys for WinCC

Post by Info » Mon Jun 13, 2011 8:53 am

Joke - Password from developer.
For any password C-script WinCC.
Work for ANY version WinCC.

APBODIUR

It is easy and simple. Without any cracks
http://www.sps-forum.de/archive/index.php/t-6371.html
Gruss Ligatschow, 19.01.2006 wrote:Master-Passwort für WinCC-Skripte. WinCC V5, V6
Ein durch ein Passwort geschütztes Skript von WinCC kann durch folgendes Passwort geöffnet werden.

APBODIUR


Gruss Ligatschow

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Mon Jun 13, 2011 9:20 am

bhole1 wrote:Unfortunately I do not work. Is someone we may be able to upload to rapidshare its funkcny AX NF ZZ in the zip file?
is still a problem with WinCC Demo License respectively. number of tags is nieaky plan to fix?
Provide details about your problem
Put pictures

bhole1
Posts: 9
Joined: Tue Sep 21, 2010 7:18 am

Re: [?]: About keys for WinCC

Post by bhole1 » Mon Jun 13, 2011 12:39 pm

I have WinCC 7th
With the C: directory by deleting AX NF ZZ turn on EKB Install
Version 2011_05_22 tick Required and recommended long keys install ok.
Zapmen WinCC. Create multi project and it's ok. Externa license tag 0 153600 but I do not understand this. Maybe just restart was enough masi or create a new project. Anyway Thanks for your time.
:?

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Mon Jun 13, 2011 1:38 pm

See upper posts.
Show me your Log
C:\Program Files\Siemens\WinCC\Diagnose\License.Log

krneki
Posts: 21
Joined: Fri Jun 24, 2011 8:56 am

Re: [?]: About keys for WinCC

Post by krneki » Tue Aug 21, 2012 3:32 pm

Dear PLCforum users,

I urgently need your help with licensing WinCC V7.0 + SP3+ Upd2. I couldn't find EKB_install in torrent folder, so I used older one which came with Step 7 (Simatic_EKB_Install_2011_05_22). That didn't work either so I tried the newest one I could find (Simatic_EKB_Install_2012_07_29). Again without success.

Here is what I've tried so far: install short keys, install long keys, FastCopy key and install all keys, but none of them work. I also tried to delete keys with AuthorsW, but I have no idea how.
WinCC just keeps reporting DEMO mode.

Here are all screenshots:
Image Image Image Image

And license logs:
http://pastehtml.com/view/c8yceh8x5.rtxt
http://pastehtml.com/view/c8ycjwaix.rtxt

I'm a student and I really need to work on some project ASAP, so your help would be much appreciated.

=======================================================
Now I deleted AX NF ZZ and installed only one license with EKB install:
Image.

But it still doesn't work. This is what I get when I open up WinCC:
Image

Please help.

DiVan
Site Admin
Posts: 127
Joined: Mon Aug 15, 2011 2:27 pm

Re: [?]: About keys for WinCC

Post by DiVan » Tue Aug 21, 2012 4:01 pm

Not use Short keys for new program - delete it.
Select Recommended
and Press "Install LONG KEY" button

Image


Image

krneki
Posts: 21
Joined: Fri Jun 24, 2011 8:56 am

Re: [?]: About keys for WinCC

Post by krneki » Tue Aug 21, 2012 5:31 pm

So under menu "Required keys" with enabled "Recommended" option I should only install long key for the one you marked up? What about other keys, such as "WINCC Interf. 505", "WINCC-V7 RT", "WINCC advanced process control", etc.? Because if you check out my Automation License Manager I posted above, there are still many unlicensed programs.

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Tue Aug 21, 2012 6:43 pm

F1 :?:
Image

krneki
Posts: 21
Joined: Fri Jun 24, 2011 8:56 am

Re: [?]: About keys for WinCC

Post by krneki » Tue Aug 21, 2012 9:47 pm

thanks, let me double check if I got it right.
I shouldn't install keys from "Required" but instead I should select everything under "Yellow Disk keyset" -> "WinCC" -> "WinCC v7.0 (2008) basis" and install all long keys?
As far as I see, there is only one RC file here so that should be it? :?

krneki
Posts: 21
Joined: Fri Jun 24, 2011 8:56 am

Re: [?]: About keys for WinCC

Post by krneki » Wed Aug 22, 2012 11:52 am

So I did that and also installed everything what was left in Required, except licenses.
Automation License Manager says that everything is licensed now.
WinCC also says Licensed, but nothing about how many of them.
Is that ok?

