plcforum.uz.ua

International PLC Forum
It is currently Sun Oct 26, 2014 11:26 am

All times are UTC + 3 hours




Post new topic Reply to topic  [ 49 posts ] 
Author Message
PostPosted: Thu May 22, 2008 8:15 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Eplan Electric P8 1.9.10
TORRENT http://rutracker.org/forum/viewtopic.php?t=2044980
or
9 * 100.000.000 + 82.552.768 bytes
http://rapidshare.com/files/333155974/EPLAN_Electric_P8_1_9_10_3725.part01.rar
http://rapidshare.com/files/333156444/EPLAN_Electric_P8_1_9_10_3725.part02.rar
http://rapidshare.com/files/333157133/EPLAN_Electric_P8_1_9_10_3725.part03.rar
http://rapidshare.com/files/333158346/EPLAN_Electric_P8_1_9_10_3725.part04.rar
http://rapidshare.com/files/333158646/EPLAN_Electric_P8_1_9_10_3725.part05.rar
http://rapidshare.com/files/333159796/EPLAN_Electric_P8_1_9_10_3725.part06.rar
http://rapidshare.com/files/333159748/EPLAN_Electric_P8_1_9_10_3725.part07.rar
http://rapidshare.com/files/333160540/EPLAN_Electric_P8_1_9_10_3725.part08.rar
http://rapidshare.com/files/333161260/EPLAN_Electric_P8_1_9_10_3725.part09.rar

eplan p8 v1.8 1.9 ALL CRACKS - with support Windows 7 and Vista 64 bits
http://rapidshare.com/files/333166681/eplan_p8_v1.8_1.9_ALL_CRACK.rar
Size: 26826 KB

=========== OLD ====================

Eplan P8 V1.9.6 Build 3297
3*200.000.000 + 90.662.784
http://rapidshare.com/files/333108771/Eplan_P8_V1_9_6_Build_3297.part1.zip
http://rapidshare.com/files/333108699/Eplan_P8_V1_9_6_Build_3297.part2.zip
http://rapidshare.com/files/333108627/Eplan_P8_V1_9_6_Build_3297.part3.zip
http://rapidshare.com/files/333106812/Eplan_P8_V1_9_6_Build_3297.part4.zip

Eplan P8 Cabinet V1.9.5
http://rapidshare.com/files/333111875/EPLAN_Cabinet1_9.part1.zip
http://rapidshare.com/files/333111946/EPLAN_Cabinet1_9.part2.zip
http://rapidshare.com/files/333112071/EPLAN_Cabinet1_9.part3.zip
http://rapidshare.com/files/333112087/EPLAN_Cabinet1_9.part4.zip
http://rapidshare.com/files/333112288/EPLAN_Cabinet1_9.part5.zip
http://rapidshare.com/files/333110544/EPLAN_Cabinet1_9.part6.zip

Eplan P8 PPE V1.9.6
http://rapidshare.com/files/333108580/Eplan_P8_PPE_1.9.6.3297.part1.zip
http://rapidshare.com/files/333108582/Eplan_P8_PPE_1.9.6.3297.part2.zip
http://rapidshare.com/files/333108678/Eplan_P8_PPE_1.9.6.3297.part3.zip
http://rapidshare.com/files/333108530/Eplan_P8_PPE_1.9.6.3297.part4.zip

here is the emule link to eplan electric P8 V1.9.5.3231.

i need the crack for this version. please post it here.

eMule link (about eMule see http://en.wikipedia.org/wiki/Emule )
Image
ed2k://|file|Eplan%20Electric%20P8%20V1.9.5.3231.zip|707522105|A14BFE2537DFD9CCE30AA4E6AC52A75E|h=NPS7FZ44VHYT7TN2HQB26YQWYZU3VOLJ|


EPLAN Fluid Addon 1.9.6:

ed2k://|file|EPLAN%20Fluid%20Addon%201.9.6.rar|30707716|4BEAF6A6E4571E11CE43131E1F52A8B9|h=4UJR4UNCJDGDVC3K5DZLZQ5OVXUUXUCY|/


