[?]: anyone know any Free OPC Servers ?

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
ioannistsi
Posts: 18
Joined: Fri May 13, 2016 10:55 am

[?]: anyone know any Free OPC Servers ?

Post by ioannistsi » Sun Sep 18, 2016 8:39 am

Hi, i want to connect an S7-1200 CPU with an Indusoft Scada project but i need an opc server.
The problem is that i can not find a free on nowhere in the net.
I downloaded the NI OPC Server but is only in demo mode for 2 hours, i tried to buy it but it is not supported in my country
Please does anyone know any free opc server capable for the above task?

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Mon Sep 19, 2016 4:23 am

Have you tried OPC Server from Siemens?

(sfaq)
The SIMATIC NET OPC Server on the SIMATIC NET CD Edition 2008 SP2 (V7.1 SP2) can now be used together with the S7-1200
Can be downloaded here:
(dlink)

ioannistsi
Posts: 18
Joined: Fri May 13, 2016 10:55 am

Re: [?]: anyone know any Free OPC Servers ?

Post by ioannistsi » Tue Sep 20, 2016 8:10 pm

I downloaded it but it does not support Windows 7!!!!

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Wed Sep 21, 2016 8:53 pm

Did you try V8.0?

(sfaq)
With SIMATIC NET CD V8.0, SIMATIC NET products are expanded to include various new functions and are able to support the 32-bit Windows 7 Professional and Ultimate operating systems.

ioannistsi
Posts: 18
Joined: Fri May 13, 2016 10:55 am

Re: [?]: anyone know any Free OPC Servers ?

Post by ioannistsi » Thu Sep 22, 2016 6:19 am

I didn't find it in the forum link you posted.Is it in there?Maybe i missed it

CoMod
Site Admin
Posts: 3969
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?]: anyone know any Free OPC Servers ?

Post by CoMod » Thu Sep 22, 2016 7:14 am

Add :?: about [dead] in existed topic
see Simatic Net topic in the Table of content viewtopic.php?f=30&t=2

Post Reply