This is how EKB looks ATM:
Image

Is that the proper license?

DiVan
Site Admin
Posts: 127
Joined: Mon Aug 15, 2011 2:27 pm

Re: [?]: About keys for WinCC

Post by DiVan » Wed Aug 22, 2012 12:02 pm

RT license for Run project on a Client
RC license for Configure and Run project
(sfaq)
http://support.automation.siemens.com/D ... n/11997978
http://support.automation.siemens.com/D ... n/19246510

krneki
Posts: 21
Joined: Fri Jun 24, 2011 8:56 am

Re: [?]: About keys for WinCC

Post by krneki » Wed Aug 22, 2012 12:17 pm

So I can't use both at once?
Then I have very hard time with choosing as I'm complete newbie here and I really have no idea which one is the proper one for me.
I just need license, which will allow me to create several tags (under SIMATIC S7 protocol suite -> MPI) which I can use later in Graphics Designer.
PC is connected to SIMATIC S7-400 through MPI/DP PC Adapter.

YeuPLC
Posts: 4
Joined: Fri Jul 29, 2011 10:28 am

Re: [?]: About keys for WinCC

Post by YeuPLC » Wed Apr 10, 2013 7:17 am

Hi expert ! (oo) (oo)
I have key 64k Key and winCC 6.0 sp1 registered. But but every time you start up, WinCC reminders were missing key as below:
WinCC version
Show
Image
Used Tags
Show
Image
Missing Key
Show
Image
File Authorinformation on My Computer attachments:
http://www.mediafire.com/?h01zzj2x248bzws

please help me! thank you.

Janac
Posts: 7
Joined: Thu Nov 25, 2010 9:20 am

Re: [?]: About keys for WinCC

Post by Janac » Tue May 07, 2013 11:29 am

like it says in the window, you have more than 512 trends, and for that you need aditional Archive licence.

MifPT
Posts: 7
Joined: Wed Jun 08, 2011 7:41 pm

Re: [?]: About keys for WinCC

Post by MifPT » Thu Oct 17, 2013 4:10 pm

Guys,

Just one thing:

DON'T FORGET TO REBOOT !!!!*

Otherwise it won't work. (h)

MifPT

*Or check installed key in ALM

rainymetal
Posts: 1
Joined: Sun Feb 23, 2014 7:32 am

Re: [?]: About keys for WinCC

Post by rainymetal » Sun Feb 23, 2014 7:41 am

hi friends
I'm new and I don't know here is a good place for my question or not
How I can cracked WinCC_7.0_SP3_EUROPE with EKB, and which EKb is good for WinCC_7.0_SP3_EUROPE ?

YeuPLC
Posts: 4
Joined: Fri Jul 29, 2011 10:28 am

Re: [?]: About keys for WinCC

Post by YeuPLC » Thu May 08, 2014 5:15 am

Hi Expert !
I have Project for Wincc 6.2 with 2474 Tag and 526 Tag Logging , My OS this is : Windows Server 2003 Standar SP2.
I have use EKB 2013 to Register for WinCC 6.2 with key Following:

Code: Select all

SIFLA9WRT40602	 WINCC-V6 RT 64K PTg 512 ATg	v6.2
SIFLA9WRC40602	 WINCC-V6 RC 64K PTg 512 ATg	v6.2
SIFCY9WTGX06021	 WINCC-V6 Arch 1500 ATg	v6.2
such as, wincc the report successfully! and Full lisence. But after a time interval as 5-7 day , WinCC will appears nag Demo. I try clean all key in my computer and Restart My computer.
I am continued Register with three key above and WinCC wincc the report successfully. But after a time interval above, WinCC still appears nag demo.

