привода и частотники
-
nnaf
- Posts: 30
- Joined: Sun Apr 15, 2007 3:25 pm
- Location: Russia
Post
by nnaf » Sat Feb 16, 2008 5:03 pm
Hi all! It is bad, that nobody has backed up this subject. Probably, on a forum all are interested only by(with) the programs. It is not interesting, more to spread the schemes I shall not be.
in Russian wrote:Привет всем!
Плохо, что никто не поддержал эту тему.
Возможно, на форуме всех интересуют только программы.
Это не интересно, больше выкладывать схемы не буду.
-
CoMod
- Site Admin
- Posts: 3976
- Joined: Thu Feb 16, 2006 3:25 pm
- Location: Russia
-
Contact:
Post
by CoMod » Sat Feb 16, 2008 6:42 pm
Thanks for schemes
in Russian wrote:За выложенные тобой схемы могу сказать СПАСИБО.
Я думаю, что кому нибудь они будут полезны даже для общего развития (а также преподавателям курсов по частотникам), чтобы аргументированно говорить с людьми напускающими туман в области схемотехники частотников.
Конкретными схемами интересуются спецы знакомые со схемотехникой и у которых что то уже сгорело в имеющемся частотнике.
В журнале Радио была опубликована схема самопального частотника.
Где то видел схему на 580ВМ80 и 580ВИ53.
Схемы Сименсов в свободном доступе не было по причине того, что они имеются только у сервисной службы - а им видимо не хочется ими делиться (даже на анонимной основе).
Я могу разобрать частотник, но вот декриптовать разводку в схему особого желания сейчас у меня нет, так как я и так знаю принципы работы частотника. Фотки плат есть в инете.
По молодости я любил декриптовать логические цифровые платы.
Так что не обижайся.
-
boldive
- Posts: 21
- Joined: Wed Jan 23, 2008 1:22 am
- Location: America
Post
by boldive » Thu Mar 20, 2008 10:52 pm
Thanks a lot!
Do you or anyone have a schematics for the Indramat Drives?
in Russian wrote:Спасибо за схемы. У нас как раз эти драйвы стоят. Может у кого есть схемы для Indramat Drives?
-
Alexsander
- Posts: 27
- Joined: Mon Dec 03, 2007 2:01 pm
- Location: Ukraine
Post
by Alexsander » Fri Mar 21, 2008 2:57 pm
Thanks for schemes
in Russian wrote:Большое спасибо за схемы частотников.
Думаю выражаю благодарность всех тех спецов которые сталкиваются в практике с данным оборудованием.
Еще раз спасибо и удачи.
-
ALEXSYSTEMS
- Posts: 4
- Joined: Wed Apr 23, 2008 9:36 pm
- Location: BRASIL
Post
by ALEXSYSTEMS » Thu May 01, 2008 2:59 pm
CONGRATULATIONS!!!
Very good his/her initiative in collaborating with the community of engineers and technicians of automation dispersed for the world.
That all are motivated for his/her initiative.
I have some outlines that I created the hand to solve problems in Drives and I will also publish.
Thank you very much!!!!
-
flopez
- Posts: 99
- Joined: Sat Feb 25, 2006 11:33 pm
- Location: Europe
Post
by flopez » Wed May 28, 2008 11:46 pm
Thanks for your participation
flopez
-
flopez
- Posts: 99
- Joined: Sat Feb 25, 2006 11:33 pm
- Location: Europe
Post
by flopez » Thu May 29, 2008 1:44 pm
Hi nnaf
by my part I am interested in allotment these projects, and am thankful already what allotment you.
Please it has schemes of Indramat and Simodrive Siemens and source Siemens.
Thanks
flopez
nnaf wrote:Hi all! It is bad, that nobody has backed up this subject. Probably, on a forum all are interested only by(with) the programs. It is not interesting, more to spread the schemes I shall not be.
-
venix
- Posts: 122
- Joined: Fri Feb 29, 2008 4:17 pm
- Location: Europe
Post
by venix » Sat Apr 04, 2009 5:21 pm
Hello!
Now I have a drive with problems(Commander SE) and I'm sure that Commander SE schematics will help me.
Thank you very much!
PS:If you have some other CT schematics that will help(Unidrive SP
) please share.
Best regards!
Venix
Hi everybody!
And why there is no theme with basic circuits of drives, think that many have interest to this information.
The first coin in the common coin box.
Schemes of Unidrive Commander SE from Control Techniques
in Russian wrote:
Принципиальные схемы частотников Unidrive Commander SE from Control Techniques
Link_is_Dead :(/Commander_SE.rar
-
BARIK
- Posts: 8
- Joined: Tue Jun 02, 2009 1:49 pm
- Location: Ukraine
Post
by BARIK » Tue Jun 02, 2009 2:26 pm
мне нужн схемы на controllteh/ UNIDRIVE SP (SP1406). взорвался IGBT И потянул за собой электронику. голова работает показывает вых.частоту а с частотника ничего нету
-
mario_ingen
- Posts: 26
- Joined: Tue Apr 13, 2010 11:21 pm
Post
by mario_ingen » Sun May 23, 2010 9:52 pm
I need to know if the communication cable to control drive tecnique (Emerson) is a converter 485 or it is and if protocolarizado and if they have the programming cable pinout communication
Thanks
-
nikita kruschev
- Posts: 3
- Joined: Wed Nov 18, 2009 11:14 pm
Post
by nikita kruschev » Wed Oct 06, 2010 1:20 am
Hello nnaf, I tryed send to you 4 messages ask for these schemes.
But I think there are problems on the forum.
Could we talk about these schemes by E-mail? Or could you post the schemes in this topic?
I need this...Very much!
Sorry for my poor English.
-
CoMod
- Site Admin
- Posts: 3976
- Joined: Thu Feb 16, 2006 3:25 pm
- Location: Russia
-
Contact:
Post
by CoMod » Wed Oct 06, 2010 5:06 am
nikita kruschev wrote:Hello nnaf, I tryed send to you 4 messages ask for these schemes.
But I think there are problems on the forum.
Could we talk about these schemes by E-mail? Or could you post the schemes in this topic?
Rapidshare and Narod link tested - is Ok.
Russian wrote:В чём проблема?
Ссылки рабочие
-
nikita kruschev
- Posts: 3
- Joined: Wed Nov 18, 2009 11:14 pm
Post
by nikita kruschev » Thu Oct 07, 2010 12:12 am
Yeah, after some tentatives I got it. But on the private messages I asked if he has others schemes.(Siemens, Yaskawa, Danfoss etc..)
That's it.