Page 1 of 1
[LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Thu May 22, 2008 5:15 pm
by Link
Eplan Electric P8 1.9.10
TORRENT
http://rutracker.org/forum/viewtopic.php?t=2044980
or
9 * 100.000.000 + 82.552.768 bytes
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part01.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part02.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part03.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part04.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part05.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part06.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part07.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part08.rar
Link_is_Dead :(/EPLAN_Electric_P8_1_9_10_3725.part09.rar
eplan p8 v1.8 1.9 ALL CRACKS - with support Windows 7 and Vista 64 bits
Link_is_Dead :(/eplan_p8_v1.8_1.9_ALL_CRACK.rar
Size: 26826 KB
=========== OLD ====================
Eplan P8 V1.9.6 Build 3297
3*200.000.000 + 90.662.784
Link_is_Dead :(/Eplan_P8_V1_9_6_Build_3297.part1.zip
Link_is_Dead :(/Eplan_P8_V1_9_6_Build_3297.part2.zip
Link_is_Dead :(/Eplan_P8_V1_9_6_Build_3297.part3.zip
Link_is_Dead :(/Eplan_P8_V1_9_6_Build_3297.part4.zip
Eplan P8 Cabinet V1.9.5
Link_is_Dead :(/EPLAN_Cabinet1_9.part1.zip
Link_is_Dead :(/EPLAN_Cabinet1_9.part2.zip
Link_is_Dead :(/EPLAN_Cabinet1_9.part3.zip
Link_is_Dead :(/EPLAN_Cabinet1_9.part4.zip
Link_is_Dead :(/EPLAN_Cabinet1_9.part5.zip
Link_is_Dead :(/EPLAN_Cabinet1_9.part6.zip
Eplan P8 PPE V1.9.6
Link_is_Dead :(/Eplan_P8_PPE_1.9.6.3297.part1.zip
Link_is_Dead :(/Eplan_P8_PPE_1.9.6.3297.part2.zip
Link_is_Dead :(/Eplan_P8_PPE_1.9.6.3297.part3.zip
Link_is_Dead :(/Eplan_P8_PPE_1.9.6.3297.part4.zip
here is the emule link to eplan electric P8 V1.9.5.3231.
i need the crack for this version. please post it here.
eMule link (about eMule see http://en.wikipedia.org/wiki/Emule )
ed2k://|file|Eplan%20Electric%20P8%20V1.9.5.3231.zip|707522105|A14BFE2537DFD9CCE30AA4E6AC52A75E|h=NPS7FZ44VHYT7TN2HQB26YQWYZU3VOLJ|
EPLAN Fluid Addon 1.9.6:
ed2k://|file|EPLAN%20Fluid%20Addon%201.9.6.rar|30707716|4BEAF6A6E4571E11CE43131E1F52A8B9|h=4UJR4UNCJDGDVC3K5DZLZQ5OVXUUXUCY|/
EPLAN Cabinet 1.9.5
ed2k://|file|EPLAN%20Cabinet%201.9.5.iso|560437248|89AF3938741DF84C5FDC7A3CBA7B62DB|h=FSXA53QJ5U4ELVERYAKSFQJHPJBAWJBS|/
greets
TheDuke
It has some changes and improvements:
http://www.eplan.de/index.php?id=34420&L=1
Posted: Sun May 25, 2008 9:05 pm
by Link
Re: [Link]: Eplan P8 V1.9.5 Build 3231 without crack
Posted: Sun Jun 01, 2008 3:17 pm
by Link
EPLAN Electric P8 1.8.6_DONGLES_Emulator:
http://www.eplan-eb2.ys168.com/
TheDuke
Please send a acting license code and Dongle key of eplan p8 1.9
I can make EPLAN Electric P8 1.95_DONGLES_Emulator
eplan p8 1.8.6 license code and Dongle key :
WUP0U10066
USJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SD2TFFV
WUP0U10337
UPJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7S5AZUFC
WUP0U10225
U9JCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SEVFUFY
eplan p8 1.7 license code and Dongle key :
WUPD0ALDLA
UCJMWTZN5141TH142JJMTR3561E3P71T6R2QX5S3JQM7KG63ZEDNPXATCK4DU1V3T4KUEFBVWPD1D6WE9APT11AG5ECP31JQM7KS5Y3VGPHA22QHDCGHQ8UAVNZUHDM8HKNNG7QC5H2D4Q7BX795W83G
WUPDU10138
UGJMWTNNGNX8RKNNW7QM518ARNEUP23HGM8K35439MYNX3TYRD6WEQ9NQA72BA92SQJEZ6HU8543D4QYTSBNFM
eplan p8 1.9.5 license code and Dongle key :
????????????