Hic, I am very sad (h) . I hope someone can help me.
Thank alot (oo)

CMG_KECH
Posts: 3
Joined: Wed May 14, 2014 2:35 pm

Re: [?]: About keys for WinCC

Post by CMG_KECH » Wed May 14, 2014 7:02 pm

Hi everyone, I just start using the wincc V7. I made all the graphics designer but when I wanted to put the tags I get a message saying that my license doesn't give the right to create any tag!!! ( External tags: 0 / License : 0 )
I tried the license in the EKB 2008 and EKB 2013 without any result!! What should I do pleaaaase help me (s

CMG_KECH
Posts: 3
Joined: Wed May 14, 2014 2:35 pm

Re: [?]: About keys for WinCC

Post by CMG_KECH » Tue May 20, 2014 12:21 pm

YeuPLC wrote:
CMG_KECH wrote:Hi everyone, I just start using the wincc V7. I made all the graphics designer but when I wanted to put the tags I get a message saying that my license doesn't give the right to create any tag!!! ( External tags: 0 / License : 0 )
I tried the license in the EKB 2008 and EKB 2013 without any result!! What should I do pleaaaase help me (s
(wow)
Please post image about your wincc and a message saying that my license doesn't give the right to create any tag!!
here's the image

Image

thank you

YeuPLC
Posts: 4
Joined: Fri Jul 29, 2011 10:28 am

Re: [?]: About keys for WinCC

Post by YeuPLC » Thu May 22, 2014 7:34 am

Ok, Now You use Windows Explore to search with keyword : *.EKB and delete all. Note : Checked : Show hidden Files and Folders .
Then you to use EKB 2013 to Install with key long following :

Code: Select all

SIFLA9WRC40700	 WINCC-V7 RC 64K PTg 512 ATg	v7.0
SIFCY9WTGX06026	 WINCC-V6 Arch 80000 ATg	v6.2
SIFLA9WARC0700	 WINCC User Archives	v7.0
Next, restart your computer! and your WinCC has been registered with 64k
I using WinCC 7.0 + SP2:
Image
Image
Good Luck! (rr)

Info
Faq & Info
Faq & Info
Posts: 397
Joined: Wed Oct 05, 2005 9:00 am

Re: [?]: About keys for WinCC

Post by Info » Wed Jun 04, 2014 12:30 pm

maufus wrote:Don't know if it's OT...

WINCC V12 (TIA PORTAL)

I installed WINCC ADVANCED V12 but with Simatic_EKB_Install_2013_03_08 and Simatic_EKB_Install_2013_12_25 the key is missing.

Any suggestion ?
EKB installer 2014.03.08
viewtopic.php?f=30&p=66475#p66475

Image

CMG_KECH
Posts: 3
Joined: Wed May 14, 2014 2:35 pm

Re: [?]: About keys for WinCC

Post by CMG_KECH » Mon Jun 09, 2014 5:24 pm

Hi again, after 3 weeks of resolving the probleme of external tags I have a new problem with my WinCC V7 it turns into Demo mode (again) and it shows this message :

Image

Pleaaaase help I'm a student and I really need to work on this (sos)

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Thu Sep 11, 2014 4:26 pm

ONLY http://plcforum.uz.ua PLACE ORIGINAL LINK TO THIS SOFT
WITHOUT BACKDOOR
Our project is not a commercial
we do not earn money on the links
Romanians doing business on relinking our (your) links
and now the forges "holy" - beware of backdoor and viruses in them re-issued

Image

наш проект не коммерческий
мы не зарабатываем деньги на ссылках
поэтому если уж качаете, то качайте из проверенного временем первоисточника
румын делает бизнес на перелинковке наших(ваших) ссылок
а теперь ещё и подделывает "святое" - опасайтесь чёрных ходов и вирусов в перевыпущеном им

Segment
Posts: 5
Joined: Thu Aug 25, 2011 11:07 am

Re: [?]: About keys for WinCC

Post by Segment » Wed Oct 15, 2014 9:14 am

Segment wrote:WinCC keys error
Запускаю CAS (PCS7 v8 SP2). При старте WinCC, а также при запуске рантайма валит демо-режим.
Image