EPLAN Cabinet 1.9.5
ed2k://|file|EPLAN%20Cabinet%201.9.5.iso|560437248|89AF3938741DF84C5FDC7A3CBA7B62DB|h=FSXA53QJ5U4ELVERYAKSFQJHPJBAWJBS|/

greets
TheDuke

It has some changes and improvements:
http://www.eplan.de/index.php?id=34420&L=1


Top
 Profile  
 
 Post subject:
PostPosted: Mon May 26, 2008 12:05 am 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
thanks to TheDuke for share

Product: EPLAN Electric P8 1.9.5
Build: 3231
7 x 80 000 000 + 62 291 656
Image
old RAR inside ZIP
http://rapidshare.com/files/172972215/E ... part01.zip
http://rapidshare.com/files/172977239/E ... part02.zip
http://rapidshare.com/files/172982637/E ... part03.zip
http://rapidshare.com/files/172988859/E ... part04.zip
http://rapidshare.com/files/172996975/E ... part05.zip
http://rapidshare.com/files/173003440/E ... part06.zip
http://rapidshare.com/files/173008636/E ... part07.zip
http://rapidshare.com/files/172967661/E ... part08.zip

03/08/2008 add crack = DONGLES Emulator
http://rapidshare.com/files/173011231/E ... cracks.rar

regards


Last edited by most on Sun Jul 20, 2008 8:08 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun Jun 01, 2008 6:17 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
EPLAN Electric P8 1.8.6_DONGLES_Emulator:

http://www.eplan-eb2.ys168.com/


TheDuke

Please send a acting license code and Dongle key of eplan p8 1.9
I can make EPLAN Electric P8 1.95_DONGLES_Emulator

eplan p8 1.8.6 license code and Dongle key :
WUP0U10066
USJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SD2TFFV

WUP0U10337
UPJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7S5AZUFC

WUP0U10225
U9JCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SEVFUFY

eplan p8 1.7 license code and Dongle key :

WUPD0ALDLA
UCJMWTZN5141TH142JJMTR3561E3P71T6R2QX5S3JQM7KG63ZEDNPXATCK4DU1V3T4KUEFBVWPD1D6WE9APT11AG5ECP31JQM7KS5Y3VGPHA22QHDCGHQ8UAVNZUHDM8HKNNG7QC5H2D4Q7BX795W83G

WUPDU10138
UGJMWTNNGNX8RKNNW7QM518ARNEUP23HGM8K35439MYNX3TYRD6WEQ9NQA72BA92SQJEZ6HU8543D4QYTSBNFM



eplan p8 1.9.5 license code and Dongle key :
????????????


Last edited by PDLFFALF on Wed Jan 07, 2009 6:07 pm, edited 4 times in total.

Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 04, 2008 12:33 pm 

Joined: Tue Jun 17, 2008 8:29 am
Posts: 6
Location: Europe
Wawrzo. wrote:
This version using new license, no sn-.epl.
If install generate new license:
C:\Documents and Settings\All Users\Application Data\EPLAN\Common\SN-.EGF
This is not text structure.
new license dll: eplancommon.dll
Wawrzo.

EplanCommon.dll seems to replace the old lclic32.dll.

Old SN-**.EPL now located in ..\EPLAN\Common\SN-**.EGF as a (crunched?) binary.
simultanious Eplan 5.70 sp1 (with modified lclic32.dll, from P8 1.8 ) works fine.
Only for 1.9.5 i need my original dongle. :evil:


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 10, 2008 1:21 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Quote:
Please send a acting license code and Dongle key of eplan p8 1.9 ,or C:\Documents and Settings\All Users\Application Data\EPLAN\Common\SN-.EGF file
I can make EPLAN Electric P8 1.95_DONGLES_Emulator

from http://plc.net.ru/viewtopic.php?t=8465

EPLAN Electric P8 1.9_DONGLES_Emulator with DONGLE image

http://www.eplan-eb2.ys168.com/ (open only with MS IE - not Firefox)

or
03/08/2008 add crack = DONGLES Emulator
http://rapidshare.com/files/142366853/EPLAN_Electric_P8_1.8.6_1.9_DONGLES_Emulators_and_crack.rar
or
http://narod.ru/disk/2395946000/EPLAN_Electric_P8_1.8.6_1.9_DONGLES_Emulators_and_cracks.rar.html


---------------------------------------------------------
EPLAN Electric P8 1.8.6_DONGLES_Emulator:


Internet Explorer LINK :

http://www.eplan-eb.ys168.com/ (open only with MS IE - not Firefox )


Last edited by PDLFFALF on Wed Jan 07, 2009 6:08 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Fri Jul 11, 2008 8:01 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Thanx for Emulator, .
Dumping our original Pro-Dongle, 1.9.5 works fine and without any probs with that.


