plcforum.uz.ua

International PLC Forum
It is currently Thu Oct 19, 2017 12:13 pm

All times are UTC + 3 hours




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Mar 21, 2011 11:55 pm 

Joined: Sat Feb 26, 2011 1:31 am
Posts: 10
Hi
I'm looking for IEC 60870-5-104 and IEC 60870-5-101 standards. Please share if you have them :)
Best regards


Top
 Profile  
 
PostPosted: Tue Mar 22, 2011 8:10 am 

Joined: Tue Jun 27, 2006 8:52 am
Posts: 500
Location: Russia
Sorry, only in Russian
http://narod.ru/disk/8087551001/GOST_TM.rar.html
Quote:
Только на русском
Архив включает в себя ГОСТ Р МЭК серии 870. Части №1,2,3,4,5,6.
В 5 части присутствуют протоколы, столь популярные в электроэнергетике для систем телемеханики - 101,103 и 104
Там же в папке, есть рекомендации для разработчика по реализации 101 и 104 протоколов от Системного оператора ЕЭС России


Top
 Profile  
 
PostPosted: Tue Mar 22, 2011 12:19 pm 

Joined: Sat Feb 26, 2011 1:31 am
Posts: 10
Thanks but i need in english :)


Top
 Profile  
 
PostPosted: Tue Mar 22, 2011 2:53 pm 

Joined: Sun Feb 12, 2006 8:47 pm
Posts: 183
Location: Europe
Hi,
Look here

viewtopic.php?f=3&t=15053&p=43300&hilit=60870#p43300

regards


Top
 Profile  
 
PostPosted: Wed Mar 23, 2011 12:39 am 

Joined: Sat Feb 26, 2011 1:31 am
Posts: 10
Thanks a lot :) exaclly what i needed.


Top
 Profile  
 
PostPosted: Fri Aug 12, 2011 5:26 pm 

Joined: Tue Jun 28, 2011 12:46 pm
Posts: 33
Location: Padova (IT)
here a new simulator release (demo working 5 min)
http://www.mitraware.com/


Top
 Profile  
 
PostPosted: Fri Aug 12, 2011 7:26 pm 

Joined: Tue Jun 27, 2006 8:52 am
Posts: 500
Location: Russia
Freeware simulator IEC 104 Slave
Language - Russian
IEC104Slave.rar

Sources for C++ IEC 870-5-101/104 Master / Slave, + lib+demo.exe
Language - English
Lib870-5Demo.rar


Top
 Profile  
 
PostPosted: Wed Aug 23, 2017 2:49 pm 

Joined: Fri Oct 07, 2016 5:03 pm
Posts: 1
I was cracked this software
IEC 870-5-104 Simulator version 1.3.7

Product key Features:

Easy to use Simulator for IEC 870-5-104 protocol
Simulate master and slave protocol
Support multiple master for slave device
Support structure and unstructure point address
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file
Download:https://drive.google.com/file/d/0BydlY7UxiljGdTk1SE52Y1BDRGc/view?usp=sharing
IEC 870-5-101 Simulator
Product key Features:

Easy to use simulator tool for IEC 60870-5-101 protocol
Simulate master and slave protocol
Raw Data capture by using two serial ports
Modem dialup on master device
Support structure and unstructure point address
Support balance and unbalance data transmission
Suitable for troubleshoting and communication test
Monitor raw data exchange
Translate raw data into more meaningful information
Help to develop SCADA/HMI project wihout connected with the real RTU
Simulate Command and Feedback Status
Simulate Setpoint and Feedback Analog
Simulate Step Command and Feedback Step Position
Import master and slave tags from excel file

Download: https://drive.google.com/file/d/0BydlY7UxiljGRy1fOGp4d1FjU28/view?usp=sharing
OPC Explorer Version 1.0.2
Product key Features:

Support OPC Data Access 1.0 and 2.0
Connect to multiple OPC Servers
Connect to Local Or Remote OPC Server
Browse OPC Server tags
Scaling for Analog data points
Historical records, Save the data changes
Dowload: https://drive.google.com/file/d/0BydlY7UxiljGc21lVzhOVnk2RGs/view?usp=sharing

If you see errors contact me!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC + 3 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version