Что ему еще надо? Я уже и флешку ему засовывал с ключами, а ему неймется. Что я делаю не так? (sos)
Info wrote:Для WinCC 7.* используй длинные ключи
For WinCC 7.* use long keys
Image

и иди в существующую тему
and GoTo [?]: About keys for WinCC
viewtopic.php?f=4&t=11415
Оставил только длинные ключи. Короткие уничтожил. Результат аналогичный. Что же делать?
Image

DiVan
Site Admin
Posts: 127
Joined: Mon Aug 15, 2011 2:27 pm

Re: [?]: About keys for WinCC

Post by DiVan » Wed Oct 15, 2014 10:22 am

Донгл раньше просила только Азиатская версия
нужны файлы отчётов *.LOG как выше
копию экрана ALM с установленными и проверенными ключами

Для вступления изменений с ключами в силу требуется вновь проверить все в АЛМ и, иногда, перезапустить WinCC/приложение Сименса.

For the changes with the keys in the force required to re-check all keys in ALM and sometimes restart the WinCC / app Siemens.
Dongle earlier requested the Asian version only
Need report files * .LOG as above
a snapshot of ALM with established and proven keys
.........
04/06/2011 13:50:05 NoLicense CS | Name of License = A9WRC?0700 | Text of License = Simatic WinCC RC (Runtime + Development) | Exists = No |
....

Segment
Posts: 5
Joined: Thu Aug 25, 2011 11:07 am

[+?]: About keys for WinCC

Post by Segment » Wed Oct 15, 2014 11:03 am

DiVan wrote:Донгл раньше просила только Азиатская версия
Dongle earlier requested the Asian version only
The problem was really in that after the opening of the WinCC project defined it as an Asian because that somehow (probably after conversion) in the text library was Chinese.
Removed Chinese and became normal.

Спасибо за наводку!
Проблема была действительно в том что после открытия проекта WinCC определял его как азиатский из-за того что каким-то образом (видимо после конвертации) в текстовых библиотеках затесался китайский язык. Все удалил и стало норм.

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Thu May 28, 2015 7:34 am

Leemoooo4all wrote:hey experts, i want to delet all license in my client , i use ALM put when i delet any one it say u cant because it is active , i close all siemense program put also give me same message , some one tell me delet folder AX NF ZZ , i show all hidden folder put i dont found it , pls tell me how can i delet the license
1. ALM not delete keys (rr)
2. delete all license in your client is very bad idea (warn)
3. View hidden files
https://support.industry.siemens.com/cs ... 0&lc=en-WW
Image

Leemoooo4all
Posts: 3
Joined: Mon Apr 13, 2015 10:36 am

Re: [?]: About keys for WinCC

Post by Leemoooo4all » Thu May 28, 2015 3:43 pm

actually
i used Simatic_ekb false, more than 2000 keys in c ,d and e .
i want to delet what is exist in d , e . put AX NF ZZ not exist and not hidden .
i make view for hidden folder put not exist , in another PC i found it so how can i find this

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Thu May 28, 2015 3:51 pm

Try Shareware Total Commander http://www.ghisler.com/
for view Hidden System folders
Image

Screen copy ?

Link
Forum Community
Forum Community
Posts: 1082
Joined: Fri Oct 20, 2006 9:29 pm
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Contact:

Re: [?]: About keys for WinCC

Post by Link » Sat Jul 16, 2016 7:02 pm

Sim_EKB_Install_2016_07_16.exe https://mega.nz/#F!DsNy1DqR!p751JvORlgTeWsGSiTuWLQ
MD5: e190b1c240fe0908c2fc6085bbec413c
Image

smb
Posts: 65
Joined: Sat Feb 17, 2007 6:40 am
Location: Iran

Re: [?]: About keys for WinCC

Post by smb » Mon Jan 16, 2017 11:47 am

In Sim_EKB_2016_12_05 I didn't find any key for WinCC RC V7.3 2048 tags.I only find 1024 tags .when I install it.I use only 1024 tags not 2048 tags.As I know WinCC v7.3 doesn't have any version for 1024 tags.How can I solve it?

