plcforum.uz.ua

International PLC Forum
It is currently Wed Nov 22, 2017 2:20 pm

All times are UTC + 3 hours




Post new topic Reply to topic  [ 150 posts ]  Go to page Previous  1, 2, 3
Author Message
PostPosted: Wed Feb 24, 2016 5:41 pm 

Joined: Wed Feb 24, 2016 5:38 pm
Posts: 1
Pls Help.
i cannot decompress
SN29627.exe
its just Shows one file -
SN-U29627.EGF

I cannot install it right without the other files
like install.xml, SN-U29627.REG and so on

thx


Top
 Profile  
 
PostPosted: Fri Mar 18, 2016 11:07 am 

Joined: Tue Jun 17, 2008 8:29 am
Posts: 12
Location: Ganymed
Image

Who is the creator of version.dll ?
First I want to thank you for this patch/hook or whatever it is.

Two questions:
1. Can you tell us more about your solution? What is the issue with 2.5 ?
2. Is it possible to remove this link and the Chinese Popup window?

Cheers,
chakotay


Top
 Profile  
 
PostPosted: Sun Mar 20, 2016 11:52 pm 

Joined: Sun Mar 20, 2016 10:55 pm
Posts: 1
used link :
Eplan 2.5.4 link +all the tools needed.:https://cloud.mail.ru/public/48mt/2iE4wGocb
crack :http://eplan-eb2.ys168.com/

i'm new here and i wanted to try EPlan cause i read about it all so i tried looked abit and i made worked finally, i had a problem with the multikey driver whatever i open eplan 2.5 it ask for activation
what i did was :
after the instalation go to file that you download it and install HASPUserSetup path for it is:"\Electric P8 2.5.4.9380\ELM\Services (x64)\Drivers\
then you need to use the command promp and go to the same directory (cd C:\your path\Electric P8 2.5.4.9380\ELM\Services (x64)\Drivers\" and execute this command
command :"haspdinst.exe -install"
then turn off digital signature Open the Command Prompt window by right click in the Start button, Command Prompt(Administrator)
2. On the Command Prompt type in the command :
bcdedit.exe -set loadoptions DDISABLE_INTEGRITY_CHECKS
bcdedit /set nointegritychecks ON
then install the multikey64 (crack folder the first link )
go to Device manager and check if the driver is installed and showing "Virual USB Multikey" skip this :
if you find "unknown Driver" then right click and select update then select manual install and point to Crack\release\multikey64 or 32 depend on what you have.
you will have a problem even with that cause you need to add a signature to the driver by using dseo13b.exe (in the crack folder first link)
Add a digital signature for the driver Multikey. To do this, select the "Sign a System File" and enter the file name, including the full path C:\Windows\System32\Drivers\multikey.sys
after that go to device manager and look for "Virual USB multikey" you will notice it have a yellow sign on it right click on it and disable it then turn it on again you will notice that the yellow sign is gone
after that apply the crack : http://eplan-eb2.ys168.com/
just copy the dll file in Bin and execute EPlane Crack....X64..exe
then even after that it didn't work -_- still ask for activation .
what i did was i went back to device manager and i noticed the yellow sign again i opened dseo13b.exe and repeated "sign a system file...... same path .
disabled the driver and activated again and the sign was gone went and tried to open Eplan 2.5.4 and it worked
no activation no lag no nothing.
hope it help you guys.


Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 10:02 pm 

Joined: Thu Jun 18, 2009 7:46 pm
Posts: 26
Location: Europe
F8 activate again to get into Safe Mode

Win + X Press
Prompt (administrator) launch.
bcdedit / set {default} bootmenupolicy legacy Enter, or copy and paste by right-clicking in cmd
Wait until the process is complete.
Restart and F8 function in Windows 10 again.

That was it. Now you have a boot menu with Windows 8 and the safe mode.

