PLCforum.uz.ua

It was there on the zip file uploaded yesterday: '2016_01_05 EPLAN P8 1.8- 2.5 patch Windows x32x64'.

If you download it today, there's a new version: '2016-01 06 EPLAN P8 1.8- 2.5 patch Windows x32x64', which does not contain any subfolder.

Luca wrote: What exactly did you do? Only copied the version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin ?

I even reinstalled the program, copied the file but still lag occur about every 60 seconds.
I'm doing this on a virtual machine but I doubt that this is the problem.

Edit: the only real difference is that at the start the eplan-eb2.ys168.com opens in the browser..

Yes, just copy version.dll to C:\Programmes\EPLAN\Platform\2.5.4\Bin
System : Win 7 Pro 64b Ver. 6.1.7601 Service Pack 1 (mode test)
Eplan 2.5 HF1 Ver. 9451

Can anyone confirm if lag stops with this new patch? I just went to 2.4 two weeks ago and I don't want to risk again now.

I can't confirm it. Even with the new patch that is uploaded today i still have freezes. I have tried almost everything - new installation, with HF1, without HF1, with SN-U29627.EGF, with SN-U10066.EGF, the dll file is correctly placed because i have pop-up every time the program is started... but still the freezes occur

Edit: now that I think about it, may be the problem is within HASP runtime version. I'll look for a newer and will tell you how it went
Edit2: Nope. There is no newer version. Nothing changed

I only tested Electric P8 2.5.4.9380 . Are you installing EPLAN not this version?

Yes the version is 2.5.4.9380

Luca wrote: i have pop-up every time the program is started... but still the freezes occur
.... the only real difference is that at the start the eplan-eb2.ys168.com opens in the browser..

Same to me (Windows 10 x64 Home Single)!

There is a new version of the dll file. The pop-up is gone but don't get too excited - the lag stays.

Are there anyone who doesn`t have lags in eplan 2.5?

Does not work (WIN 10 64 bit) ;(

Yes, me.

Can you explain detail? Some versions version.dll really reduce the number of lags. For example, without version.dll when you draw a continuous polyline with more segments the interface is frozen for 10 seconds every 60 seconds. With some versions of version.dll lags occur much less frequently. For example, when changing the text box, and so on. It is much easier to tolerate than the original lags. But if you have no lags, we want to understand what the differences in your system.

I confirm that the lag is present with this new file dll.
In this mode is not possibile to work.
Anyone has any other solutions?
Help help help....

If you look to the site http://eplan-eb2.ys168.com/, there is again a new verion.

Lets hope......

No hope. I've tested it

To re download the new crack file.

Yay finally its working!

I've tested it for about 10 minutes and there was no lag whatsoever!

The pop-up is back but this is a minor thing.

Thanks PDLFFALF!

Congratulate everyone. Will it work on hotfix1 for Eplan Electric P8?
And more question: Harness proD 2.5(russion version) is not working. Fatal eroor CLT error 80004005 with last crack.

Yeah..!!

It's working..! Thanks a lot PDLFFALF..!

I'm using
OS: Windows 7 Professional 64 Bit
OS Version: 6.1.7601 Service Pack 1
EPlan Electric P8 - Ultimate (64 bits)
Version: 2.5
Build: 9380

Simply copied file 'version.dll' to specified path and worked like charm.

We can get to work, now

Oh! wait ... we can get to work now ...

Can't get this to work.

I downloaded new patch. Run the patch-file and copied version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin
SN-U29627.EGF is placed in C:\Users\Public\EPLAN\Common, and SN-U29627.reg is applied to register.

When I try to start EPLAN the webpage http://eplan-eb2.ys168.com/ opens (why?) and this message:
http://i.imgur.com/cCqQj8y.png

Then nothing more happens, can't click OK on the button. Just crashes.

What is wrong?

Edit: I had working 2.4 before, but uninstalled that in prior to installing 2.5

http://i.imgur.com/9VdLhaY.png

Edit 2: It works if I delete version.dll from C:\Program Files\EPLAN\Platform\2.5.4\Bin. EPLAN starts up licensed etc, but with lag issue. Why does webpage open and program crash at message box with version.dll?

