[?]: Unlock Omron CJ1M password protection

Post Reply
aelg
Posts: 10
Joined: Sun Oct 26, 2008 4:01 pm
Location: Venezuela

[?]: Unlock Omron CJ1M password protection

Post by aelg » Mon Feb 23, 2009 8:18 pm

Hi. Iam trying to recover a program for a CJ1M-CPU21 saved in a CF card but the .OBJ file is password protected.
The password seems to be 8 characters long (numbers and/or letters).
I've have tried looking for an 8-characters string at the .OBJ file after opening it with Winhex but failed.
The password must be embbeded in this .OBJ file
but I don't know how to look after it.
Does anybody know how to do it?

PD: I can email the .OBJ program to anyone if required

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Unlock Omron CJ1M password protection

Post by anwer shahzad » Mon Feb 23, 2009 8:40 pm

hi aelg

you see PM message

from

Anwer Shahzad
Last edited by anwer shahzad on Tue Feb 24, 2009 8:21 am, edited 1 time in total.

aelg
Posts: 10
Joined: Sun Oct 26, 2008 4:01 pm
Location: Venezuela

Re: Unlock Omron CJ1M password protection

Post by aelg » Mon Feb 23, 2009 9:50 pm

Hi Anwer. Thanks for your reply. I sent you a message with my email. Any help will be appreciated,

Regards

chunhoong_79
Posts: 2
Joined: Wed Jul 30, 2008 9:34 am
Location: Singapore

Post by chunhoong_79 » Fri Jun 05, 2009 8:52 am

Hi Anwer & Aelg,

I'm also facing the same problem- trying to recover the password protected program from a CJ1M-CPU11, which the password is lost.

Can please let me know how to do it?
(I'll also email PM to you all..)
Thanks.

mr_stimpy
Posts: 2
Joined: Sat Jun 06, 2009 12:04 pm
Location: Europe

Post by mr_stimpy » Sat Jun 06, 2009 12:33 pm

Hi Everybody!

I had read the topics about unlocking read password protections, but I'm a little bit confused.

My problem is: there is a running SYSMAC C200HE-CPU42 which is read protected. So when I've tried the CX-ONE 7.0 "AutoOnline" function to upload the existing project from CPU, it showed a message, that the "UM" is protected, so it couldn't copy that project. But there was no chance for user to write the right protection code. (Theoretically this code is known.) I saw two links for 1. reading out protecion code and 2. PLC BackUp Tool. With the first I can only get to know about the enabled UM code? Or it disables it too? And the PLC Backup tool can read all data from PLC CPU, when UM read code is activated? And a final important question, when I use any of these programs, PLC CPU goes into stop mode??

Thank You for any help!

Best regards: Mr Stimpy

viglac
Posts: 42
Joined: Sat Dec 15, 2007 4:19 pm
Location: Viet Nam

Post by viglac » Sat Jun 06, 2009 4:03 pm

mr_stimpy wrote:Hi Everybody!

I had read the topics about unlocking read password protections, but I'm a little bit confused.

My problem is: there is a running SYSMAC C200HE-CPU42 which is read protected. So when I've tried the CX-ONE 7.0 "AutoOnline" function to upload the existing project from CPU, it showed a message, that the "UM" is protected, so it couldn't copy that project. But there was no chance for user to write the right protection code. (Theoretically this code is known.) I saw two links for 1. reading out protecion code and 2. PLC BackUp Tool. With the first I can only get to know about the enabled UM code? Or it disables it too? And the PLC Backup tool can read all data from PLC CPU, when UM read code is activated? And a final important question, when I use any of these programs, PLC CPU goes into stop mode??

Thank You for any help!

Best regards: Mr Stimpy
C200-CPM1- CQM1-CQM1H password recovery
Look : http://plc.net.ru/viewtopic.php?t=10592
Last edited by viglac on Sun Jun 07, 2009 6:17 am, edited 3 times in total.

aelg
Posts: 10
Joined: Sun Oct 26, 2008 4:01 pm
Location: Venezuela

Post by aelg » Sat Jun 06, 2009 6:34 pm

mr_stimpy wrote:Hi Everybody!

I had read the topics about unlocking read password protections, but I'm a little bit confused.

My problem is: there is a running SYSMAC C200HE-CPU42 which is read protected. So when I've tried the CX-ONE 7.0 "AutoOnline" function to upload the existing project from CPU, it showed a message, that the "UM" is protected, so it couldn't copy that project. But there was no chance for user to write the right protection code. (Theoretically this code is known.) I saw two links for 1. reading out protecion code and 2. PLC BackUp Tool. With the first I can only get to know about the enabled UM code? Or it disables it too? And the PLC Backup tool can read all data from PLC CPU, when UM read code is activated? And a final important question, when I use any of these programs, PLC CPU goes into stop mode??

