Промышленные Логические Контроллеры SIMATIC S7-200/300/400
-
mocho
- Posts: 1
- Joined: Mon Mar 29, 2021 3:36 pm
Post
by mocho » Tue Mar 29, 2022 10:40 am
hello
It is possible traslate this to KOP ? Thank you.
Code: Select all
UN T 0
U E 33.5
S M 10.1
U M 10.1
= A 32.0
UN E 33.1
S M 10.2
U M 10.2
= A 32.1
U M 1.2
O M 100.0
R M 10.2
R M 10.1
UN M 10.1
UN M 10.2
UN M 20.0
UN M 20.1
= A 32.6
U M 20.1
= A 33.4
U M 20.0
= A 32.2
U E 33.2
O E 33.4
O E 32.7
O M 100.0
= A 32.7
U E 32.7
O E 33.4
O E 33.2
UN M 10.0
= M 1.2
U E 32.7
O E 33.4
O E 33.2
= M 10.0
BE
-
Answers to FAQs
- Faq & Info
- Posts: 173
- Joined: Thu Oct 13, 2005 6:42 pm
- Location: Frequently Asked Questions – Часто Задаваемые Вопросы
Post
by Answers to FAQs » Tue Mar 29, 2022 3:03 pm
Code: Select all
// net1
UN T 0
U E 33.5
S M 10.1
// net2
U M 10.1
= A 32.0
// net3
UN E 33.1
S M 10.2
// net4
U M 10.2
= A 32.1
// net5
U M 1.2
O M 100.0
R M 10.2
R M 10.1
// net6
UN M 10.1
UN M 10.2
UN M 20.0
UN M 20.1
= A 32.6
// net7
U M 20.1
= A 33.4
// net8
U M 20.0
= A 32.2
// net9
U E 33.2
O E 33.4
O E 32.7
O M 100.0
= A 32.7
// net10
U E 32.7
O E 33.4
O E 33.2
UN M 10.0
= M 1.2
// net11
U E 32.7
O E 33.4
O E 33.2
= M 10.0
// net12
BE
write all section into separate network & change view awl->kor
-
gtvpic
- Posts: 1
- Joined: Sat Feb 13, 2021 8:57 am
Post
by gtvpic » Tue Mar 29, 2022 5:52 pm
In STEP5 it is not possible in LAD to have more than one coil in the same segment, in the sent code there is more than one coil in the same segment, therefore it is not possible to represent it in LAD
The solution is to copy the code of each of the Coils in a separate segment and place the "NOP 0 " instructions necessary for the STEP5 to perform the conversion from STL to LAD.
Seeing how simple the code is, it is preferable to translate it directly in the STEP5 proprio to KOP instead of copying and revising