You can use the HASP Emulator 2007 instead.

The EPLAN Electric P8 Dongles Emulator is a modified Version
without the possibility of dumping your original Aladdin HASP HL.

Don't forget to convert the dumped .BIN into a regular .DNG File (5kB)

All you need is:
1 original dongle for about 10 minutes of dumping and
the hexa-Key (changes with every upcoming eplan version) for this dongle from the eplan service.

after all you have a 100% software dongle with original serials for the hotline... Wink

http://rapidshare.com/files/62658973/SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE.rar


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 21, 2008 12:34 am 

Joined: Tue Oct 30, 2007 10:59 pm
Posts: 19
Location: Europe
flashy wrote:
HI all the guys involved with this handy work

Just installed in VMware under XP , and works great,
many thanks to all who helped to make this happen

##~FlashY~## 8) :lol: 8)

I have installed the Emulator and all works great,

Best wishes and big thanks to all people that work on this release!!!

MFG Munroe


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 21, 2008 6:48 pm 

Joined: Sat Oct 22, 2005 10:17 am
Posts: 431
Location: Europe
notricks wrote:
i have always the same error:

Error wrote:
"Can't load EplanCommon.dll Error: 0"


anyone with same problem?

regards

uninstall the emulators that you possibly tested.
follows the instructions of txt of the emulator.
work OK

in not English wrote:
em principio testaste outros emuladores, desinstala tudo inclusive o eplan.
segue as instruções para instalar novamente o emulador.
também tive esse erro quando fazia testes mas com o novo emulador tudo OK


regards
cumprimentos


Last edited by most on Mon Jul 21, 2008 8:11 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 24, 2008 8:08 pm 

Joined: Thu May 22, 2008 8:08 pm
Posts: 19
Location: Europe
chemp1 wrote:
Hello all!
I have a question.
I have installed EPLAN P8 1.9 Build: 3231 all works well, but I have not found "EPLAN Data Portal".
About it it is written here
http://www.eplan.de/index.php?id=39155&L=1
with demo video http://www.eplan-russia.ru/fileadmin/da ... Portal.wmv

in Russian wrote:
Не нашёл опции пополнения базы компонентов описанной здесь
http://www.eplan-russia.ru/index.php?id=45473


Me interests why it is not present and where it to take???
Respond who knows please....

Image

Eplan Data Portal comes only with the next version of Eplan P8 (V1.9.6) in august 2008.

greets
TheDuke


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 28, 2008 8:22 pm 

Joined: Sun Apr 02, 2006 11:09 pm
Posts: 55
Location: Europe
chemp1 wrote:
I have system of Windows XP Professional x64 Edition SP2
and on it EPLAN Electric P8 1.9_DONGLES_Emulator with DONGLE image
does not work. How to struggle with this problem? Help who can!!!

Hi Chemp1

I get round this issue by use Vmware, create a virtual PC for say WinXP and install under that, works great, and plus if you stuff it up in any way
you can always close the window, and revert back to you original desktop


Hope this helps

##~FlashY~## 8) :lol: 8)


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 01, 2008 3:01 pm 

Joined: Thu Aug 10, 2006 4:53 pm
Posts: 9
Location: Serbia and Montenegro
I have installed EPLAN Electric P8 1.9.5 , Build: 3231 and it works fine.

After that I have installed ECabinet 1.8 with crack: eplan_p8_v1.8.4_ALL_CRACK.exe

After that when I start ECabinet it shows message:

Image

I get into the programm and after short time I get this:

Image


License screen from ECabinet is like this:

Image

Please Can anybody tell me how to crack or install Ecabinet 1.8 to work with Eplan 1.9.5.