Posted: Fri Jul 04, 2008 9:33 am
by chakotay
Wawrzo. wrote:This version using new license, no sn-.epl.
If install generate new license:
C:\Documents and Settings\All Users\Application Data\EPLAN\Common\SN-.EGF
This is not text structure.
new license dll: eplancommon.dll
Wawrzo.
EplanCommon.dll seems to replace the old lclic32.dll.
Old SN-**.EPL now located in ..\EPLAN\Common\SN-**.EGF as a (crunched?) binary.
simultanious Eplan 5.70 sp1 (with modified lclic32.dll, from P8 1.8 ) works fine.
Only for 1.9.5 i need my original dongle.
Posted: Thu Jul 10, 2008 10:21 am
by Link
Please send a acting license code and Dongle key of eplan p8 1.9 ,or C:\Documents and Settings\All Users\Application Data\EPLAN\Common\SN-.EGF file
I can make EPLAN Electric P8 1.95_DONGLES_Emulator
from
http://plc.net.ru/viewtopic.php?t=8465
EPLAN Electric P8 1.9_DONGLES_Emulator with DONGLE image
http://www.eplan-eb2.ys168.com/ (open only with MS IE - not Firefox)
or
03/08/2008 add crack = DONGLES Emulator
Link_is_Dead :(/E ... _crack.rar
or
http://narod.ru/disk/2395946000/EPLAN_E ... s.Link_is_Dead :(
---------------------------------------------------------
EPLAN Electric P8 1.8.6_DONGLES_Emulator:
Internet Explorer LINK :
http://www.eplan-eb.ys168.com/ (open only with MS IE - not Firefox )
Posted: Fri Jul 11, 2008 5:01 pm
by Link
Thanx for Emulator, .
Dumping our original Pro-Dongle, 1.9.5 works fine and without any probs with that.
You can use the HASP Emulator 2007 instead.
The EPLAN Electric P8 Dongles Emulator is a modified Version
without the possibility of dumping your original Aladdin HASP HL.
Don't forget to convert the dumped .BIN into a regular .DNG File (5kB)
All you need is:
1 original dongle for about 10 minutes of dumping and
the hexa-Key (changes with every upcoming eplan version) for this dongle from the eplan service.
after all you have a 100% software dongle with original serials for the hotline... Wink
Link_is_Dead :(/So ... 7-EDGE.rar
Posted: Sun Jul 20, 2008 9:34 pm
by Munroe
flashy wrote:HI all the guys involved with this handy work
Just installed in VMware under XP , and works great,
many thanks to all who helped to make this happen
##~FlashY~##
I have installed the Emulator and all works great,
Best wishes and big thanks to all people that work on this release!!!
MFG Munroe
Posted: Mon Jul 21, 2008 3:48 pm
by most
notricks wrote:i have always the same error:
Error wrote:"Can't load EplanCommon.dll Error: 0"
anyone with same problem?
regards
uninstall the emulators that you possibly tested.
follows the instructions of txt of the emulator.
work OK
in not English wrote:em principio testaste outros emuladores, desinstala tudo inclusive o eplan.
segue as instruções para instalar novamente o emulador.
também tive esse erro quando fazia testes mas com o novo emulador tudo OK
regards
cumprimentos
Posted: Thu Jul 24, 2008 5:08 pm
by TheDuke
Eplan Data Portal comes only with the next version of Eplan P8 (V1.9.6) in august 2008.
greets
TheDuke
Posted: Mon Jul 28, 2008 5:22 pm
by flashy
chemp1 wrote:I have system of Windows XP Professional x64 Edition SP2
and on it EPLAN Electric P8 1.9_DONGLES_Emulator with DONGLE image
does not work. How to struggle with this problem? Help who can!!!