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Mon Jan 16, 2017 4:34 pm

use 64K or 256K :)

Mangyst
Posts: 19
Joined: Sun Mar 05, 2017 12:00 pm

Re: [?]: About keys for WinCC

Post by Mangyst » Sun Mar 05, 2017 12:35 pm

Привет всем ! Я работаю в обслуживании поэтому в проектировании полный нуб.Помогите пожалуйста!! (nuser)
У нас установлена WinCC 7.0. После аварийного отключениия начал жаловаться на лицензии.
В АЛМ несколько лецензий (DataMonitor(3), WebNawigator(3),Indastrrial Ethernet Softnet-S7 Basic) слетели.
https://cloud.mail.ru/public/A3Ym/Ba949YTfJ
Переустановил их.после этого всё активировалось.
https://cloud.mail.ru/public/AWR6/3GP5jv4RR
но при запуске рантайм вылазиет сообщение о превышении числа архивных тегов.
https://cloud.mail.ru/public/DEX5/hUtP8j9Le
Как я понимаю во всех лицензиях стандарно 512 архивных тегов.для увеличения их количества устанавливается WinCC Archive. у меня установлен WinCC User Archive и активирован.
https://cloud.mail.ru/public/HUMx/vg8jqFVJi
(sos) (sos) В чём беда подскажите пожалуйста (h) (h) (h) (sos) (sos)
Всем кто откликнится плюс 500 к карме.

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Sun Mar 05, 2017 1:33 pm

Детская болезнь левизны - не надо устанавливать все халявные ключи (boom)
Посмотри картинки выше - лишние ключи удали вручную, для архивных тэгов нужен один дополнительный ключ на требуемое количество тэгов - см. сообщение Sep 09, 2009 12:17

Mangyst
Posts: 19
Joined: Sun Mar 05, 2017 12:00 pm

Re: [?]: About keys for WinCC

Post by Mangyst » Sun Mar 05, 2017 2:14 pm

Т.е. нужно просто установить ещё один ключ SIFCY9WTGX? .
а не ипользуемые ключи лицензий удалить

а wincc archives зачем тогда нужен?
(oo)

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Sun Mar 05, 2017 2:26 pm

Инсталлируйте только один ключ с нужным количеством tags.

nurik2293
Posts: 1
Joined: Mon Feb 27, 2017 3:03 pm

Re: [?]: About keys for WinCC

Post by nurik2293 » Mon May 15, 2017 8:17 am

Здравствуйте. Как установить WinCC 7.4 правильно?
Я установил WinCC 7.4 на Windows 7 максимальная на русском языке, установил все ключи через екб, но все равно просит ключ A9WRC simatic wincc usb dongle license missing Configuration. Можете показать порядок установки WinCC 7.4

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Mon May 15, 2017 11:04 am

nurik2293 wrote:Здравствуйте. Как установить WinCC 7.4 правильно?
Я установил WinCC 7.4 на Windows 7 максимальная на русском языке, установил все ключи через екб, но все равно просит ключ A9WRC simatic wincc usb dongle license missing Configuration. Можете показать порядок установки WinCC 7.4
See upper posts. / Смотри первое сообщение темы
Show me your Log / Покажи свои отчёты
C:\Program Files\Siemens\WinCC\Diagnose\License.Log

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Tue Oct 24, 2017 7:09 am

After editing project in other PC show Error message about missing PO licence wrote:Здравствуйте. Подскажите пожалуйста:
Я взял проект WINCC с рабочей станции и отредактировал его на другой машине.
Потом вернул отредактированный проект на рабочую станцию и при запуске получаю ошибку об отсутствии лицензии.
User Arhive не включал.
Есть подозрение что изначально проект был создан в wincc 7.0 sp2, а я его редактировал в wincc 7.0 sp3, это может быть проблемой?