Start Now computer without driver signing


Top
 Profile  
 
PostPosted: Wed Mar 23, 2016 10:09 pm 

Joined: Thu Jun 18, 2009 7:46 pm
Posts: 26
Location: Europe
Sprudel1968 wrote:
F8 activate again to get into Safe Mode

Win + X Press
Prompt (administrator) launch.
bcdedit / set {default} bootmenupolicy legacy Enter, or copy and paste by right-clicking in cmd
Wait until the process is complete.
Restart and F8 function in Windows 10 again.

That was it. Now you have a boot menu with Windows 8 and the safe mode.

Start Now computer without driver signing


Top
 Profile  
 
PostPosted: Thu Apr 14, 2016 3:32 am 

Joined: Mon Jan 07, 2013 12:00 am
Posts: 10
Dear colleagues!

does anybody have detailed instruction + archive with "tools" for activation ePlan P8 2.4 Electric.
I had tried to do this by different instructions and by different "tools" which I could download.
I tried to do it at:
1. Windows 8.1 German version
2. Windows 7 Ultimate Russian version (this Windows is installed in VM Parallels on macbook)

Everywhere instructions are different! Recommendations by users are different.
I am confused! (h)

After all actions made by instruction I got this result:
Image

What I do wrong?

Windows 8.1
Why when I start install.cmd I get answer "devcon failed" ? What is wrong here?


Top
 Profile  
 
PostPosted: Mon Apr 18, 2016 7:25 am 

Joined: Tue Jun 17, 2008 8:29 am
Posts: 12
Location: Ganymed
Forget Devcon.
If you're using Win7 get this Tool: http://depositfiles.com/files/jzts8axpq
If you're above,

Sprudel1968 wrote:
F8 activate again to get into Safe Mode
Win + X Press
Prompt (administrator) launch.
bcdedit / set {default} bootmenupolicy legacy Enter, or copy and paste by right-clicking in cmd
Wait until the process is complete.
Restart and F8 function in Windows 10 again.

That was it. Now you have a boot menu with Windows 8 and the safe mode.

Start Now computer without driver signing


Cheers


Top
 Profile  
 
PostPosted: Fri Apr 22, 2016 3:13 pm 

Joined: Tue Nov 02, 2010 3:37 pm
Posts: 8
dambre77 wrote:
New file version.dll work fine with eplan P8 version 2.4 and 2.5 but the lag is present when i work with eplan enhanced version 5.
Anyone have this problem?
It is possibile have a new file version.dll that work also this version?
Thank's a lot for response.

Aanyone has information on this topic?
Thank's a lot for response
Bye


Top
 Profile  
 
PostPosted: Wed May 04, 2016 7:02 pm 

Joined: Fri Dec 11, 2009 10:52 pm
Posts: 14
Location: Athens
I noticed that the patch was renewed. Could anyone tell me how to apply? Because the instructions is in Chinese.


Top
 Profile  
 
PostPosted: Fri May 06, 2016 5:23 pm 

Joined: Fri Dec 11, 2009 10:52 pm
Posts: 14
Location: Athens
I tried something but it didn't work out. The problem remains the same.
Image


Top
 Profile  
 
PostPosted: Wed May 11, 2016 9:33 am 

Joined: Tue May 10, 2016 1:47 pm
Posts: 1
Hi.. There is my guide how instal Eplan P8 2.5 on W10. Its translated in Google translator so sorry for english (suc)

Instructions for commissioning Eplan 2.5 for Windows 10 (rr)

