[?+]: Crack of IGE-XAO SEE ELECTRICAL CAD

обсуждение прочих программных продуктов:
Тools, Elcad, Eplan, ...
Post Reply
alfredo
Posts: 8
Joined: Thu Feb 14, 2008 4:05 pm
Location: Europe

[?+]: Crack of IGE-XAO SEE ELECTRICAL CAD

Post by alfredo » Thu Feb 21, 2008 6:45 am

I am in search of crack for the program SEE ELECTRICAL IGE-XAO
In company have original software with USB key version of "See Electrical Expert 2005 - R3 Service Pack 3B"
I like to find the crack in order to make tests at home,
if anyone has the link even earlier version (not too),
I would a big favour
Thanks x Any information

czepcu
Posts: 3
Joined: Wed Sep 26, 2007 6:21 am
Location: Poland

Post by czepcu » Sat Feb 23, 2008 5:12 pm

SEE Electrical Expert is protected by HASP, but the protection algorithm is very simple. I don't use this software anymore (Eplan is much better) but the last version i used (cracked by me) was 2005 SP4E (only one file must be replaced - C:\Program Files\See Electrical Expert 2005\see_soft\Exe\SeeStencil.dll). I don't know is it works with never versions of SEE.
I uploaded patched version of SeeStencil.dll on rapidshare:
Link_is_Dead :(/Se ... l.dll.html

czepcu
Posts: 3
Joined: Wed Sep 26, 2007 6:21 am
Location: Poland

Post by czepcu » Sun Feb 24, 2008 7:04 am

It's problem with your version of SEE (2002). This patch was build for 2005 V3R3 SP4E polish version (i didn't tested this in another language version of SEE because only version i have is polish). If language isn't problem for you i can upload 2005 V3R3 SP4E polish version on rapidshare (about 350MBytes packed)
Last edited by czepcu on Sun Feb 24, 2008 9:12 am, edited 1 time in total.

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Sun Feb 24, 2008 7:43 am

czepcu
many thanks for your reply but i don't understand language Polish.
i will try to search new version, thanks for file and help.
most

alfredo
Posts: 8
Joined: Thu Feb 14, 2008 4:05 pm
Location: Europe

Post by alfredo » Mon Feb 25, 2008 3:42 pm

My Italian version does not accept, can see what is in Polish, you have the original DLL can be compared with the dll craccata perhaps you can understand with HEX editor if you can unprotect

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Re: See Electrical V4R1

Post by most » Sun Sep 07, 2008 9:14 am

Gene wrote:Hello guys,
does somebody have medicine for See Electrical V4R1?
This last version I've downloaded from ige-xao site.
Thanks.
this is the patch but only for 30 days, in the end of this time run again and the program functions well.

ftp://ftp.ige-xao.dk/caddy++/
http://www.ige-xao.com/icons/ige/anglai ... l_v4r1.exe
by _Legolas
Link_is_Dead :(/s ... -patch.rar
or
http://narod.ru/disk/2451462000/see.ele ... h.Link_is_Dead :(

regards

corvo
Posts: 2
Joined: Thu Nov 13, 2008 1:33 am

Post by corvo » Fri Nov 14, 2008 12:03 am

I have a trial version cd of caddy electrical v4r1.I put run the program in my desktop(win xp), and it works well, then i try to put run in my laptop(win vista),but during the install process an error apear(can make the registry of C:\windows\system\CADdyX.ocx),and the program is blocked.Does anyone can help me ?

bsod
Posts: 36
Joined: Sat Jan 24, 2009 11:11 am
Location: Europe

SEE Electrical v4r1

Post by bsod » Sun Jan 25, 2009 12:13 pm

for testing...

Download: http://www.ige-xao.com/icons/ige/anglai ... l_v4r1.exe

- install it
-make a Backup of the CAEManager.exe
-open the CAEManager.exe with a Hex-Editor and change the Offset 00089877h from 74 to 75
-check that the value in the offset is 74 before you change !!!
-save the File
-change the Software License to "Hardware Key"

niila
Posts: 94
Joined: Sun May 28, 2006 10:28 am
Location: Bosnia&Hercegovina

Post by niila » Sun Jan 25, 2009 3:34 pm

works fine... not problem for now :lol:
thanx great job

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Mon Jan 26, 2009 12:10 pm

for me also it functions very well

most

budulaj
Posts: 1
Joined: Tue Jun 30, 2009 8:01 am
Location: Europe

Post by budulaj » Wed Sep 09, 2009 11:57 am

License Nr. 59685800

Stromlaufplan: 004ODFIS8C00 (Advanced)

Hausinstalation: 009GYNH8QG00 (Advanced)

Schaltschrank: 00HJDKISMM00 (Advanced)

Gogi66
Posts: 10
Joined: Fri Sep 22, 2006 7:02 am
Location: Russia

Re: [?+]: Crack of IGE-XAO SEE ELECTRICAL CAD

Post by Gogi66 » Sat Nov 28, 2009 7:23 am

Hi,
See Electrical 3.83 - 4R1 crack keygen.
Link_is_Dead :(/Key.Link_is_Dead :(
(click *Advanced* -for Electrical 3.83 Define custom unlock level – set 159
-for Electrical 4R1 Define custom unlock level – set 6856
thanks.

djcatalyst
Posts: 90
Joined: Sat Feb 21, 2009 3:42 pm
Location: Israel

Re: [?+]: Crack of IGE-XAO SEE ELECTRICAL CAD

Post by djcatalyst » Thu Dec 03, 2009 7:32 am

bsod wrote:for testing...

Download: http://www.ige-xao.com/icons/ige/anglai ... l_v4r1.exe

- install it
-make a Backup of the CAEManager.exe
-open the CAEManager.exe with a Hex-Editor and change the Offset 00089877h from 74 to 75
-check that the value in the offset is 74 before you change !!!
-save the File
-change the Software License to "Hardware Key"
i cant edit this offset because that hex editor cant find this number : 00089877h
ive made exactly what you said but in HEX numbers i didnt find ...
what can i do?

cad22
Posts: 1
Joined: Fri Dec 04, 2009 4:11 pm

Re: [?+]: Crack of IGE-XAO SEE ELECTRICAL CAD

Post by cad22 » Fri Dec 04, 2009 4:14 pm

Gogi66 wrote:Hi,
See Electrical 3.83 - 4R1 crack keygen.
Link_is_Dead :(/Key.Link_is_Dead :(
(click *Advanced* -for Electrical 3.83 Define custom unlock level – set 159
-for Electrical 4R1 Define custom unlock level – set 6856
thanks.
Thank you very much!
How do you obtain the custom unlock level from the software so we can get it for future versions?

Post Reply