[?] Barcode reader and 1769-L35E CompactLogix

RSLinx, RSLogix, RSView, LogixPro ...
Post Reply
LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

[?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Fri Nov 04, 2011 1:56 pm

Hello,
I have a:
bar code reader SICK CLV series with a ethernet communication;
PLC CompactLogix 1769-L35E (ethernet communication);
HMI Painel View 1000 Plus (ethernet communication);
Switch hirschmann IP69


All components are linked by switch hirschmann but i can not configure the PLC to read de data of barcode. All other components are Ok and ON

I need receive a string data from barcode
(h)

How Configure the PLC???


Help ME

Thanks. :?

dehell
Posts: 104
Joined: Sat Jun 13, 2009 12:25 pm
Location: Europe

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by dehell » Fri Nov 04, 2011 2:16 pm

Hi,
Before, you try to send or read data, you have to know if your barecode reader support Ethernet Industrial protocol.(Ethernet/IP)
For example on Ethernet, Siemens and Rockwell cannot communicate :
Siemens use Industrial Ethernet protocol (IE protocol)
Rockwell use Ethernet Industrial protocol.(Ethernet/IP)
In that case you have to use a gateway...
So for you application, you have to verify, which protocol your barecode reader support...
Best regards

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Fri Nov 04, 2011 4:09 pm

is the first time I work with this type of integration.
I do not know how to get this work...

i´m LOST rsrs


Thanks friend.

dehell
Posts: 104
Joined: Sat Jun 13, 2009 12:25 pm
Location: Europe

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by dehell » Fri Nov 04, 2011 4:21 pm

Hi,
What is the type of SICK bar code reader? (number model?)

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Fri Nov 04, 2011 5:26 pm

CLV62x Séries.

I already changed the IP number of the barcode
it can receive data through the Hirschmann
I do not know how to use them in the PLC.


would be the same as a generic ethernet module.
I was told that using a as MSG instruction, but i could not configure.

(nuser)

bilbo_321
Posts: 87
Joined: Wed May 19, 2010 2:22 pm
Location: Bulgaria

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by bilbo_321 » Sat Nov 05, 2011 7:05 am

Please type the exact barcode reader type. There is a range of CLV62x products with different communication options.
For example: CLV620-0120 supports CAN, Ethernet TCP/IP, and EtherNet/IP available on board, no additional
gateway needed (depending on variant)...

There is a sample code at SICK web site -> Service & Support -> Software: http://www.sick.com/us/en-us/home/servi ... ident.aspx

Cheers.

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Mon Nov 07, 2011 2:04 pm

bilbo_321 wrote:Please type the exact barcode reader type. There is a range of CLV62x products with different communication options.
For example: CLV620-0120 supports CAN, Ethernet TCP/IP, and EtherNet/IP available on board, no additional
gateway needed (depending on variant)...

There is a sample code at SICK web site -> Service & Support -> Software: http://www.sick.com/us/en-us/home/servi ... ident.aspx

Cheers.


Hi is a CLV620-1120

bilbo_321
Posts: 87
Joined: Wed May 19, 2010 2:22 pm
Location: Bulgaria

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by bilbo_321 » Wed Nov 16, 2011 4:42 pm

Hi LenPatrick,

did you found the sample code from SICK web site?
I could upload it to Rapidshare if you have any troubles?

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Wed Nov 16, 2011 5:42 pm

bilbo_321 wrote:Hi LenPatrick,

did you found the sample code from SICK web site?
I could upload it to Rapidshare if you have any troubles?

Hello Bilbo
Do you know how to send a string from the Barcode Reader to the PLC
I need to know everything that is related to the comunication of the Barcode Reader and the PLC
And you can upload it to Rapidshare, i have no troubles
Thanks

bilbo_321
Posts: 87
Joined: Wed May 19, 2010 2:22 pm
Location: Bulgaria

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by bilbo_321 » Thu Nov 17, 2011 12:28 pm

sample code from SICK web site: https://rapidshare.com/files/4017462229 ... amples.zip
There is a pdf file in archive. It could give answers to your question.

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Thu Nov 17, 2011 7:01 pm

Bilbo
Thanks

You really helped me, my problem is near to the end.
This sample clarified many of my doubts.

I'll apply it in my equipament and brave i will show the results.


Cheers



Lenon Patrick
JVS Automation
(Fabricom "Sistems D'Assemblages"
Group GDF Suez)

bilbo_321
Posts: 87
Joined: Wed May 19, 2010 2:22 pm
Location: Bulgaria

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by bilbo_321 » Fri Nov 18, 2011 9:39 am

I am glad to help you.
That's the idea of this forum, to exchange knowledge and hepl each other.

Good luck!

LenPatrick
Posts: 10
Joined: Tue Oct 11, 2011 2:49 pm

Re: [?] Barcode reader and 1769-L35E CompactLogix

Post by LenPatrick » Tue Jun 25, 2013 2:53 pm

Hi
I´m Back muahaha
Sorry for the time without answering
Just for close this topic
The technical support the SICK spent a wrong program. With the correct program the communication is established and all components work correctly.

(clap)

Post Reply