[LINK]: Configuration tool for C7-613

[nguyenthacban]

Dear all,
Have some one got the configuration tool for SIMATIC C7-613 please post the setup source code and send me the link of it? i'm realy need it now!
SIMATIC C7-613, CONFIGURATION TOOLS FUER C7-613 ON CD.
http://support.automation.siemens.com/W ... n/18571387
Tons of Thanks!

[Link]

Here you have the configuration cd SIMATIC C7-613 V3.0:
Link_is_Dead :(/s7_C613.zip
or
Link_is_Dead :(/s7_C613.zip
or
http://depositfiles.com/files/ijcka8yov
or
http://www.fayloobmennik.net/2554919

Readme.wri

Show

Contents of the CD:
Electronic Manual "C7 613 Manual" under Manuals
Commissioning, First Steps (Getting Started) "C7 613 Getting Started" under Manuals
Templates for Labelling Strips "SLIDE613" under Manuals
Backplane Labelling "Label613" under Manuals
Library "C7 613" with the required FBs and UDTs
Sample Program "zXX31_01_C7-613" in English for STEP 7
Sample Program "C7_613_Bas_En" and "C7_613_Ext_En" for STEP 7 Lite
Translation tool "T_ToolC7_613" under Translation_Tool_C7_613


2 Software Requirements

To work with C7-613 the configuration software, you require a PC with the following operating systems:
Windows 2000
Windows XP Professional
as well as
the SW package STEP 7 V5.2 with Service Pack 1 (SP1) or later.

To be able to workt with the STEP 7 Lite examples, you have to install:
An installed version of STEP 7 Basis V5.1, Servicepack 4 or higher.
Please refer to the STEP 7 Product Information for information on other software requirements.

[kuiho550]

sir， I'm sorry to bother you. I urgently need the software "configuration tool for C7-613". Since the link you shared before has expired, can you share it again