Hi Chemp1
I get round this issue by use Vmware, create a virtual PC for say WinXP and install under that, works great, and plus if you stuff it up in any way
you can always close the window, and revert back to you original desktop
Hope this helps
##~FlashY~##
Posted: Fri Aug 01, 2008 12:01 pm
by stojakovicv
I have installed EPLAN Electric P8 1.9.5 , Build: 3231 and it works fine.
After that I have installed ECabinet 1.8 with crack: eplan_p8_v1.8.4_ALL_CRACK.exe
After that when I start ECabinet it shows message:
I get into the programm and after short time I get this:
License screen from ECabinet is like this:
Please Can anybody tell me how to crack or install Ecabinet 1.8 to work with Eplan 1.9.5.
Or: Is there any link for download ECabinet 1.9
Posted: Sat Aug 02, 2008 11:57 am
by Link
INSTALLATION INSTRUCTIONS
1. Unzip, Unrar and run EPLAN Electric P8 1.9_DONGLES_Emulator.exe
2. Now you need to open "Dricer" tab, Press "INSTALL" button and if
installation was successful Driver
status window will be changed to "Status : driver is installed"
3. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "HASP/HARDLOCK Emulator Service
is running"
4. Open "DONGLES" tab and press the "Load dump" button.Load hl5189.dng
5. Copy SN-U10066.EGF and SN-U10066.000 to C:\Documents and Settings\All Users\Application Data\EPLAN\Common
EPLAN_Electric_P8_1.9_DONGLES_Emulator_NEW2008-08-03:
Link_is_Dead :(/E ... _.Link_is_Dead :(
or
http://narod.ru/disk/1865210000/EPLAN_E ... k.Link_is_Dead :(
from chinese page
http://bbs.e10000.cn/a/a.asp?B=202&ID=557615
Link_is_Dead :(/E ... hinese.rar
or
http://narod.ru/disk/1799436000/EPLAN%2 ... e.Link_is_Dead :(
Posted: Tue Aug 05, 2008 5:42 am
by stojakovicv
stojakovicv wrote:PDLFFALF wrote:INSTALLATION INSTRUCTIONS
No,no,... ECabinet is not working!
Please can anybody do this: run Eplan 1.9.5 and Ecabinet 1.8 with dongle?
I have found the MISTAKE!
Before install ECabinet I need to delete all files SN*.epl from C:\WINDOWS folder.
ECabinet read serial no. from that file and do not want to cooperate with P8 1.9.5 dongle!
After install the ECabinet, I give him licence serial no. from Dongle 1.8.6 txt instruction file:
SN:
WUP0U10066
USJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SD2TFFV
Now it works fine!
I apologize to all because of disturbation!
Posted: Fri Aug 22, 2008 2:17 pm
by gika
hello. i have the same problem like stojakovicv.
i have installed the dongle emulator an works fine. but when i start eplan 5.7 once. the next time will display the same message "error max 40.05"
is it not possible to run p8 and 5.7 on the same system with crack ?
by the way i solve the problem by using a virtual machine. so i can work in the real system with 5.7 and virtual with p8. unfortunatly the virtual machine have not enough performance for fast work with p8.
i tryed the way stajokovicv , but it doesnt work.
can anyone help ?
Posted: Mon Aug 25, 2008 12:58 pm
by Deimos
Hi
No problem with 5.70 and P8 together. Works fine for me.
Thanx for sharing.
Posted: Sat Aug 30, 2008 8:31 am
by croco
chakotay wrote:Thanx for Emulator, PDLFFALF.
Dumping our original Pro-Dongle, 1.9.5 works fine and without any probs with that.
You can use the HASP Emulator 2007 instead.
The EPLAN Electric P8 Dongles Emulator is a modified Version
without the possibility of dumping your original Aladdin HASP HL.