Or: Is there any link for download ECabinet 1.9


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 02, 2008 2:57 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
INSTALLATION INSTRUCTIONS

1. Unzip, Unrar and run EPLAN Electric P8 1.9_DONGLES_Emulator.exe

2. Now you need to open "Dricer" tab, Press "INSTALL" button and if
installation was successful Driver
status window will be changed to "Status : driver is installed"

3. Now you need to open "Emulator" tab, Then you press "Start Service"
button. If everything is ok you'll see "HASP/HARDLOCK Emulator Service
is running"


4. Open "DONGLES" tab and press the "Load dump" button.Load hl5189.dng


5. Copy SN-U10066.EGF and SN-U10066.000 to C:\Documents and Settings\All Users\Application Data\EPLAN\Common


EPLAN_Electric_P8_1.9_DONGLES_Emulator_NEW2008-08-03:

http://rapidshare.com/files/134379347/EPLAN_Electric_P8_1.9_DONGLES_Emulator_NEW2008-08-03_.rar.html
or
http://narod.ru/disk/1865210000/EPLAN_Electric_P8_1.8.6_1.9_DONGLES_Emulators_and_crack.rar.html


from chinese page
http://bbs.e10000.cn/a/a.asp?B=202&ID=557615

Image

Image http://rapidshare.com/files/134337522/E ... hinese.rar
or Image http://narod.ru/disk/1799436000/EPLAN%2 ... e.rar.html


Last edited by PDLFFALF on Sat Aug 02, 2008 10:33 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject:
PostPosted: Tue Aug 05, 2008 8:42 am 

Joined: Thu Aug 10, 2006 4:53 pm
Posts: 9
Location: Serbia and Montenegro
stojakovicv wrote:
PDLFFALF wrote:
INSTALLATION INSTRUCTIONS



No,no,... ECabinet is not working!

Please can anybody do this: run Eplan 1.9.5 and Ecabinet 1.8 with dongle?

I have found the MISTAKE!

Before install ECabinet I need to delete all files SN*.epl from C:\WINDOWS folder.

ECabinet read serial no. from that file and do not want to cooperate with P8 1.9.5 dongle!

After install the ECabinet, I give him licence serial no. from Dongle 1.8.6 txt instruction file:

SN:

WUP0U10066
USJCCQHY2WHE8N6JECAHC24GX8Z3H48UAVNZUHWXXKVP35XMWZ6HDCGHQ2NG72CXHS2BQX7ZSHY7CRS1J1MRRQ5NSJ9MP31QG2EBPV3A68DKQ5637AP53MA18KMY8X1TKR65YSXXTSKBEUJV6TUKFDW89PP81R6DDEQPA38G8NQX5S176MNKBFGA82BA92SQJEZ6HF2WRQ2NBJ9M543E6A7CCHRC84SYSW7SD2TFFV


Now it works fine!

I apologize to all because of disturbation!


Top
 Profile  
 
 Post subject:
PostPosted: Fri Aug 22, 2008 5:17 pm 

Joined: Thu Jul 10, 2008 12:56 pm
Posts: 10
Location: Europe
hello. i have the same problem like stojakovicv.

i have installed the dongle emulator an works fine. but when i start eplan 5.7 once. the next time will display the same message "error max 40.05"

is it not possible to run p8 and 5.7 on the same system with crack ?

by the way i solve the problem by using a virtual machine. so i can work in the real system with 5.7 and virtual with p8. unfortunatly the virtual machine have not enough performance for fast work with p8.

i tryed the way stajokovicv , but it doesnt work.

can anyone help ?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 25, 2008 3:58 pm 

Joined: Fri Jul 06, 2007 5:56 pm
Posts: 8
Location: Germany
Hi
No problem with 5.70 and P8 together. Works fine for me.
Thanx for sharing.


Top
 Profile  
 
 Post subject:
PostPosted: Sat Aug 30, 2008 11:31 am 

Joined: Tue Jul 22, 2008 11:01 am
Posts: 16
Location: Europe
chakotay wrote:
Thanx for Emulator, PDLFFALF.
Dumping our original Pro-Dongle, 1.9.5 works fine and without any probs with that.


You can use the HASP Emulator 2007 instead.

The EPLAN Electric P8 Dongles Emulator is a modified Version
without the possibility of dumping your original Aladdin HASP HL.

