Форматирование флеш карты SIMATIC

Промышленные Логические Контроллеры SIMATIC S7-200/300/400
Post Reply
Amfaromah
Posts: 17
Joined: Fri Feb 02, 2018 8:25 am
Location: Вятка

Форматирование флеш карты SIMATIC

Post by Amfaromah » Mon Jun 22, 2020 10:39 am

Доброго времени суток. Имеется флеш карта из плк 1200 с залитой в неё ранее программой. сейчас версия сменилось до 14ой и в неё залить ничего не получается. Флешка вставлена в ПЛК, делаю загрузку пишет Modules with active test and commisioning function can prevent download. Если заливать без флешки, то всё нормально. Вопрос, что сейчас можно сделать с флешкой и как?

CoMod
Site Admin
Posts: 3963
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: Форматирование флеш карты SIMATIC

Post by CoMod » Thu Jun 25, 2020 1:44 pm

(sfaq) https://support.industry.siemens.com/cs ... t/69063974
Restoring the memory card with the S7-1200 CPU
If you restore the memory card with the S7-1200, the program is loaded automatically from the CPU to the memory card.
There is then no longer any program on the CPU.

  • Slot the SIMATIC memory card into an S7-1200 CPU that is switched off.
    Switch on the S7-1200 CPU.
    Wait until the MAINT LED stops flashing.

Post Reply