Don't forget to convert the dumped .BIN into a regular .DNG File (5kB)
All you need is:
1 original dongle for about 10 minutes of dumping and
the hexa-Key (changes with every upcoming eplan version) for this dongle from the eplan service.
after all you have a 100% software dongle with original serials for the hotline... Wink
Link_is_Dead :(/So ... 7-EDGE.rar
would you pls repost new link for 'HASP Emulator 2007 instead' because is abused by RS
Thanks
Posted: Thu Sep 04, 2008 1:39 pm
by chakotay
maybe you can try this and the hardlock:
Link_is_Dead :(/vusb_xp64.rar
or
http://narod.ru/disk/3208554000/vusb_xp64.Link_is_Dead :(
some good news:
Eplan 1.9.6 HF 2 uses same License Management as 1.9.5.
Old dump is working...
bad one:
Dataportal Server needs email username/company for operating.
Eplan Electric P8 v1.9.5 Error?
Posted: Fri Sep 12, 2008 2:56 pm
by van8x10
'Insert Symbol' does not work?
Who's ever met with this case please help!
Posted: Sat Oct 04, 2008 9:04 am
by vaiduakhu
Eplan Electric P8 v1.9.5.3231 Multilanguage ISO | 680 MB
EPLAN Electric P8 is proven to help increase quality, reduce cost and bring products to market faster whenever and wherever electrical controls design is an important part of a business.
EPLAN Electric P8 is the ultimate flexible solution for global controls design engineering. It’s highly innovative and user friendly. In fact, EPLAN Electric P8 is so much more that to better describe what makes it different, superior and ahead of its time, perhaps we should mention what it’s not.
EPLAN Electric P8 is not a drafting package. With EPLAN Electric P8, you will eliminate, repetitive, unproductive, mundane and tedious manual work associated with traditional drafting packages. No more spending valuable time on wire numbering, device naming, cross referencing, checking for errors and creating bill of materials and wire lists. Instead, you’ll get to focus your full attention on design engineering to meet critical deadlines and fulfill high accuracy and quality expectations.
EPLAN Electric P8 is not a collection of home grown add-ons and scripts that runs on top of an inferior package. EPLAN Electric P8 is a native program, which means it is the only software you’ll need for creating comprehensive electrical controls system designs. This does not mean that it’s isolated. On the contrary, EPLAN Electric P8 has advanced interoperability capabilities to leverage your work in other disciplines such as manufacturing, purchasing, panel build, equipment build, etc.
http://www.filefactory.com/file/938f34/ ... _part1_rar
http://www.filefactory.com/file/13ba22/ ... _part2_rar
http://www.filefactory.com/file/2acbd2/ ... _part3_rar
http://www.filefactory.com/file/200959/ ... _part4_rar
http://www.filefactory.com/file/c1bc0d/ ... _part5_rar
http://www.filefactory.com/file/5c7192/ ... _part6_rar
http://www.filefactory.com/file/f82489/ ... _part7_rar
Posted: Sat Oct 04, 2008 3:01 pm
by farshad4017
chakotay wrote:maybe you can try this and the hardlock:
Link_is_Dead :(/vusb_xp64.Link_is_Dead :(
some good news:
Eplan 1.9.6 HF 2 uses same License Management as 1.9.5.
Old dump is working...
bad one:
Dataportal Server needs email username/company for operating.
after installing I have some problems !!!!
please see this pictures:
thanks
Posted: Sat Oct 04, 2008 5:21 pm
by Link
Hi
Do you have Eplan 1.9.6.?
Can you upload somewhere?.
About this error - you received becouse in first time you didn't make everythink step by step.
To fixed this must delete all files in folder License and after that start the procedure again.
not sure about name of this folder.
This is folder where write license file.
Try and tommorow I'll post exactly information about this "error".
Follow this procedure
Link_is_Dead :(/E ... _crack.rar
regards
Posted: Tue Oct 07, 2008 10:40 pm
by dsekulic
Hi farshad4017,
If you use EPLAN Electric P8 1.9_DONGLES_Emulator.exe you porbably miss to check automatic start on Driver startup option in 'Driver' tab and than 'Save State'. But first in Emulator tab press 'Start Service'.
regards
Posted: Wed Oct 08, 2008 4:39 pm
by TheDuke
eando wrote:Hi all,
Do anybody here knows how to convert a *.bin file that I managed to extract with the HArdlock Emulator (under the tab "Dumper") to the extension *.dng ? Do anybody have a link for downloading the software tool I need for this?
