Request: Modsoft to Unity Pro conversion software(Schneider)

другие контроллеры
Post Reply
marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Request: Modsoft to Unity Pro conversion software(Schneider)

Post by marosy » Fri Dec 28, 2007 9:06 am

Hi folks!

I need to convert a Modsoft ladder logic to Unity Pro.
I need the tool to convert the Modsoft ladder logic. This tool is installed separately, but after installation is part of the Unity Pro software. (It's a kind of add-on to Unity Pro).

Thanks,
Marosy

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Fri Dec 28, 2007 4:13 pm

Try to use old Modsoft Converter (that is a part of Concept) and then import results to Unity Pro.

marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Post by marosy » Sat Dec 29, 2007 10:30 am

Schtiel,

Thanks, but Unity Pro doesn't handle the Concept LL984 ladder logic. It can't convert. I tried what you said.
I suppose the Modsoft to Unity Pro conversion tool is located on the Unity Pro installation CD. (I have only the demo version without the conversion tool.)
So if someone has the official Unity Pro installation CD, It would be really nice to upload the conversion tool to rapidshare.

Regards,
Marosy

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Post by most » Sat Dec 29, 2007 11:15 am


marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Post by marosy » Sat Dec 29, 2007 1:12 pm

Thanks, but I have that exact version of Unity Pro.
It doesn't have the conversion tool.
It could be that the tool is available in a separate kit?

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Sun Dec 30, 2007 9:33 pm

I have an official version of Unity Pro (4 or 5 CDs). I'll look for the required tool after New Year.

marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Post by marosy » Mon Dec 31, 2007 6:22 pm

Schtiel,
Thanks and Happy New Year!

marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Post by marosy » Sun Jan 13, 2008 7:19 am

I'm still looking for the Modsoft to Unity Pro (984LL to Unity) conversion tool. Please help.

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Post by Schtiel » Mon Jan 14, 2008 2:54 pm

There is no conversion dll on Unity 2.3 CDs :-(

I found here that conversion tools you need are available in the new version of Unity - v 3.1:
http://download.telemecanique.com/C1257 ... 000_03.pdf

As for earlier versions - this dll is possibly available upon request to Schneider...

marosy
Posts: 15
Joined: Sat Dec 08, 2007 4:22 pm
Location: Europe

Post by marosy » Tue Jan 15, 2008 3:42 pm

Schtiel,
Thanks for the reply.
I guess in Unity Pro 3.1 it's setup option.
Regards,
Marosy

leofarhan
Posts: 122
Joined: Fri May 01, 2009 8:50 am

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Post by leofarhan » Tue Jan 19, 2010 3:11 pm

Dear Friends,

I also need the ModSoft to Unity Pro Conversion tool, as per previous discussion. I have gone through the Unity Pro V3.1, But didn't found the ModSoft Conversion tool. Unity Pro V3.1 has PL7 to Unity & concept to Unity conversion tool.

I need your help. If you could suggest me the best possible way to convert ModSoft Application to Unity Pro.

Regards

LEO

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Post by most » Wed Jan 20, 2010 1:02 am

leofarhan wrote: also need the ModSoft to Unity Pro Conversion tool,
with unity V4
read this document with attention
http://www.megaupload.com/?d=B0FYYTZ5
.......use the LL984 to Unity Converter directly via the Unity Pro menu File → Open......
try and say if works
Image

leofarhan
Posts: 122
Joined: Fri May 01, 2009 8:50 am

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Post by leofarhan » Wed Jan 20, 2010 7:29 pm

Dear Most,

While conversion of the Applicaition (either from modsoft or ProWorX) I recieved the following errors.


"Conversion of file C\Documents and Settings\Administrator\Desktop\ModSoft_Application.pwx
Converter DLL for this extension not found. Please install it."


Similarly error for ProWorx application.

Then I realize that I have to check Converters in the Option Management.

Further I checked and found that during installation there are two available conveters i.e. Concept & PL7.

Still I can not upgrad my application. If found through some sources that Schneider that Schneider have this conversion tool, and it not for sale, therefore this conversion tool is not available.

Regards

Leo-Ali

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Post by most » Wed Jan 20, 2010 9:35 pm

leofarhan wrote:
While conversion of the Applicaition (either from modsoft or ProWorX) I recieved the following errors.
"Conversion of file C\Documents and Settings\Administrator\Desktop\ModSoft_Application.pwx
Converter DLL for this extension not found. Please install it."

Similarly error for ProWorx application.
olá leofarhan
I only tested with proworx, I think that work well, see the pictures
my program is V4 by http://www.area51warez.info/softwares/3 ... l-v40.html
i not test with hardware

Image
Last edited by most on Thu Jan 21, 2010 11:48 pm, edited 1 time in total.

most
Posts: 431
Joined: Sat Oct 22, 2005 7:17 am
Location: Europe

Re: Request: Modsoft to Unity Pro conversion software(Schneider)

Post by most » Thu Jan 21, 2010 11:46 pm

most wrote:
leofarhan wrote:
While conversion of the Applicaition (either from modsoft or ProWorX) I recieved the following errors.
"Conversion of file C\Documents and Settings\Administrator\Desktop\ModSoft_Application.pwx
Converter DLL for this extension not found. Please install it."

Similarly error for ProWorx application.
for modsoft
I have made some tests, tries in this way
install concept xl 2.6, this program have one tool called Modsoft Convert
open your file *.ENV
save in *.PRJ
Now open another tool Concept Convert
convert your *.prj, another file appears.*.asc
open Unity and open *.asc, also in "tools" open "convert partially" this file *.asc
you see the converter working, but now, I think that it is necessary to configure i/o
I am correct, or not :?:

Post Reply