[LINK]: Flow Calc32 and Festo Fluid

другие контроллеры
Post Reply
azeem_javaid
Posts: 23
Joined: Wed Oct 24, 2007 8:49 am
Location: Saudi Arabia

[LINK]: Flow Calc32 and Festo Fluid

Post by azeem_javaid » Tue Dec 11, 2007 8:01 am

Hye All,

Did any body have Flow calc32 software with serial key or crack ?


Regards

AJC

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Crack Fcalc32

Post by vlad2006gr » Mon Dec 24, 2007 9:57 pm

Link_is_Dead :(/Flowcalc.exe.html
Please replace crack in folder ce.
in Russian wrote:Есть русская программа Расходометр_СТ. Может кому надо.
Good Luck!

zenchek
Posts: 82
Joined: Mon Aug 14, 2006 1:23 pm
Location: Sud America

Crack Fcalc32

Post by zenchek » Tue Dec 25, 2007 8:46 pm

Thank you very much vlad for this post.
zenchek
Last edited by zenchek on Thu Jan 10, 2008 11:42 am, edited 1 time in total.

azeem_javaid
Posts: 23
Joined: Wed Oct 24, 2007 8:49 am
Location: Saudi Arabia

Post by azeem_javaid » Thu Dec 27, 2007 6:32 am

Lot of thanks for this very very usefull help. The crack is fully working with v4.05 ( latest version till date ).
Thanks again. I have many usefull software if you require.

gremlin
Posts: 159
Joined: Fri Aug 10, 2007 10:02 pm
Location: Europe

Post by gremlin » Thu Dec 27, 2007 5:10 pm

you have other software
please give list ?

regards

gremlin

goldenring
Posts: 13
Joined: Mon Mar 12, 2007 3:13 am
Location: India

Post by goldenring » Mon Dec 31, 2007 5:16 pm

Hi,
If you have Festo Fluid Sim Please upload to rapidshare.

Thanks in advance,
Happy New year 2008.

vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Festo Fluid Sim

Post by vlad2006gr » Thu Jan 03, 2008 10:28 am


vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Flowcalc

Post by vlad2006gr » Wed Jan 09, 2008 7:49 am

For activation in Flowcalc compensation please
open Flowcalc.exe in hex editor (winhex),
get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00
Good luck!

zenchek
Posts: 82
Joined: Mon Aug 14, 2006 1:23 pm
Location: Sud America

flowcalc

Post by zenchek » Wed Jan 09, 2008 9:53 pm

Hi vlad
Thank you very much, all work.
zenchek

gremlin
Posts: 159
Joined: Fri Aug 10, 2007 10:02 pm
Location: Europe

Post by gremlin » Sun May 04, 2008 10:02 am

Big thank you to vlad2006gr
thanks
gremlin :D

hitit72
Posts: 1
Joined: Fri Jun 08, 2012 8:10 pm

Re: [LINK]: Flow Calc32 and Festo Fluid

Post by hitit72 » Sun Apr 06, 2014 1:54 pm

link dead.
i used hex editor and cant find the hex numbers for the latest version of flowcalc32.
anybody has crack for the flowcalc32 v5.30?

or flowcalc v4.05 installaion software so that i can use hex editor and i can get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00

thank you for all who will contribute in...

rafidone
Posts: 14
Joined: Mon Jul 12, 2010 1:45 pm

Re: [LINK]: Flow Calc32 and Festo Fluid

Post by rafidone » Fri May 15, 2015 7:54 am

I need Key for Flowcalc32 Version 5.33 key needed. please hlep us in this regards
(h) (pm)
Or some one please share the Licensed version 5.30 which Key is given Above.

Regards
Rafi

rafidone
Posts: 14
Joined: Mon Jul 12, 2010 1:45 pm

Re: [LINK]: Flow Calc32 and Festo Fluid

Post by rafidone » Sat May 16, 2015 8:38 am

Hex Modification is not working please help

(sorry) [dead]
Thanks In advance

Post Reply