Windows 10

PDLFFALF wrote:http://pan.baidu.com/s/1i4aRu6p

Thanks a lot for link. But there is one more problem: Whisout registration on the Baidu cloud is not alow to dowload the file. For registration need china phone number. Is this file in other place?

What about using new version.dll with Eplan Electric P8 HF1?

The lag is still much less than before with version 2.4
Start of the program is very slow
Thanks anyway

If anybody have lags in 2.4 just copy the version.dll in

\Platform\2.4.4\Bin

that´s the soloution in my case

I confirm that this settings the lag is not present nad work very well also 2.4 version
Bye Bye

Can anyone tell me why crack website opens up when I put version.dll in eplan folder and start eplan!?

Also eplan wont start up, crashes. I'm not even getting the splash screen.

Windows 10? I have the same Problem with Win 10, Win 7 works.


---

Anyone tested the dll it with 2.5 HF1?

I have a new Windows 7 x64 and want to install Eplan Electric P8 2.5.4.9380
Please, prompt the correct installation procedure and treatment - step by step:

1. Install Eplan Electric P8 2.5.4.9380
2. ...
3. ...
...

Thanks

1. NET OFF
2. Install Eplan
3. UAC OFF + (WINDOWS TEST MODE)
4. HASPUserSetup install.
5. Install multikey + copy SN-U29627.EGF C:\Users\Public\EPLAN\Common\ + add reg database: *.reg
6. Copy version.dll C:\Program Files\EPLAN\Platform\2.5.4\Bin\

It works for me (WIN 10 64 bit + EPLAN 2.5 HF1)

supplementary

Show

does anyone know where's the supplementary field in EPLAN 2.5?

Hello antoan,

Can you tell me exactly wich version you have use for Windows 10 please.

I have no problems with windows 7 but it doesn't work with windows 10.

I really need it work's.

Thanks for help and sorry for my english.

What is the problem? You could not install the multikey program?
(I use Eplan 2.5 (+HF1) + WIN 10 Pro 1511 64 bit)

Has anyone got a Virtual Machine of this running?

Would be easier to share than everyone finding issues and posting questions.

antoan wrote:1. NET OFF
2. Install Eplan
3. UAC OFF + (WINDOWS TEST MODE)
4. HASPUserSetup install.
5. Install multikey + copy SN-U29627.EGF C:\Users\Public\EPLAN\Common\ + add reg database: *.reg
6. Copy version.dll C:\Program Files\EPLAN\Platform\2.5.4\Bin\

I did this procedure but with file "SN-U38269". I found it when I downloaded the program from viewtopic.php?f=7&t=23112&p=74234#p73945.
Finally, when I run the program, it displays this and it opens the link "http://eplan-eb2.ys168.com/". What do I have to do?

Burned Electrician:

I think this file (SN-U38269+reg) is not good.

Use this:
SN-U29627.EGF + SN-U29627.reg or SN-U10066.EGF + SN-U10066.reg
I think is a bad entry in the windows regisrty.

Look at the difference:

SN-U10066.EGF:
"HlkMemory"=hex:\
00,00,57,55,50,30,55,31,30,30,36,36,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
SN-U29627.EGF:
"HlkMemory"=hex:\
00,00,57,55,50,30,55,32,39,36,32,37,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\

I hope I did something to help

Antoan:

Where will I find it?

I forgot to say that my system is windows 8.1.
I found somewhere these steps for version 2.3:

"1. Install Eplan P8 2.3
2. Copy the license file (SN-U10066.EGF) C: \ User \ Public \ Eplan \ Common \;
3. SN-U10066.reg run the file and add data to the registry;
4. Run the driver installation Multikey - emulator from your Release \ MultiKey64 \ install.cmd;
5. Run a test mode in Windows 7 x64 dseo13b.exe running the program and the radio button for "Enable Test Mode".
By the way, just note that here also provides the opposite effect "Disable Test Mode", disable the test mode;
6. In one corner will display "Test Mode Windows 7 Rekease 7600;
7. Run the program dseo13b.exe;
8. Add a digital signature for the driver Multikey.
To do this, select "Sign a System File" and enter the filename including the full path "C:\Windows\System32\Drivers\multikey.sys", test mode does not turn off!
9. Reboot your computer;
10. run eplan prof+"

Are these the same approximately with yours?