Thank You for any help!

Best regards: Mr Stimpy
Hi Stimpy. I'm not sure but I think you can use Systools 1.5 (password release tool) to unlock Omron Series C password protected PLCs. Here you can download it:

http://forums.mrplc.com/index.php?s=979 ... owfile=414

Good Luck,

aelg

mr_stimpy
Posts: 2
Joined: Sat Jun 06, 2009 12:04 pm
Location: Europe

Post by mr_stimpy » Sun Jun 07, 2009 10:45 am

Thank You, I'll try it. Bye

aelg
Posts: 10
Joined: Sun Oct 26, 2008 4:01 pm
Location: Venezuela

Post by aelg » Sun Jun 07, 2009 2:54 pm

mr_stimpy wrote:Thank You, I'll try it. Bye
Ok. I checked systool 1.5 (a really great set of utilities for C series Plcs) and the password set reset tool is no longer there. It is included in systool 1.1 which you can download at the same website. Sorry about that. Here's the link:
http://forums.mrplc.com/index.php?autoc ... owfile=409

Good luck,

aelg

olgalex
Posts: 1
Joined: Thu Feb 11, 2010 2:50 pm

Re: [?]: Unlock Omron CJ1M password protection

Post by olgalex » Thu Mar 04, 2010 12:01 pm

Hi aelg & anwer shahzad! ,
trying to take the program with CJ1M-CPU21, that the "UM" is protected. Can I recover the password without the use CF card, computer connected to the plc.

Thank You for any help!

anwer shahzad
Posts: 169
Joined: Tue Sep 12, 2006 7:12 pm

Re: [?]: Unlock Omron CJ1M password protection

Post by anwer shahzad » Thu Mar 04, 2010 3:41 pm

hi olgalex ,chunhoong_79 and ALL

you see http://plc.net.ru/viewtopic.php?f=11&t=6206

from

Anwer Shahzad

E066
Posts: 9
Joined: Mon Feb 22, 2010 11:18 am
Location: Portugal

Re: [?]: Unlock Omron CJ1M password protection

Post by E066 » Fri Mar 05, 2010 11:00 pm

aelg wrote:Hi. Iam trying to recover a program for a CJ1M-CPU21 saved in a CF card but the .OBJ file is password protected.
The password seems to be 8 characters long (numbers and/or letters).
I've have tried looking for an 8-characters string at the .OBJ file after opening it with Winhex but failed.
The password must be embbeded in this .OBJ file
but I don't know how to look after it.
Does anybody know how to do it?

PD: I can email the .OBJ program to anyone if required
Hi.

Did you find the solution to remove the password from CJ1M-CPU21? I have allready unlocked a CJ1M-CPU12 and maybe i can help you if you need...

aliam
Posts: 4
Joined: Wed May 06, 2009 3:48 am

Re: [?]: Unlock Omron CJ1M password protection

Post by aliam » Tue Jul 20, 2010 10:38 am

aelg wrote:Hi. Iam trying to recover a program for a CJ1M-CPU21 saved in a CF card but the .OBJ file is password protected.
The password seems to be 8 characters long (numbers and/or letters).
I've have tried looking for an 8-characters string at the .OBJ file after opening it with Winhex but failed.
The password must be embbeded in this .OBJ file
but I don't know how to look after it.
Does anybody know how to do it?

PD: I can email the .OBJ program to anyone if required
Hi all
I can do this,I test a way for find the password from obj file
you must open the obj file with any Hexeditor program and see the password.
for more info you can send to me a mail.

junior
Posts: 4
Joined: Wed Sep 22, 2010 10:14 am

Re: [?]: Unlock Omron CJ1M password protection

Post by junior » Wed Sep 22, 2010 4:08 pm

Yes, but if the programmer has prohibited from writing to memory card, you will not be able to view OBJ file.
I think?
If anybody has a better option for password unlock, pls say.


Regards
junior

junior
Posts: 4
Joined: Wed Sep 22, 2010 10:14 am

Re: [?]: Unlock Omron CJ1M password protection

Post by junior » Wed Sep 22, 2010 4:10 pm

E066 wrote:
aelg wrote:Hi. Iam trying to recover a program for a CJ1M-CPU21 saved in a CF card but the .OBJ file is password protected.
The password seems to be 8 characters long (numbers and/or letters).
I've have tried looking for an 8-characters string at the .OBJ file after opening it with Winhex but failed.
The password must be embbeded in this .OBJ file
but I don't know how to look after it.
Does anybody know how to do it?

PD: I can email the .OBJ program to anyone if required
Hi.

Did you find the solution to remove the password from CJ1M-CPU21? I have allready unlocked a CJ1M-CPU12 and maybe i can help you if you need...

Hi,
Can you tell me how to unlock CJ1 password?
i promise i will not tell anyone.