Вот содержимое файла Licenze.log:
10/23/2017 20:03:30 Control Center - Demo Mode Runtime enabled -
10/23/2017 20:03:30 NoLicense RT | Name of License = A9WRP?0700 | Text of License = Simatic WinCC RT PO (Runtime) | Exists = No |
10/23/2017 20:03:30 InitLicense RT | AppName = AppRT:Mcp | CycleCheck = yes | NameForMessageBox = | Name of License = A9WRP?0700 | Text of License = Simatic WinCC RT PO (Runtime) |
10/23/2017 20:03:30 Control Center - Demo Mode Runtime enabled -
10/23/2017 20:03:30 NoLicense RT | Name of License = A9WTG69999 | Text of License = Simatic WinCC TagLogging (Runtime + Development) | Exists = No |
10/23/2017 20:03:30 InitLicense RT | AppName = AppRT:TlgASO | CycleCheck = yes | NameForMessageBox = | Name of License = A9WTG69999 | Text of License = Simatic WinCC TagLogging (Runtime + Development) |
10/23/2017 21:03:30 Control Center - Demo Mode Runtime expired -
и скриншот ошибки
Image
скриншот ключей
Image
https://support.industry.siemens.com/tf ... ageSize=10
Reorganization idea for Fix problem wrote:Hello to all,

I got a tip from my colleagues. For all who have this problem it may be helpful to solve it:

If you get an error License message relating to WinCC PO and you are alreadylicensed for WinCC RC or RT, it is because the project was originally created as part of a PCS7 TIA project.

You can use the PCS7 WinCC portion of the project as a standalone WinCC SCADA project, but a License error for POs(Process Objects or tags in the WinCC world) occurs by default. The clear this error you can do two things:

Run the "Save As..." option in Step7 with ReOrganization Slow enabled. This will clear the error inmost cases.
You can also run the Project Duplicator for WinCC (especially since you may not have Step7 in some cases) and use the "Save As" button to save the project to My Documents for example.

In either case, you can "fix" the License errors related to the PCS7 PO (Process Objects) that may appear while Activating or in WinCC Runtime.
We have an ES with with WinCC7.0 RC 64k license and 2 standalone OS with WinCC 7.0 RT license.
WinCC-comfiguration is an upgradet version, and now integrated with a Step7-Multiproject from an older ES with some PCS7 software.

OS are asking for PO-license!

The "Save As..." (with reorganisation Slow) option generated three error message related to missing
PO-licenses, so the "Save As.."-option vas aborted.

Since reorganization was an issue, I tried Reorganization function in Simatic Manager:

1. Close projects and exit in WinCC Explorer
2. Close open projects in Simatic Manager,
3. Simatic Manager: File-->Reorganize-->select project"XX"-->OK

Now WinCC Explorer shows correct license information.
See attached pdf-file

Thanks again for the reorganization idea
В случае возникновения подобной проблемы попробуйте реорганизовать проект и, в случае комплексного проекта, чтобы в свойствах проекта в Симатик Менеджере он не был задан как ПЦС7.

Junkok
Posts: 13
Joined: Thu Dec 29, 2016 7:10 am

Re: [?]: About keys for WinCC

Post by Junkok » Tue Oct 24, 2017 1:42 pm

Всё заработало, оказывается требовался ключ WINCC RT PO
Image
Подскажите можно ли проект который изначально был создал в wincc7 sp2, а потом отредактирован и сохранен в wincc7 sp3 вернуть обратно к формату wincc7 sp2 ?

mike1471
Posts: 1
Joined: Fri Feb 16, 2018 8:33 am

Re: [?]: About keys for WinCC

Post by mike1471 » Fri Feb 16, 2018 9:05 am

Dear all,

I'm looking for WinCC V7.4 SP1 RT key (65k tags)
In EKB, behind WinCC/WinCC V7.4/WinCC 7.4 RT, there is only PCS7 tags, isn't it?

Thanks

CoMod
Site Admin
Posts: 3447
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: About keys for WinCC

Post by CoMod » Fri Feb 16, 2018 1:21 pm

mike1471 wrote:I'm looking for WinCC V7.4 SP1 RT key (65k tags)
In EKB, behind WinCC/WinCC V7.4/WinCC 7.4 RT, there is only PCS7 tags, isn't it?
See upper posts. / Смотри первое сообщение темы
Show me your Log / Покажи свои отчёты
C:\Program Files\Siemens\WinCC\Diagnose\License.Log

a_gricaj
Posts: 181
Joined: Wed Mar 19, 2008 1:12 pm
Location: Ukraine

Re: [?]: About keys for WinCC

Post by a_gricaj » Tue Feb 20, 2018 8:46 pm

CoMod wrote:
a_gricaj wrote:здравствуйте, подскажите пожалуйста где скачать ключик к WinCC Logging for RT Advanced v14, перекачал уже половину крякалок и не могу его там найти(
Search button
Image
(thnx) (suc)
Очень благодарен)