Don't forget to convert the dumped .BIN into a regular .DNG File (5kB)

All you need is:
1 original dongle for about 10 minutes of dumping and
the hexa-Key (changes with every upcoming eplan version) for this dongle from the eplan service.

after all you have a 100% software dongle with original serials for the hotline... Wink

http://rapidshare.com/files/62658973/So ... 7-EDGE.rar


would you pls repost new link for 'HASP Emulator 2007 instead' because is abused by RS

Thanks


Top
 Profile  
 
 Post subject:
PostPosted: Mon Sep 01, 2008 3:16 pm 

Joined: Thu Aug 28, 2008 10:59 pm
Posts: 2
Location: Europe
On Vista 32bit Eplan 1.9.5 is running without any Problems. But on Vista 64bit the Dongle emulator doesn't work. Is there any possibility to run the Dongle emulator on 64bit? Or does anybody have an other one?

Greetz lollipop


Top
 Profile  
 
 Post subject:
PostPosted: Thu Sep 04, 2008 4:39 pm 

Joined: Tue Jun 17, 2008 8:29 am
Posts: 6
Location: Europe
maybe you can try this and the hardlock: http://rapidshare.com/files/154298097/vusb_xp64.rar
or
http://narod.ru/disk/3208554000/vusb_xp64.rar.html

some good news:
Eplan 1.9.6 HF 2 uses same License Management as 1.9.5.
Old dump is working... :lol:

bad one:
Dataportal Server needs email username/company for operating.


Top
 Profile  
 
PostPosted: Fri Sep 12, 2008 5:56 pm 

Joined: Thu Sep 06, 2007 1:58 pm
Posts: 62
Location: Vietnam
'Insert Symbol' does not work?
Image
Who's ever met with this case please help!


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 12:04 pm 

Joined: Thu Jun 14, 2007 8:21 pm
Posts: 77
Location: Asia
Eplan Electric P8 v1.9.5.3231 Multilanguage ISO | 680 MB

EPLAN Electric P8 is proven to help increase quality, reduce cost and bring products to market faster whenever and wherever electrical controls design is an important part of a business.

EPLAN Electric P8 is the ultimate flexible solution for global controls design engineering. It’s highly innovative and user friendly. In fact, EPLAN Electric P8 is so much more that to better describe what makes it different, superior and ahead of its time, perhaps we should mention what it’s not.

EPLAN Electric P8 is not a drafting package. With EPLAN Electric P8, you will eliminate, repetitive, unproductive, mundane and tedious manual work associated with traditional drafting packages. No more spending valuable time on wire numbering, device naming, cross referencing, checking for errors and creating bill of materials and wire lists. Instead, you’ll get to focus your full attention on design engineering to meet critical deadlines and fulfill high accuracy and quality expectations.

EPLAN Electric P8 is not a collection of home grown add-ons and scripts that runs on top of an inferior package. EPLAN Electric P8 is a native program, which means it is the only software you’ll need for creating comprehensive electrical controls system designs. This does not mean that it’s isolated. On the contrary, EPLAN Electric P8 has advanced interoperability capabilities to leverage your work in other disciplines such as manufacturing, purchasing, panel build, equipment build, etc.

http://www.filefactory.com/file/938f34/n/EE_P8_v1_9_5_3231_pm_part1_rar
http://www.filefactory.com/file/13ba22/n/EE_P8_v1_9_5_3231_pm_part2_rar
http://www.filefactory.com/file/2acbd2/n/EE_P8_v1_9_5_3231_pm_part3_rar
http://www.filefactory.com/file/200959/n/EE_P8_v1_9_5_3231_pm_part4_rar
http://www.filefactory.com/file/c1bc0d/n/EE_P8_v1_9_5_3231_pm_part5_rar
http://www.filefactory.com/file/5c7192/n/EE_P8_v1_9_5_3231_pm_part6_rar
http://www.filefactory.com/file/f82489/n/EE_P8_v1_9_5_3231_pm_part7_rar


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 6:01 pm 

Joined: Thu Nov 15, 2007 7:04 pm
Posts: 38
Location: Iran
chakotay wrote:
maybe you can try this and the hardlock: http://rapidshare.com/files/85574768/vusb_xp64.rar.html

some good news:
Eplan 1.9.6 HF 2 uses same License Management as 1.9.5.
Old dump is working... :lol:

bad one:
Dataportal Server needs email username/company for operating.


after installing I have some problems !!!!
please see this pictures:
Image
Image
Image

thanks


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 04, 2008 8:21 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
Hi

Do you have Eplan 1.9.6.?
Can you upload somewhere?.

