PLCforum.uz.ua

========== 2021 personal keygen ===== Prefered to use Private Message with your generated "hardware id" to Chaos363 =======

chaos363 wrote:Let's just test it out. I would provide an application with which you can determine your hardware id.

Example wrote:HW-ID:
*1SVQATZ3LEB3BNH2004,*1RSRCC9GHYUELA4001C,*1EXXEWU8HZ9GFKA2018

Tell me this and you will receive the license and patch. Prefered to use Private Message
The keygen is released later with which the license can be created flexibly.

I couldn't test any other products but activation could open the entire licensing system.
So far, the activation has worked on three different systems.

Unfortunately, the license only works for one user so far.
The license cannot be used via a remote desktop and not in a VM.
A solution for this should only be a question of time.

Product: EPLAN Electric P8 2.9 / EPLAN Electric P8 2.9 SP1
Application: https://anonymousfiles.io/ffwxs7wQ/

EPLSG wrote: ↑

Thu Jan 21, 2021 3:07 pm

I think that:You are the magician. It would be great a report for installation. I want to ask you: Eplan normally have an online activation,inserting EID directly whwn open P8 for the first time. Is patched too?
With full patch that I hope arriving soon is possible works with Eplan with internet connected or not?

=========== Need edit C:\Windows\System32\drivers\etc\hosts file ===========================
The following steps must be carried out to install the activation.
This information is also contained in the Readme.txt, which is available in download file.

Code: Select all

1. Open C:\Windows\System32\drivers\etc\hosts
	-> insert the following lines
		0.0.0.0 eplan.prod.sentinelcloud.com
		0.0.0.0 licensingservice.epulse.cloud
2. Copy Crack\vcruntime140.dll into install dir 
	-> C:\Program Files\EPLAN\Platform\2.9.3\Bin
3. Copy License\lservrc into lic dir
	-> C:\Users\Public\EPLAN\Common
4. Run EPlan

In the end, the online activation only downloads the license that I have made available to you and pushes it into the following folder.
When the application starts, it is checked whether this file is there.
If not, the popup for entering the license appears.
The license itself is an exact replica of the original, where only the PKCS#1 check is not valid. This is what vcruntime140.dll is for.
C:\Users\Public\EPLAN\Common

The change in the hosts file means that EPLAN can no longer correctly resolve the dns addresses for licensing and thus cannot make calls home.
Of course, the possible addresses could be expanded by updates from the manufacturer.

The activation that I have sent is in a final state.
There could only be problems with an incorrect calculation of the hardware id.
Now the possible users must be adjusted or network licenses generated.

At the moment I don't think that the manufacturer expects this activation, which is why everything should work.

Luca wrote:Version 2.8 is out and they are switching to "state-of-the-art technology in the licensing management" with online activation. The "virtual" dongle concept will not work. I hope there will be a solution but I'm kinda skeptical at the moment

chakotay wrote: ↑

Tue Oct 08, 2019 5:36 am

License Hack (chinese):
https://www.jb51.net/softs/652424.html



Can someone verify?

Cheers,
Chakotay

sadefa wrote: ↑

Mon Apr 20, 2020 10:36 am

today I have the new EPLAN v2.9 to share
............

ikom81 wrote: ↑

Mon Dec 14, 2020 2:34 pm

How I can install second Eplan on the same computer.
I have install 2.9 and want to install 2.7 on the same computer. Because from 2.9 I can't Save the project to lower version.

Vasiliy wrote: ↑

Wed Jan 20, 2021 8:26 am

Hello!

I downloaded the application and defined my hardware id:
* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001C, * 12AMXQLZB4P5BAL2018

chakotay wrote: ↑

Wed Jan 20, 2021 8:46 am

*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018

liu_sg780912 wrote: ↑

Thu Jan 21, 2021 12:02 am

*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018

Vasiliy wrote: ↑

Thu Jan 21, 2021 5:50 am

I did everything as written in ReadMe. When Eplan was launched, there was a choice of licenses. I chose Professional. But upon further launch, Eplan crashed. I tried to run it several times, rebooted Windows. Then I found out that when I generated the "id hardware" and copied it from the [url] https://anonymousfiles.io/50zb3qty/ [/ url] window, I saw extra spaces after the "*" (* 1QNEPJ6SBWQK5EB2004, * 1JR3EUEVSGDY2KD001Z, * 1JR3EUEVSGDY2KD001Z ). Maybe this is the problem? I watch the following messages, all send without spaces:
*1ELRR2UDNSCX8MC2004,*1C7PU7U5AR4MWHJ001C,*16GB6A2QUP9ZLJ62018
*1HSMRKF4QEZPPNG2004,*1HHE8C7YHBFJSMV001C,*1F35GPETU2QKSDZ2018

chaos363 wrote: ↑

Thu Jan 21, 2021 7:46 am

I noticed the spaces and removed them. Since you come to the selection window for the license, your hardware id must be correct. Otherwise a message would appear that the license is not for your computer.

I once had the problem described with myself. Internally, he cannot start the license system, which is why he aborts when it starts. I cannot say what the exact cause is, but at the time I had installed EPLAN Education 2.9 and EPLAN Electric P8 2.9 at the same time. After I completely removed both installations, EPLAN Electric P8 2.9 was reinstalled, which worked in the end.

Problems often arise when uninstalling, especially when two versions are installed at the same time. Data is not removed here because the first uninstallation removed the entry for it.
In the event of such problems, reinstall and uninstall the product until everything is clean.

If that doesn't help, please write me your operating system (32bit / 64bit) and the exact version of EPLAN.