Ramzai
Posts: 1
Joined: Fri Mar 16, 2018 8:02 pm

Re: [?]: About keys for WinCC

Post by Ramzai » Sat Mar 17, 2018 4:39 am

Hi all I have a problem with Wincc 7.4 License usb dongle A9WTC and A9WCC Who knows how to solve this problem? (sos) (sos) (sos) (sos) (sos) (sos) (sos) (sos)
A9WCC
Show
<?xml version="1.0" encoding="utf-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match="/">
<HTML>
<head>
<style type="text/css">
table,th,td{ valign:middle;margin:3px padding:10px border:1px solid 999999;}
td {padding:5px;}
th {padding:5px;}
table{border-collapse:collapse;}
table{width:100%;} th{height:30px;}
body { font-family: Arial; }p { font-size: 8px; }h2 { font-size: 24px; font-style: italic;}ul { font-weight: bolder; }
</style>
</head>
<BODY>
<xsl:apply-templates/>

</BODY>
</HTML>
</xsl:template>
<xsl:template match="/*">
<TABLE style="table-layout: fixed;width: 600px;border-style:solid; border-color:555555" bgColor="ffD600">
<h1>SIMATIC WinCC License Diagnostic Information</h1>
<h3>Overview</h3>
<xsl:for-each select="InfoNode/*">
<TR>
<TD>
<xsl:value-of select="@Name"/>
</TD>
<TD>
<xsl:value-of select="@Value"/>
</TD>
</TR>
</xsl:for-each>

</TABLE>
<br>
</br>
<br>
</br>
<TABLE style="table-layout: fixed;width: 600px;border-style:solid; border-color:555555" bgColor="ffD600">
<h3>DemoData</h3>

<tr align="left">
<th width="150px">Type</th>
<th width="150px">Start</th>
<th width="100px">Runs</th>
<th width="100px">MinutesLeft</th>
<th width="100px">Finished</th>
</tr>

<xsl:for-each select="DemoManager/*">
<TR>
<TD>
<xsl:value-of select="@Type"/>
</TD>
<TD>
<xsl:value-of select="@StartTime"/>
</TD>
<TD>
<xsl:value-of select="@MinutesRun"/>
</TD>
<TD>
<xsl:value-of select="@MinutesLeft"/>
</TD>
<TD>
<xsl:value-of select="@DemoTimeFinished"/>
</TD>
</TR>
</xsl:for-each>

</TABLE>
<p/>
<br/>
<h3>Key</h3>
<table style="table-layout: fixed;width: 600px;">
<tr width="150px" bgcolor="00ff00">Group/License is requested and is OK</tr>
<tr width="150px" bgcolor="ff0000">Group is requested and has problems or License is Missing/Exceeded</tr>
<tr width="150px" bgcolor="ffD600">Group is requested, but not mandatory</tr>
<br/>
</table>
<br>
</br>



<h3>License groups</h3>
<table align="left" style="border-style:solid; border-color:555555" bgcolor="d0d0d0">
<tr align="left">
<th align="left" width="200px">License Group</th>
<th align="left" width="45px">Relevant</th>
<th align="left" width="150px">Type</th>
<th align="left" width="45px">Used</th>
<th align="left" width="45px">Limit</th>
<th align="left" width="45px">OK</th>
<th align="left" width="45px">-spam-</th>
<th align="left" width="45px">Setups Demo</th>
<th align="left" width="45px">Runs Demo</th>
<th align="left" width="45px">Demo Finished</th>
<th align="left" width="45px">Activate Trial</th>
<th align="left" width="45px">Was active</th>
<th align="left" width="45px">ActiveCount</th>
</tr>
<xsl:apply-templates/>
</table>
</xsl:template>