BR
vedran

inf22
Posts: 4
Joined: Sun Sep 19, 2010 6:12 am

Re: [?]: Unlock Omron CJ1M password protection

Post by inf22 » Wed Sep 22, 2010 5:46 pm

junior

Upload program, if posible, on CF card.
1. Insert the CF card
2. Switch the switch 7 to ON
3. Press MCPWR for 3 seconds
4. When the transfer finishes, LEDs Busy and MCPWR turn off
5. Switch the switch 7 to OFF

Open .obj file in WinHex
You can find password on program - offcet from C8 to CF, password for task D0 to D7, this is clear text.

PS. Sorry for my bad english.

andreik
Posts: 1
Joined: Thu Sep 23, 2010 3:40 am

Re: [?]: Unlock Omron CJ1M password protection

Post by andreik » Thu Sep 23, 2010 3:53 am

Hi inf22,

You mean to say it is possible to retrieve/access the Omron PLC (CJ/CS) Program which is UM Protected through CF Card directly? I'm wondering if it's possible. Enlighten me please. Thank you very much.

Yours,
Andrei/Philippines

junior
Posts: 4
Joined: Wed Sep 22, 2010 10:14 am

Re: [?]: Unlock Omron CJ1M password protection

Post by junior » Thu Sep 23, 2010 6:27 am

I think i tried already bud did not find OBJ file on my memory card and this is because the user prohibited to saving on memory card.
Correct me if i am wrong pls.

BR
junior

inf22
Posts: 4
Joined: Sun Sep 19, 2010 6:12 am

Re: [?]: Unlock Omron CJ1M password protection

Post by inf22 » Thu Sep 23, 2010 12:16 pm

junior

Yes if user to protect saving on memory card, this metod not correct. Need to find another solution.

junior
Posts: 4
Joined: Wed Sep 22, 2010 10:14 am

Re: [?]: Unlock Omron CJ1M password protection

Post by junior » Wed Sep 29, 2010 5:51 am

inf22 wrote:junior

Yes if user to protect saving on memory card, this metod not correct. Need to find another solution.

What is the solution when user prohibited to saving onto a memory card?

BR
junior

ruwanga
Posts: 1
Joined: Thu Dec 09, 2010 6:17 pm

Re: [?]: Unlock Omron CJ1M password protection

Post by ruwanga » Thu Dec 09, 2010 6:30 pm

please if u can send the omron plc password unlock software

xuankhanh
Posts: 21
Joined: Fri Dec 21, 2012 2:10 am

Re: [?]: Unlock Omron CJ1M password protection

Post by xuankhanh » Sun Aug 03, 2014 2:39 pm

my company have plc omron cj2m with USB communication.
can you tell me software to unlock password ???

letranlong
Posts: 79
Joined: Tue Jul 15, 2014 5:05 pm

Re: [?]: Unlock Omron CJ1M password protection

Post by letranlong » Tue Aug 26, 2014 2:31 am

xuankhanh wrote:my company have plc omron cj2m with USB communication.
can you tell me software to unlock password ???
dear xuan khanh
nice to meet you xuan khanh and everybody
xuan khanh, where are you from?
can you help me?
the first i want study plc of omron
so i think. it has very helpfull , in the work of me
so I think, i need know unlock password protection plc
-- I will do it by myself, although , I know this is very difficult for
me. so I want to try , I try to test it, and unlock password plc
the first. when I work it, I can make lost the all data, the but I also
want test.
please, you speek for me know
how can you show me step by step. how is unlock passoword plc program?

I use sowftware unlock password protection plc Omron, software XTAL unlock
password a code AR1001 => [ FUN (49) => [ 000 ] => password [ #1234 ]
when I set password for plc program
example whole program protection
------------------------------------------------[
AR100.01]---------------------[FUN49 ]
0
0
PASSWORD 1235
--------------[
000]----------------------------------------------------------------[1000]

--------------[001]-----------------------------------------------------------------[1001]
this time, I use software XTAL unlock password protection ok



but when I test an example of partial program protection


--------------[
000]----------------------------------------------------------------[1000]

------------------------------------------------[
AR100.01]---------------------[FUN49 ]
0
0
PASSWORD 1235

--------------[001]-----------------------------------------------------------------[1001]
now. I use software XTAL ,it's doesn't find see password protection
please help me
I have a question for you
when I setting passwosd protection, box dialog below here

--------------[
000]----------------------------------------------------------------[1000]

------------------------------------------------[
AR100.01]---------------------[FUN49 ]
0
0
PASSWORD 1235

--------------[001]-----------------------------------------------------------------[1001]
can you showed me step by steps unlock password or releasing the passord
protection ?
how is unlock password plc CPM1A ?
how is releasing the passord protection ?
thank you

Post Reply