1. Disconnect your Internet connection
2. Install Eplan
3. Switch off UAC - (not necessary)
a. Search "UAC" (User Account Control settings)
b. Slider all the way down.
c. OK
4. Run Test mode
a. Run Command Prompt as administrator
b. Enter - "bcdedit.exe -set TESTSIGNING ON"
- With the message "The operation completed successfully.
5. Disable the driver signing enforcement
a. Settings -> Update and Security -> Restore -> Restart
b. Troubleshoot -> Advanced Options -> Startup Settings -> Restart
- A menu with nine options, all represented by its own function key
c. Push F7 (Disable driver signature enforcement)
6. Install Crack
a. From the "15.01.2016 EPLAN 2.1 2.3 2.4 2.5 X64 crack" to start EPLAN ??? 2.1 2.3 2.4 2.5 X64 crack.exe (instead of the 3 ??? scribbles)
- Will see red window
b. select "Install"
7. Install HASPUserSetup.exe http://sentinelcustomer.safenet-inc.com/sentineldownloads/?s=&c=Software+Developer&p=HASP4&o=all&t=all
8. copy the file "version.dll" from the "EPLAN 15/01/2016 2.1 2.3 2.4 2.5 X64 crack / EPLAN Electric P8 2.5 60 ?????" in C: \ Program Files \ EPLAN \ Platform \ 2.5.4 \ Bin
9. Restart
10. Enable Internet Connection
11. Run Eplan and enjoying Artistic cycling (if you have installed 64-bit MS Office)


Top
 Profile  
 
PostPosted: Wed May 18, 2016 10:59 pm 

Joined: Tue Nov 02, 2010 3:37 pm
Posts: 8
The new version of file version.dll into the zip archive with date 2016-04-29 disable disables opening of the web page but the software eplan show up again the lags.
someone else to control this thing?
Thak's
Bye


Top
 Profile  
 
PostPosted: Mon May 23, 2016 8:00 pm 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
I didnt understand....did the lagging stopped???

I have 2.4 version, i also tested the 2.5....but the same...!

Is there any solution for the lang to stop?


Top
 Profile  
 
PostPosted: Wed May 25, 2016 12:17 am 

Joined: Thu Dec 27, 2007 8:47 pm
Posts: 63
Location: Europe
Hello friends, (pgood)

I just finished the installation of EPLAN Electric P8 2.5.4.9380 on Windows 10 64Bits !

The Eplan works great but the lag continues.... Any solution ???

I install the crack "version.dll" (2016-4-12 EPLAN Electric P8 2.5 60)....

Thanks Bachir Khiati and ewil_qido for your posts!

Regards,


Top
 Profile  
 
PostPosted: Sat May 28, 2016 6:56 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
Hello,

Here is available a new addition to latest medicine for Eplan:

http://eplan-eb2.ys168.com/zy/b_old/not ... %B6%A1.rar

Can anybody explain what is it for, as well is there a fully functional receipt for using a medicine for Eplan Pro Panel 2.5 under Windows 10?

Thanks


Top
 Profile  
 
PostPosted: Sun May 29, 2016 11:52 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
krepac wrote:
Hello,

Here is available a new addition to latest medicine for Eplan:

http://eplan-eb2.ys168.com/zy/b_old/not ... %B6%A1.rar

Can anybody explain what is it for, as well is there a fully functional receipt for using a medicine for Eplan Pro Panel 2.5 under Windows 10?

Thanks


It isn't working....when i click the link it only show somethin on Chinese!


Top
 Profile  
 
PostPosted: Sun May 29, 2016 12:18 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
In archive is what I used to crack Pro Panel 2.5 (medicine, description working HASP) under Windows 10 x64.
As well you have a snap of Eplan Panel Pro.

http://www65.zippyshare.com/v/hdj3waHp/file.html

http://www65.zippyshare.com/v/XiiwOAC0/file.html


Top
 Profile  
 
PostPosted: Sat Jun 04, 2016 7:28 pm 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
krepac wrote:
In archive is what I used to crack Pro Panel 2.5 (medicine, description working HASP) under Windows 10 x64.
As well you have a snap of Eplan Panel Pro.

http://www65.zippyshare.com/v/hdj3waHp/file.html

http://www65.zippyshare.com/v/XiiwOAC0/file.html


How does it work????


Top
 Profile  
 
PostPosted: Sat Jun 04, 2016 8:24 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
I'm not sure is it fully functional (lack of experience). Why don't you download snap? I have problem with part database, EPLAN denies that I'm using Office x64 (I'm getting "microsoft office 64 bits is required for 64-bit version of the eplan platform" when it tries to open ESS_part001). Can anybody help with this?

