plcforum.uz.ua

International PLC Forum
It is currently Sat Sep 22, 2018 6:20 pm

All times are UTC + 3 hours




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sat Nov 22, 2014 4:58 pm 

Joined: Sat Nov 22, 2014 6:52 am
Posts: 1
i have an automation studio 6.0 x64 professional edition install file.
but, i couldn't find the crack file.
please help me....


Top
 Profile  
 
PostPosted: Wed Oct 07, 2015 11:07 am 

Joined: Wed Oct 07, 2015 11:04 am
Posts: 1
Hi there,
could you post some download link for instalation. There is no crack for the software curently, but I have team which could try to make working version


Top
 Profile  
 
PostPosted: Wed Oct 14, 2015 12:05 am 

Joined: Tue Feb 24, 2015 11:35 pm
Posts: 1
Version 6 https://torrentz.eu/8ef7c0cf148e0c335d0 ... f01f66fc33
Version 6.1 x32 http://www.jheberg.net/captcha/pas32izfte61020030/
Version 6.1 x64 http://www.jheberg.net/captcha/pas64izfte61020030/

The first one has some "Crack" but directional valves do not work (software crashes when you try to use it). And Directional controll is 95% of the use for the software. I searched the web for a long time and I am pretty sure there is no working crack for this software. If you make one a lot of people would be very grateful.
There is a working 5.6 student version.
Write if you need any more links, information or any type of help.

Thank you


Top
 Profile  
 
PostPosted: Fri Dec 11, 2015 11:23 pm 

Joined: Tue Jun 09, 2015 4:14 am
Posts: 5
the crack for version 6 is ok but direction valve dont work. what you have to do is to download the library of version 5.2 and open it in the library of version 6 and you can get all the valve from there which work correctly


Top
 Profile  
 
PostPosted: Tue Apr 12, 2016 7:45 pm 

Joined: Thu Apr 07, 2016 5:25 pm
Posts: 7
All links are dead... :C


Top
 Profile  
 
PostPosted: Tue Jul 03, 2018 4:21 pm 

Joined: Tue Jul 03, 2018 4:12 pm
Posts: 2
engmann18 wrote:
the crack for version 6 is ok but direction valve dont work. what you have to do is to download the library of version 5.2 and open it in the library of version 6 and you can get all the valve from there which work correctly

V6 doesn't have Libraries folder, what files do I need to replace ?
I tried replacing just Main.xml and i see all the valves but can't change them...



Thanks in advance


Top
 Profile  
 
PostPosted: Tue Jul 03, 2018 8:37 pm 

Joined: Mon Jun 05, 2017 2:03 am
Posts: 5
Try this solution for not working components. Watch the video from 05:22 minute (it's in Spanish but it doesn't matter), download the files for hydraulic,pneumatic,servo components .prx (links are below the video) and do what exactly show. For me it works.

https://www.youtube.com/watch?v=5E-7NFf5NkA&t=165s

Maybe this help you too (but you need the .prx files (link to download below the video)
Solution for not working components (directional valves & servovalves)
Open A.S -> In Library Explorer hit New Library (give a name) -> New category (give a name) -> Open a new project with standard documents and open the folder with working components -> After open select them all and drag and drop in the Library Explorer empty window under defined category name -> Do the same for all working components files -> Last hit Save Library and save them in Catalogues And Libraries as *.prl* files (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries)


Top
 Profile  
 
PostPosted: Mon Jul 09, 2018 4:29 pm 

Joined: Tue Jul 03, 2018 4:12 pm
Posts: 2
TheoPap wrote:
Try this solution for not working components. Watch the video from 05:22 minute (it's in Spanish but it doesn't matter), download the files for hydraulic,pneumatic,servo components .prx (links are below the video) and do what exactly show. For me it works.

https://www.youtube.com/watch?v=5E-7NFf5NkA&t=165s

Maybe this help you too (but you need the .prx files (link to download below the video)
Solution for not working components (directional valves & servovalves)
Open A.S -> In Library Explorer hit New Library (give a name) -> New category (give a name) -> Open a new project with standard documents and open the folder with working components -> After open select them all and drag and drop in the Library Explorer empty window under defined category name -> Do the same for all working components files -> Last hit Save Library and save them in Catalogues And Libraries as *.prl* files (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries)


Thanks ! (pgood)
Just one more thing, I created and saved *.prl* files but each time I exit Automation Studio and start it again it automatically loads only Main library, and can't load previously created library.


Top
 Profile  
 
PostPosted: Mon Jul 09, 2018 6:45 pm 

Joined: Mon Jun 05, 2017 2:03 am
Posts: 5
For me it's work and every time i re-open A.S.6.0. the main and the new created library for working components loaded. Follow the steps as described above and in the video and i hope you solve your problem. Save it in the correct path (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries) and rename it as .prl.


Top
 Profile  
 
PostPosted: Mon Jul 23, 2018 5:24 am 

Joined: Fri Aug 01, 2014 11:57 am
Posts: 1
Could you tell me the files for hydraulic,pneumatic,servo components .prx download links? thx


Top
 Profile  
 
PostPosted: Tue Jul 24, 2018 6:41 pm 

Joined: Fri Dec 23, 2011 12:20 am
Posts: 3
It also happens to me that the created library is not automatically reopened when I relaunch the automation studio.
Also if I try to change the characteristics of a component recovered from the library (for example a 3/2 valve) using the builder, when I try to apply the changes a window appears that tells me that the component is unknown or invalid


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC + 3 hours


Who is online

Users browsing this forum: Google [Bot] and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version