About this error - you received becouse in first time you didn't make everythink step by step.
To fixed this must delete all files in folder License and after that start the procedure again.
not sure about name of this folder.
This is folder where write license file.
Try and tommorow I'll post exactly information about this "error".
Follow this procedure
http://rapidshare.com/files/142366853/EPLAN_Electric_P8_1.8.6_1.9_DONGLES_Emulators_and_crack.rar


regards


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 08, 2008 1:40 am 

Joined: Sun Feb 12, 2006 8:47 pm
Posts: 164
Location: Europe
Hi farshad4017,

If you use EPLAN Electric P8 1.9_DONGLES_Emulator.exe you porbably miss to check automatic start on Driver startup option in 'Driver' tab and than 'Save State'. But first in Emulator tab press 'Start Service'.

regards


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 08, 2008 7:39 pm 

Joined: Thu May 22, 2008 8:08 pm
Posts: 19
Location: Europe
eando wrote:
Hi all,
Do anybody here knows how to convert a *.bin file that I managed to extract with the HArdlock Emulator (under the tab "Dumper") to the extension *.dng ? Do anybody have a link for downloading the software tool I need for this?

I somehow got to do it untill certain point but got an error message saying something about " Wrong file size"

Thanks in advance
Hi eando,

what you need is here inside:
http://rapidshare.com/files/62658973/SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE.rar

you need for dump and convert the same Version (2007) of Emulator and EDGE.

greets
TheDuke


Top
 Profile  
 
 Post subject:
PostPosted: Sat Oct 11, 2008 1:03 pm 
Site Admin

Joined: Wed Sep 06, 2006 3:03 pm
Posts: 968
Location: CIS
TheDuke wrote:
Eplan Data Portal comes only with the next version of Eplan P8 (V1.9.6) in august 2008.

viewtopic.php?p=21469#21469


Top
 Profile  
 
 Post subject:
PostPosted: Wed Oct 15, 2008 7:51 am 

Joined: Tue Jul 22, 2008 11:01 am
Posts: 16
Location: Europe
TheDuke wrote:
Hi eando,

what you need is here inside:
http://rapidshare.com/files/62658973/SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE.rar

you need for dump and convert the same Version (2007) of Emulator and EDGE.

greets
TheDuke


Hi TheDuke,

maybe I should get up earlier ...
the link is down again.
would you please upload again?

Thanks, croco


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 11, 2009 1:31 pm 

Joined: Wed Mar 11, 2009 1:29 pm
Posts: 23
Location: TURKIYE
http://rapidshare.com/files/207885445/epln.rar.html
MD5: 0D74BC1D6AC216CFA5F3D8159B62EF63

password is: plc.gen.tr


Top
 Profile  
 
 Post subject:
PostPosted: Thu Mar 12, 2009 9:53 pm 

Joined: Mon Nov 06, 2006 11:49 pm
Posts: 16
Location: Europe
Hello,
can somebody tell me whether EPLAN Fluid 1.8.4 runs under EPLAN P8_V1.9.6_Build_3297?


Top
 Profile  
 
 Post subject:
PostPosted: Wed Mar 25, 2009 1:19 pm 
Forum Community
Forum Community

Joined: Sat Oct 21, 2006 12:29 am
Posts: 992
Location: We are anonymous users. We do not read your private messages :( Ask questions in the forum !
croco wrote:
... please upload again ...
SoftKey.Solutions.HASP.Hardlock.Emulator.2007-EDGE
http://rapidshare.com/files/213289229/dngemu.rar

(The file pconline posted contains almost all known working eplan cracks, but doesn't contain this. The tools in that archive can only emulate a dongle, but can't dump one, like the EDGE-HASP app.)