<xsl:template match="Groups/*">
<TR>
<xsl:if test="@WasActive='1' and @AllRelevantLicensesOK='1' and @-spam-='0'">
<TD bgcolor="00ff00">
<xsl:value-of select="@GroupKey"/>
</TD>
</xsl:if>
<xsl:if test="@WasActive='1' and ( @AllRelevantLicensesOK='0' or @-spam-='1') and @IsGroupCustomerRelevant='1'">
<TD bgcolor="ff0000">
<xsl:value-of select="@GroupKey"/>
</TD>
</xsl:if>
<xsl:if test="@WasActive='1' and ( @AllRelevantLicensesOK='0' or @-spam-='1') and @IsGroupCustomerRelevant='0' ">
<TD bgcolor="ffD600">
<xsl:value-of select="@GroupKey"/>
</TD>
</xsl:if>
<xsl:if test="@WasActive=0">
<TD>
<xsl:value-of select="@GroupKey"/>
</TD>
</xsl:if>
<TD>
<xsl:value-of select="@IsGroupCustomerRelevant"/>
</TD>
<TD>
<xsl:value-of select="@LicType"/>
</TD>
<TD>
<xsl:value-of select="@UsedObjectCount"/>
</TD>
<TD>
<xsl:value-of select="@AccuLicensedObjectCount"/>
</TD>
<TD>
<xsl:value-of select="@AllRelevantLicensesOK"/>
</TD>
<TD>
<xsl:value-of select="@-spam-"/>
</TD>
<TD>
<xsl:value-of select="@SetupsDemoMode"/>
</TD>
<TD>
<xsl:value-of select="@RunsInDemoMode"/>
</TD>
<TD>
<xsl:value-of select="@DemoTimeEnded"/>
</TD>
<TD>
<xsl:value-of select="@AllowActivateTrial"/>
</TD>
<TD>
<xsl:value-of select="@WasActive"/>
</TD>
<TD>
<xsl:value-of select="@ActiveCount"/>
</TD>
</TR>
<TR>
<td colspan="13">
<table border="1" bgColor="ffffff">
<tbody align="left">
<tr>
<th width="50px">IsInstalled</th>
<th width="50px">Relevant</th>
<th width="400px">LicenseName</th>
<th width="150px">LicenseKey</th>
<th width="150px">LicenseKeyALM</th>
<th width="150px">Limit</th>
<th width="50px">IsGranted</th>
<th width="250px">GrantedText</th>
<th width="70px">Type</th>
<th width="70px">ALMType</th>
</tr>
<xsl:for-each select="current()/License">
<tr>
<TD>
<xsl:value-of select="@IsInstalled"/>
</TD>
<TD>
<xsl:value-of select="@IsCustomerRelevant"/>
</TD>
<TD>
<xsl:value-of select="@LicenseName"/>
</TD>
<xsl:if test="@IsCustomerRelevant='1' and @IsInstalled='1'">
<TD bgcolor="00ff00">
<xsl:value-of select="@LicenseKey"/>
</TD>
</xsl:if>
<xsl:if test="@IsCustomerRelevant='1' and @IsInstalled='0'">
<TD bgcolor="ff0000">
<xsl:value-of select="@LicenseKey"/>
</TD>
</xsl:if>
<xsl:if test="@IsCustomerRelevant=0">
<TD>
<xsl:value-of select="@LicenseKey"/>
</TD>
</xsl:if>
<TD>
<xsl:value-of select="@LicenseKeyGranted"/>
</TD>
<TD>
<xsl:value-of select="@LicensedObjectCount"/>
</TD>
<TD>
<xsl:value-of select="@IsGranted"/>
</TD>
<TD>
<xsl:value-of select="@LicenseText"/>
</TD>
<TD>
<xsl:value-of select="@LicenseInfoType"/>
</TD>
<TD>
<xsl:value-of select="@ALMType"/>
</TD>
</tr>
</xsl:for-each>
</tbody>
</table>
</td>
</TR>
</xsl:template>

<!-- <xsl:template match="License/*">
<TD>
<xsl:value-of select="@LicenseName"/>
</TD>
</xsl:template>
-->
</xsl:stylesheet>

Post Reply