I somehow got to do it untill certain point but got an error message saying something about " Wrong file size"
Thanks in advance
Hi eando,
what you need is here inside:
Link_is_Dead :(/So ... 7-EDGE.rar
you need for dump and convert the same Version (2007) of Emulator and EDGE.
greets
TheDuke
Posted: Sat Oct 11, 2008 10:03 am
by Schtiel
TheDuke wrote:Eplan Data Portal comes only with the next version of Eplan P8 (V1.9.6) in august 2008.
viewtopic.php?p=21469#21469
Posted: Wed Oct 15, 2008 4:51 am
by croco
TheDuke wrote:Hi eando,
what you need is here inside:
Link_is_Dead :(/So ... 7-EDGE.rar
you need for dump and convert the same Version (2007) of Emulator and EDGE.
greets
TheDuke
Hi TheDuke,
maybe I should get up earlier ...
the link is down again.
would you please upload again?
Thanks, croco
Posted: Wed Mar 11, 2009 10:31 am
by pconline
Link_is_Dead :(/epln.Link_is_Dead :(
MD5: 0D74BC1D6AC216CFA5F3D8159B62EF63
password is: plc.gen.tr
Posted: Thu Mar 12, 2009 6:53 pm
by kaffeemuehle
Hello,
can somebody tell me whether EPLAN Fluid 1.8.4 runs under EPLAN P8_V1.9.6_Build_3297?
Posted: Wed Mar 25, 2009 10:19 am
by Link
croco wrote:... please upload again ...
SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE
Link_is_Dead :(/dngemu.rar
(The file pconline posted contains almost all known working eplan cracks, but doesn't contain this. The tools in that archive can only emulate a dongle, but can't dump one, like the EDGE-HASP app.)
Posted: Mon Aug 03, 2009 2:32 pm
by Garog
i have a dump from my original hardlock and the new activation code.
its working fine with the emu
Re: [LINK]: Eplan P8 V1.9.5 Build 3231 + crack
Posted: Thu Oct 29, 2009 6:51 am
by gika
hi guys.
i have a problem with creating dongle dump with hasp hl 2007 application.
i can read my dongle code and creating the dump file is sucessfull, but output format isn´t´*.DMP extension.
when i do the steps which are discribed in the manual ive got a *.BIN file ? is this incorrect or what i have to do with them ?
please help.
Re: [LINK]: Eplan P8 V1.9.5 Build 3231 + crack
Posted: Thu Oct 29, 2009 4:00 pm
by TheDuke
hi,
*.BIN is the correct file format.
You must use the "HASP HL" tab in the edgehasp.exe to generate a *.dng file.
greets
TheDuke
Re: EPLAN_Electric_P8 Emulator(2009-11-11).rar
Posted: Thu Nov 12, 2009 4:37 am
by PDLFFALF
EPLAN_Electric_P8 Emulator(2009-11-11).rar
http://www.eplan-eb2.ys168.com (Internet Explorer only - not Mozilla)
or
Link_is_Dead :(/E ... _11_11.rar
Size: 11 KB
Re: [LINK]: Eplan P8 V1.9.5 Build 3231 + crack
Posted: Sat Nov 14, 2009 8:06 am
by gregar
gregar wrote:What versions of EPLAN P8 can use this emulator?
How to properly apply?
Try with EPLAN Electric P8 1.9.10.3725 (EPLAN Electric P8 1.9 International SP1).
Works fine.
works also for PPE
Re: [LINK]: Eplan P8 V1.9.5 Build 3231 + crack
Posted: Tue Dec 29, 2009 7:18 am
by phamxba
dear guy
Could you show me the way to emulator that's one for 1.9.10 Eplan. I try many way but not jet working.