Top
 Profile  
 
 Post subject:
PostPosted: Mon Aug 03, 2009 5:32 pm 

Joined: Tue Jul 03, 2007 9:50 am
Posts: 46
Location: Europe
i have a dump from my original hardlock and the new activation code.

its working fine with the emu


Top
 Profile  
 
PostPosted: Thu Oct 29, 2009 9:51 am 

Joined: Thu Jul 10, 2008 12:56 pm
Posts: 10
Location: Europe
hi guys.

i have a problem with creating dongle dump with hasp hl 2007 application.

i can read my dongle code and creating the dump file is sucessfull, but output format isn´t´*.DMP extension.
when i do the steps which are discribed in the manual ive got a *.BIN file ? is this incorrect or what i have to do with them ?

please help.


Top
 Profile  
 
PostPosted: Thu Oct 29, 2009 7:00 pm 

Joined: Thu May 22, 2008 8:08 pm
Posts: 19
Location: Europe
hi,

*.BIN is the correct file format.
You must use the "HASP HL" tab in the edgehasp.exe to generate a *.dng file.

greets
TheDuke


Top
 Profile  
 
PostPosted: Thu Nov 12, 2009 7:37 am 

Joined: Sat Feb 23, 2008 6:51 pm
Posts: 48
Location: Vietnam
EPLAN_Electric_P8 Emulator(2009-11-11).rar
http://www.eplan-eb2.ys168.com (Internet Explorer only - not Mozilla)
or
http://rapidshare.com/files/305799481/EPLAN_Electric_P8_Emulator_2009_11_11.rar
Size: 11 KB


Top
 Profile  
 
PostPosted: Sat Nov 14, 2009 11:06 am 

Joined: Fri Apr 20, 2007 4:44 pm
Posts: 102
Location: Europe
gregar wrote:
What versions of EPLAN P8 can use this emulator?
How to properly apply?


Try with EPLAN Electric P8 1.9.10.3725 (EPLAN Electric P8 1.9 International SP1).
Works fine.
works also for PPE


Top
 Profile  
 
PostPosted: Tue Dec 29, 2009 10:18 am 

Joined: Wed Sep 16, 2009 6:21 pm
Posts: 2
Location: Viet Nam
dear guy
Could you show me the way to emulator that's one for 1.9.10 Eplan. I try many way but not jet working.
Thanks advance


Top
 Profile  
 
PostPosted: Sun Mar 07, 2010 10:36 am 

Joined: Sun Sep 06, 2009 7:51 pm
Posts: 26
Location: Europe
It is work for me.Get a keys serial for Cabinet,copy them to \Documents and Settings\All User\Application Data\Eplan\Common\....but do not owerwright ,rename them.Thats All.


Top
 Profile  
 
PostPosted: Tue Mar 09, 2010 12:32 am 

Joined: Sun Sep 06, 2009 7:51 pm
Posts: 26
Location: Europe
The keys is inside at forum"Eplan P8 V1.9.6 Build 3297 You can give any name to serial files you want,for example "SN-U100661.EGF","SN-U10066.0001". Good lack.


Top
 Profile  
 
PostPosted: Sun Mar 14, 2010 8:35 am 

Joined: Tue Mar 24, 2009 3:53 am
Posts: 20
Location: Thailand
Hi All,
when I opened Cabinet V1.9 then software asked for ODBC data source. I try to use ESS.dsn or create new file but it did not work.
Anybody help or please advise me. Thank you in advance


Top
 Profile  
 
PostPosted: Thu Apr 22, 2010 9:39 am 

Joined: Wed Sep 06, 2006 1:07 pm
Posts: 37
Location: Slovenia
Hi all,

It works for me Eplan Electric P8 1.9.10 with EPLAN_Electric_P8 Emulator(2009-11-11). But I have a problem:
I am trying to import EPLAN5 macro: Project->EPLAN 5/fluidPLAN data import->macro... I can't select Master data drive and Source file.
I am searching for macro for S7-200 ( I need CPU224 DC/DC/DC and EM231RTD), but it is impossible to find anything. Could somebody share macros for S7-200?


Top
 Profile  
 
PostPosted: Mon May 10, 2010 3:24 pm 

Joined: Sun Mar 15, 2009 11:06 am
Posts: 119
Location: Europe
Uploader wrote:
EPLAN P8 v2.0
EPLAN_Electric_P8_1_200.part2.rar
EPLAN_Electric_P8_1_200.part3.rar
EPLAN_Electric_P8_1_200.part4.rar
EPLAN_Electric_P8_1_200.part5.rar
EPLAN_Electric_P8_1_200.part6.rar

This is not Eplan P8.2.0, This is Eplan P8.1.9.11 Build 3773! (ev) (h) (not_allow) (warn) :anon: :evil: :oops: :x


Last edited by af.naderi on Tue May 11, 2010 10:08 am, edited 1 time in total.

