SIMATIC S7-200/300/400, Step7, PCS7, CFC, SFC, PDM, PLCSIM,
SCL, Graph, SPS-VISU S5/S7, IBHsoftec, LOGO ...
-
ali1358
- Posts: 28
- Joined: Thu Feb 21, 2008 5:20 am
- Location: Iran
Post
by ali1358 » Sat Sep 06, 2008 4:14 pm
thanx for the simulator.
how can i use are u have manual or sth like that for above,
ali1358
-
KarimAliali
- Posts: 3
- Joined: Thu Jul 24, 2008 9:31 pm
- Location: Egypt
Post
by KarimAliali » Mon Sep 08, 2008 12:36 pm
first:export your project as .awl (microwin >>file>>export)
then load this file to simulator (program >> load program)
note:select your cpu in simualtor (configuration >> cpu type)
also if the simulator is slowly Click button ALT in keyboard
-
dekor
- Posts: 114
- Joined: Wed Jan 03, 2007 9:10 pm
- Location: Europe
Post
by dekor » Mon Sep 08, 2008 5:34 pm
If you want to simulate the functions of TD200
Complete the TD200 wizard. This will generate an user DB.
You have to copy on clipboard of windows all text of user DB which is generate by TD wizard.
In the simulator you will "paste DB"
This procedure is working only on TD200 display.
For TD200C is not working.
Success.
dekor.
-
reymond_craig
- Posts: 139
- Joined: Wed Sep 26, 2007 2:57 am
- Location: Philippines
Post
by reymond_craig » Tue Feb 17, 2009 2:09 am
Hi,
Is there a passibility to simulate memory bits like M0.0 and so oN, in this simulator. I tried to use help but it don't have.
Thank you very much.
Regards,
Rey
-
Coyote
- Posts: 41
- Joined: Wed Sep 06, 2006 10:07 am
- Location: Slovenia
Post
by Coyote » Wed Feb 18, 2009 5:08 pm
When I try to export .awl code from microwin it exports only the program block that is visible in editor at that time, I cannot export all program blocks. Any suggestions?
-
dekor
- Posts: 114
- Joined: Wed Jan 03, 2007 9:10 pm
- Location: Europe
Post
by dekor » Wed Feb 18, 2009 6:24 pm
That is OK.
Then you need also the Data block you will open , select all and in the simulator you will paste. The transfer is made by windows "clipboard".
If you need I will make a short movie for you.
dekor
-
Buxexas
- Posts: 65
- Joined: Thu Dec 27, 2007 5:47 pm
- Location: Europe
Post
by Buxexas » Sun Feb 22, 2009 2:03 am
thanks
-
toos tablo
- Posts: 23
- Joined: Thu Oct 22, 2009 5:57 pm
Post
by toos tablo » Fri Dec 04, 2009 7:11 pm
Hi
I don`t worked with s7-200 simulatore ( with td200 ) .
please help me
thanks
-
Yury
- Posts: 65
- Joined: Thu Nov 01, 2007 9:41 pm
- Location: Belarus
Post
by Yury » Thu Mar 10, 2011 10:20 pm
-
Abigail_Dea
- Posts: 5
- Joined: Fri Jan 30, 2015 7:27 am
Post
by Abigail_Dea » Tue Dec 29, 2015 5:58 pm
Hi,
Is it possible to re-upload the link of S7-200 simulator.
Thanks.
Leo
-
loconejo
- Posts: 8
- Joined: Tue Aug 04, 2015 1:13 pm
Post
by loconejo » Wed May 03, 2017 12:01 pm
Hello friends, the download link on the page has errors, the correct link is:
http://perso.ya.com/canalPLC/S7_200_ING.zip
Where the word "personal" appears, you should put "perso".
-
Homeroid_BL
- Posts: 259
- Joined: Fri Apr 03, 2009 3:24 pm
- Location: Bosnia and Herzegovina
Post
by Homeroid_BL » Thu May 11, 2017 5:53 am
Not a correct link.