Thanks


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 12:36 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
krepac wrote:
I'm not sure is it fully functional (lack of experience). Why don't you download snap? I have problem with part database, EPLAN denies that I'm using Office x64 (I'm getting "microsoft office 64 bits is required for 64-bit version of the eplan platform" when it tries to open ESS_part001). Can anybody help with this?

Thanks


Just install windows office x64


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 9:35 am 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
You misunderstood me, I have it installed, Eplan just denies it.


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 4:10 pm 

Joined: Wed Dec 30, 2009 8:38 pm
Posts: 45
krepac wrote:
You misunderstood me, I have it installed, Eplan just denies it.


I have the same problem


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 7:39 pm 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
krepac wrote:
You misunderstood me, I have it installed, Eplan just denies it.


Sorry i didnt understand.I had the same problem at first but i installed Microsoft Office Professional 2013 Plus and it works perfect


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 8:04 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
In a meantime I was experimenting with it and made a mess. Does anybody know how to re-install Eplan?
I tried without success, during installation it says that some files are missing (.cab , .lic or something alike).
Does anybody know how to remove traces of previous successful installation?

Thanks


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 8:35 pm 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
Why dont you restore your system to a past date that worked?


Top
 Profile  
 
PostPosted: Sun Jun 05, 2016 8:46 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
System works, Eplan is removed as well as HASP and related files but it doesn't help.
I cant restore it because in a meantime I made some significant changes within.


Top
 Profile  
 
PostPosted: Mon Jun 06, 2016 1:13 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
Be sure that when you install Eplan check all of the installations at "customized installation" because you might have not uninstalled Licence Client before and the missing files are from this exe and not Eplan! So if the installation "see" that you already have Licence client it doesn't installs the exe but the missing files remains missing


Top
 Profile  
 
PostPosted: Mon Jun 06, 2016 11:15 am 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
OK, after I removed Eplan's tail from C disc, HASP and crack which I supposed was visible in device manager (USBkey - something alike) I succeed to install it back - but only from the desktop?! While it was located on the other partition I couldn't do it, how that's possible dunno. Still there is a problem with recognizing Office 2016 x64 as 64-bit program.
Did anybody succeed to resolve this problem?


Top
 Profile  
 
PostPosted: Tue Jun 07, 2016 2:23 pm 

Joined: Fri Nov 07, 2014 12:23 pm
Posts: 2
djto wrote:
krepac wrote:
You misunderstood me, I have it installed, Eplan just denies it.


I have the same problem


Install MS Access x64


Top
 Profile  
 
PostPosted: Thu Jun 09, 2016 12:11 am 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
I replaced old version of Office 2016 x64 with Office 2016 16.0.4229.1006 Pro Plus x64 (before that I removed Eplan and all its tails), after what I installed Eplain again. Now it's not complaining. Is it fully functional I don't know.

P.S. To anybody who's using cracked software I warmly advise to install NetLimiter Enterprise v4.0.13.0 by DVT (this version is cracked by DVT and works definitely, don't experiment with others) at the first place, so you could block all applications trying to reach anything on internet.


Top
 Profile  
 
PostPosted: Fri Jun 10, 2016 2:58 am 

Joined: Fri Jun 10, 2016 2:42 am
Posts: 1
For those having problems with MS Office 2016 x64 just need to go to microsoft https://www.microsoft.com/en-us/download/details.aspx?id=13255 choose download and instal AccessDatabaseEngine_x64.exe

This is a known problem from EPLAN and it will be fixed on version 2.6 arriving on 08/2016.


Top
 Profile  
 
PostPosted: Fri Jun 10, 2016 7:51 am 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
Thanks, somehow this problem with Office disappeared after I re-install latest cracked version.


Top
 Profile  
 
PostPosted: Sat Jun 11, 2016 11:59 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
OK with the Office.
What about the crack with the spikes?
Will it ever be corrected???