Burned Electrician:

Here is the crack for x64 windows:
http://eplan-eb2.ys168.com/
(2016-01-15+EPLAN+2.+1+2.3+2.4+2.5+X64+crack.rar)

The exe file will do everything:
- copying license (SN-U29627.EGF)
- add data to the registry
- multikey install...

Antoan:
Sorry, but I was confused.
Therefore, which are the correctly steps?

edit: I did this procedure:
1. Net off
2. Install eplan
3. Install "HASUserSetup.exe"
4. run "EPLAN全系列 2. 1 2.3 2.4 2.5 X64 crack.exe"
5. copy version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin

but without result. The problem remains the same.

Burned Electrician:

Are In Windows Device Manager, between the usb controllers these:
SafeNet Inc. Hardlock Key
SafeNet Inc. USB Key
?
If yes, then I think you have wrong entries in windows registry.

if you have the Wrong SafeNet Inc. Hardlock Key. Then you must deinstall this with remove driver. An install the Hardware Manual.

Antoan and Diamond:

Sorry, but I don't understand you. I have no idea what you said.

New file version.dll work fine with eplan P8 version 2.4 and 2.5 but the lag is present when i work with eplan enhanced version 5.
Anyone have this problem?
It is possibile have a new file version.dll that work also this version?
Thank's a lot for response.

antoan wrote:What is the problem? You could not install the multikey program?
(I use Eplan 2.5 (+HF1) + WIN 10 Pro 1511 64 bit)

What eplan 2.5 build do you use? 9380?
I also Have windows 10 64bit
OS Name: Microsoft Windows 10 Home
OS Version: 10.0.10586 N/A Build 10586

Same issue with burned electricians.
Did the following procedure:

edit: I did this procedure:
1. Net off
2. Install eplan
3. Install "HASUserSetup.exe"
4. run "EPLAN全系列 2. 1 2.3 2.4 2.5 X64 crack.exe"
5. copy version.dll to C:\Program Files\EPLAN\Platform\2.5.4\Bin

Command prompt show the following after ran crack.exe
no devices removed
removed failed
devcon failed

Eplan installed on W8.1
EP Version: P8 2.5.4.9380

Thanks!

Copied all the multikey files to c:\windows\system32
ran install again. this time got a little further. Not sure if i should skip this step and move forward since devcon failed.
I ran the MultiKey64 on a w8.1.

No devices were removed.
Device node created. Install is complete when drivers are installed...
Updating drivers for root\multikey from C:\Windows\system32\multikey.inf.
devcon failed.
Press any key to continue . . .

AmazingTrans:

I read your pm but I didn't manage to do anything about eplan. I don't understand where is the problem about the crack! I was thinking to install previous version of eplan but I didn't. Because I believe that the problem will remain.

Could put somebody put complete crack for Eplan 2.4 ? or i should use the crack for 2.5 ?
Eplan 2.5 i manage to make-it run for one trial , after that , i close-it and openit again , and is asking about license.

From all topic about Eplan 2.4-2.5 seems to be better on Eplan 2.4 , but the link that i have use-it is containing just Eplan 2.4 , no crack , and i tried to use this patch from Chinese site, but also this is asking about license.
Like idea i have uninstall 2.5 , and install 2.4 . Should i do something more about REG , or to delete something into the system ?

Thank you a lot for help .

PS... I have succeded to unblock with the Eplan 2.2 crack , but i have some errors when i open . also is the version ulimeted , not the version profesional .
I can use -it .
If you have the crack version for 2.4 please put some lick for download .

Thank you a lot !

Done with Eplan Electric P8 2.4.5 9380, windows 10 pro 64bit 1511

1. install Eplan
2. Off OUAC
3. Enter to Windows Test Mode
4. Start EPLAN全系列 2. 1 2.3 2.4 2.5 X64 crack.exe
5. Copy version.dll
6. Done

I have Eplan Electric P8 2.4.4 8366, windows 10 pro 64bit build 10586, but not work, help me.

the problem is the dongle.