Thanks advance
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sun Mar 07, 2010 7:36 am
by zart
It is work for me.Get a keys serial for Cabinet,copy them to \Documents and Settings\All User\Application Data\Eplan\Common\....but do not owerwright ,rename them.Thats All.
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Mon Mar 08, 2010 9:32 pm
by zart
The keys is inside at forum"Eplan P8 V1.9.6 Build 3297 You can give any name to serial files you want,for example "SN-U100661.EGF","SN-U10066.0001". Good lack.
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sun Mar 14, 2010 5:35 am
by pinkerton
Hi All,
when I opened Cabinet V1.9 then software asked for ODBC data source. I try to use ESS.dsn or create new file but it did not work.
Anybody help or please advise me. Thank you in advance
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Thu Apr 22, 2010 6:39 am
by Coyote
Hi all,
It works for me Eplan Electric P8 1.9.10 with EPLAN_Electric_P8 Emulator(2009-11-11). But I have a problem:
I am trying to import EPLAN5 macro: Project->EPLAN 5/fluidPLAN data import->macro... I can't select Master data drive and Source file.
I am searching for macro for S7-200 ( I need CPU224 DC/DC/DC and EM231RTD), but it is impossible to find anything. Could somebody share macros for S7-200?
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Mon May 10, 2010 12:24 pm
by af.naderi
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Tue May 11, 2010 4:42 am
by PDLFFALF
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Thu May 13, 2010 6:47 pm
by jerry
please for all ,help
i have eplan 1.9.11,
after emulate the dngle, when i open the program some windows appear and ask me to set the new validation code of eplan.
the message i have is:
your licence is not yet activated for the version evailable.
where can i get the validation code for this version?
help help help
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Tue Sep 28, 2010 2:19 pm
by Violator
With this crack:
Code: Select all
eplan p8 v1.8 1.9 ALL CRACKS - with support Windows 7 and Vista 64 bits
Link_is_Dead :(/eplan_p8_v1.8_1.9_ALL_CRACK.rar
Size: 26826 KB
Everything works fine on Windows 7 64bit Ultimate.
With P8 Professional you can do anything you like.
Also 5.70 Professional works on Windows 7 64bit Ultimate but if you want to print something it always has the watermark "Schulversion, edizione scolastica, school version, edition d'ecole". Does somebody nows how to fix this?
Thanx
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sat Dec 11, 2010 1:48 am
by Only2006
Hi all
for some strange reason this file
Link_is_Dead :( ... _CRACK.rar
... the one with support Windows 7 and Vista 64 bits,
is corrupted or not completely downloadable(it stops near the last bits of download)
(i tried many times in many ways)
pls can someone who have it send me a different link for it, or tell wherever else i can find this file?
many thx
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Wed Sep 14, 2011 4:58 pm
by Shah_rs125
hi all,
Anyone know how to install eplan P8 1.9.11
i have download 6 zip file for this version
but don;t know how to install it
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sat Oct 01, 2011 11:13 am
by lable
Hi All ,
I lost the Dongle of my EPLAN P8 1.9 international HF1 , can any one hepl me out how to get it work. Is there any validatuion/crack available.
Plz help me pou.
Thanks & rgds,
Lable.
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sat Oct 08, 2011 7:05 pm
by sadefa
hm ... lost dongle = new dongle
btw. the dongle is not for specific version, but for a specific product ... eplan, elcad or whatever
try this
http://www.filesonic.com/file/2216098681
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Tue Jan 10, 2012 1:49 pm
by Shah_rs125
hi all,
Anyone know how to install eplan P8 1.9.11
i have download 6 zip file for this version
but don;t know how to install it
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Sat Sep 22, 2012 1:56 am
by fabionenez
hi all,
Anyone know how to install eplan P8 2.1 in win xp.
I have crack and Eplan Electric P8 2.0 DONGLES Emulator, but I haven't the instructions.
Alternatively where can I download a running software?
Re: [LINK]: Eplan P8 V1.9.10 and Cabinet V1.9.5
Posted: Mon May 11, 2015 8:13 am
by aldarin
Hi all,
Link_is_Dead :( ... _CRACK.rar
rapidshare is down.Anyone have another link for this file..?