Top
 Profile  
 
PostPosted: Sat Jun 11, 2016 1:01 pm 

Joined: Sat Sep 11, 2010 7:11 pm
Posts: 23
Spikes? I'm not sure is it fully functional, it's loading without problems at least. I did some elementary things successfully, I'm still beginner so I can't judge it.


Top
 Profile  
 
PostPosted: Mon Jun 13, 2016 5:30 pm 

Joined: Wed Dec 16, 2015 11:17 pm
Posts: 14
hello,
I have instaled Eplan 2.5, it run fine for a while, and i did not use-it aboutone month.
Now it ask validation code.i have tried to put again the crack , but nothing new , it is still asking validation code
Image
Image.
can somebody help me to fix this issue ?

It was running about one month with no problem.

Thank you in advance for help me to solve the issue
Image
http://imgur.com/a/qPulb


Top
 Profile  
 
PostPosted: Wed Jun 15, 2016 7:20 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
Maybe you are using he crack which is valid for one month only. I am using it myself because it is the only one which is not causes these "spikes"!
Try changing your date a month behind, maybe that fixes the problem


Top
 Profile  
 
PostPosted: Thu Jun 16, 2016 4:23 pm 

Joined: Fri Nov 07, 2014 12:23 pm
Posts: 2
I installed EPLAN 2.4 and key from eplan 2.5. Everything worked fine, no freezes. Then I installed eplan 2.5. At the start eplan 2.4 and 2.5 become long to load. Then I reinstalled LicenseManager from version 2.4, and EPLAN start faster, but for version 2.5 it is not compatible. Apparently in new version of LicenseManager changed key verification, which is why there so long starts and freezes.


Top
 Profile  
 
PostPosted: Thu Jun 16, 2016 4:40 pm 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
I have done the same but the crack will expire in one month time!!!!
The 2.5 crack lasted for ever but had problems during the use of the programm....(it stuck often)


Top
 Profile  
 
 Post subject: Re: EPLAN P8 2.5 CRACK
PostPosted: Thu Jun 23, 2016 5:48 pm 

Joined: Sun Dec 14, 2014 6:06 pm
Posts: 10
Rasputingue wrote:
It seems they found or might find a solution here: http://tieba.baidu.com/p/4081673932

A guy says (google translated) "The reason is that the software detects the card dongle drivers drive to upgrade my connection always has been reported there is no way to share"
and three replies ask them for the solution by email.

If by any chance someone here knows Chinese better than google translator maybe he give us a hand here.

我的连接总被举报实在没办法分享了 = having nothing to do with the lag about EP8
卡的原因就是软件检测加密狗驱动了升级驱动即可 = (read) the software detects the dongle drivers so that the ep8 lags,all you need to do is upgrate the driver of usb dongle

(suc) electrical engineer from China


Top
 Profile  
 
 Post subject: Re: EPLAN P8 2.5 CRACK
PostPosted: Sat Jun 25, 2016 3:23 am 

Joined: Fri May 13, 2016 1:55 pm
Posts: 17
auto_keygen wrote:
Rasputingue wrote:
all you need to do is upgrate the driver of usb dongle


How this can be done?
Any directions?


Top
 Profile  
 
PostPosted: Fri Jul 15, 2016 10:52 am 

Joined: Mon Jan 27, 2014 7:21 pm
Posts: 1
antoan wrote:
1. NET OFF
2. Install Eplan
3. UAC OFF + (WINDOWS TEST MODE)
4. HASPUserSetup install.
5. Install multikey + copy SN-U29627.EGF C:\Users\Public\EPLAN\Common\ + add reg database: *.reg
6. Copy version.dll C:\Program Files\EPLAN\Platform\2.5.4\Bin\




I don't understand the step 5 - i.e. how to add reg database: *.reg


Top
 Profile  
 
PostPosted: Fri Sep 02, 2016 12:03 pm 

Joined: Tue Aug 14, 2012 3:34 pm
Posts: 4
All above installation instructions are incorrect.
Let's see what it is and how to use it

What it is all about

Starting from Vista/Windows 7 all drivers must have verified by Microsoft digitally signed signature/certificate. This verification is checked twice: when driver is installed and when driver is loaded.

