Need firmware for Danfoss FC302
Need firmware for Danfoss FC302
Hi Guys,
I need to roll back firmware into Danfoss FC302 inverter. Now it is 40.05. I need version 4.38 or earlier.
Where I can find firmware images (files *.ose or *.osx) firmware in Danfoss FC302 using software MCT ?
I need to roll back firmware into Danfoss FC302 inverter. Now it is 40.05. I need version 4.38 or earlier.
Where I can find firmware images (files *.ose or *.osx) firmware in Danfoss FC302 using software MCT ?
Re: Need firmware for Danfoss FC302
In MCT use converter to change firmware and download to FC302.
Re: Need firmware for Danfoss FC302
What is the menu item in the mct 10 for this?
How to download the firmware from the danfoss drive for convert???
How to download the firmware from the danfoss drive for convert???
Re: Need firmware for Danfoss FC302
Hi after you opened your project with MCT right click mouse on the project you will see in the menu convert drive.
Thanks
Thanks
Re: Need firmware for Danfoss FC302
Hi
When I try to write to the drive the project from an early version 4.38 it fails with the following message. Version 5.84 does not overwrite.
![Image](http://i.yapx.ru/vccN.png)
When I try to write to the drive the project from an early version 4.38 it fails with the following message. Version 5.84 does not overwrite.
![Sad :(](./images/smilies/icon_sad.gif)
![Sad :(](./images/smilies/icon_sad.gif)
![Image](http://i.yapx.ru/vccN.png)
Re: Need firmware for Danfoss FC302
Hi in your project you didn't change the voltage to be 380-500 volt and you didn't choose the option A this is reason.
Re: Need firmware for Danfoss FC302
I have adjusted the tension and removed the option. Version 4.38 is not rewritten 5.84. Project loaded good, but in paragraph 15.43 are still version software 05.84.
![Image](http://i.yapx.ru/ve6E.png)
![Image](http://i.yapx.ru/ve6E.png)
Re: Need firmware for Danfoss FC302
Hi what is the reason you want to change the firmware of the drive to 4.38.
Re: Need firmware for Danfoss FC302
Hi
Because the controller omron CJ1-M not familiar with the danfoss 4.38 above. Error "no connection". Program the controller to change there is no possibility
Because the controller omron CJ1-M not familiar with the danfoss 4.38 above. Error "no connection". Program the controller to change there is no possibility
Re: Need firmware for Danfoss FC302
Hi my friend I think the firmware not effect the communication between fc302 and plc you must check setting and wiring , what is the communication between fc302 and plc .
Re: Need firmware for Danfoss FC302
Hi.
When I put outside instead of the frequency Converter Converter firmware 4.38 it works in that place. When I put any other Converter with firmware older than 4.38 - it doesn't work. Meanwhile, they all meet in the fc Protocol when communicating with the laptop.Now I am trying to connect the old inverter VLT5000 FC302 instead.
When I put outside instead of the frequency Converter Converter firmware 4.38 it works in that place. When I put any other Converter with firmware older than 4.38 - it doesn't work. Meanwhile, they all meet in the fc Protocol when communicating with the laptop.Now I am trying to connect the old inverter VLT5000 FC302 instead.
-
- Posts: 5
- Joined: Wed Oct 02, 2019 11:24 am
- Location: Pakistan
Re: Need firmware for Danfoss FC302
Dear, it is official firmware Danfoss doesn't share it with anyone but only authorized service partners.
for further information please contact me at
am.engineer.pk@gmail.com
for further information please contact me at
am.engineer.pk@gmail.com