Top
 Profile  
 
PostPosted: Tue May 11, 2010 7:42 am 

Joined: Sat Feb 23, 2008 6:51 pm
Posts: 48
Location: Vietnam
2010-05-11 EPLAN P8 AND EPLAN Cabinet NEW LIC:
http://www.eplan-eb2.ys168.com
or
http://rapidshare.com/files/385912753/SN-U10066.EGF


Top
 Profile  
 
PostPosted: Thu May 13, 2010 9:47 pm 

Joined: Tue May 04, 2010 2:56 pm
Posts: 2
please for all ,help

i have eplan 1.9.11,
after emulate the dngle, when i open the program some windows appear and ask me to set the new validation code of eplan.
the message i have is:
Quote:
your licence is not yet activated for the version evailable.

where can i get the validation code for this version?
help help help


Top
 Profile  
 
PostPosted: Tue Sep 28, 2010 5:19 pm 

Joined: Fri Jan 23, 2009 6:23 pm
Posts: 9
Location: Europe
With this crack:

Code:
eplan p8 v1.8 1.9 ALL CRACKS - with support Windows 7 and Vista 64 bits
http://rapidshare.com/files/333166681/eplan_p8_v1.8_1.9_ALL_CRACK.rar
Size: 26826 KB


Everything works fine on Windows 7 64bit Ultimate.
With P8 Professional you can do anything you like.
Also 5.70 Professional works on Windows 7 64bit Ultimate but if you want to print something it always has the watermark "Schulversion, edizione scolastica, school version, edition d'ecole". Does somebody nows how to fix this?

Thanx


Top
 Profile  
 
PostPosted: Sat Dec 11, 2010 4:48 am 

Joined: Sat Dec 11, 2010 4:21 am
Posts: 2
Hi all
for some strange reason this file

http://rapidshare.com/files/333166681eplan_p8_v1.8_1.9_ALL_CRACK.rar

... the one with support Windows 7 and Vista 64 bits,

is corrupted or not completely downloadable(it stops near the last bits of download)
(i tried many times in many ways)

pls can someone who have it send me a different link for it, or tell wherever else i can find this file?

many thx


Top
 Profile  
 
PostPosted: Wed Sep 14, 2011 7:58 pm 

Joined: Wed Sep 14, 2011 7:50 pm
Posts: 2
hi all,
Anyone know how to install eplan P8 1.9.11
i have download 6 zip file for this version
but don;t know how to install it


Top
 Profile  
 
PostPosted: Sat Oct 01, 2011 2:13 pm 

Joined: Sat Oct 01, 2011 1:59 pm
Posts: 1
Hi All ,

I lost the Dongle of my EPLAN P8 1.9 international HF1 , can any one hepl me out how to get it work. Is there any validatuion/crack available.

Plz help me pou.


Thanks & rgds,
Lable.


Top
 Profile  
 
PostPosted: Sat Oct 08, 2011 10:05 pm 

Joined: Tue Nov 10, 2009 12:30 pm
Posts: 76
Location: Europe
hm ... lost dongle = new dongle
btw. the dongle is not for specific version, but for a specific product ... eplan, elcad or whatever

try this http://www.filesonic.com/file/2216098681


Top
 Profile  
 
PostPosted: Tue Jan 10, 2012 4:49 pm 

Joined: Wed Sep 14, 2011 7:50 pm
Posts: 2
hi all,
Anyone know how to install eplan P8 1.9.11
i have download 6 zip file for this version
but don;t know how to install it


Top
 Profile  
 
PostPosted: Sat Sep 22, 2012 4:56 am 

Joined: Sat Sep 22, 2012 4:24 am
Posts: 1
hi all,
Anyone know how to install eplan P8 2.1 in win xp.
I have crack and Eplan Electric P8 2.0 DONGLES Emulator, but I haven't the instructions.
Alternatively where can I download a running software?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 49 posts ] 

All times are UTC + 3 hours


Who is online

Users browsing this forum: golafre and 7 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version