To test drivers in development when still not verified by Microsoft, drivers must have self-verified signature and windows provide two means to test:

1. Boot session with Driver Signature Enforcement disabled in odrder to install driver without signature check.
2. Test Mode. Driver will be loaded without sertificate check.

Boot session with Driver Signature Enforcement disabled should be set manually by:

Win + X > Shut down + Shift > Troubleshoot > Advanced options > Restart > Startup Settings - F7 (Disable driver signature enforcement) > Reboot to Desktop
or
Win + R > shutdown /r /o > OK > Troubleshoot > Advanced options > Restart > Startup Settings - F7 (Disable driver signature enforcement) > Reboot to Desktop

Command:

bcdedit /set loadoptions DDISABLE_INTEGRITY_CHECKS

is deprecated and does not function. There will be Unknown Device in Device Manager and when trying to update there will be error: "The third party INF does not contain digital signature information." which means Driver Signature Enforcement wasn't disabled and driver will not be loaded as it is not installed properly (installation signature check failed).

Command:

bcdedit /set nointegritychecks on

does not function as it requires Secure Boot disabled in BIOS which is not recommended.


Test Mode can be set by cmd commands.

Run cmd as administrator:
Win + X > A

Test Mode On
bcdedit /set testsigning on

Test Mode Off
bcdedit /set testsigning off

Restart
shutdown /r


How to install MultiKey driver.

Do not run install.cmd, no right/left mouse clicks etc. there will be devcon command error.

Install of MultiKey driver by:

1. Set Boot session with Driver Signature Enforcement disabled

2. Open folder where install.cmd is placed and go to:

File Explorer > File menu > Open command prompt > Open command prompt as administrator > install.cmd > Enter

C:\...\MultiKey\64>install.cmd
No devices were removed.
Device node created. Install is complete when drivers are installed...
Updating drivers for root\multikey from C:\...\MultiKey\64\multikey.inf.
Drivers installed successfully.
Press any key to continue . . .

Check driver installation in Device Manager.

Win + X > M > Device Manager > System devices > Virtual USB MultiKey

Device status (in Test Mode + Boot Session Disable Driver signature enforsment)
This device is working properly.

Device status (in Test Mode)
Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)

MultiKey driver is installed properly and can be loaded in Test Mode.
Note: MultiKey driver has self-verified signature and use of Driver Signature Enforcement Overrider (DSEO) tool is not needed.


How to use to install EPLAN

1. Disable Internet connection/antivirus/firewall.
2. Disable UAC (option).
3. Install EPLAN.
4. Set Test Mode.

Win + X > A
bcdedit /set testsigning on

5. Set Boot session with Driver Signature Enforcement disabled:

Win + R > shutdown /r /o > OK > Troubleshoot > Advanced options > Restart > Startup Settings - F7 (Disable driver signature enforcement)

6. Install Sentinel Runtime Environment (...\ELM\Services(x64)\Drivers\HASPUserSetup.exe).
7. Install MultiKey.

File Explorer > ...\MultiKey\64\
File Explorer > File menu > Open command prompt > Open command prompt as administrator > install.cmd > Enter

8. Set EPLAN License:

Copy SN-U10066.EGF to: C:\Users\Public\EPLAN\Common\
Add SN-U10066.reg to registry: SN-U10066.reg > Right-click > Merge

9. Restart.
10. Enable UAC (option).
11. Enable antivirus/firewall.
12. Run EPLAN in Test Mode.

:(


Top
 Profile  
 
PostPosted: Thu Sep 08, 2016 10:18 am 

Joined: Tue Nov 02, 2010 3:37 pm
Posts: 8
With the last update released by Microsoft for OS Windows 10 the Version.dll file not work well and qhen i launch eplan the process is started but the program not open.
If i delete version.dll copied in path C:\Program Files\EPLAN\Platform\2.5.4\Bin\ the eplan starts but the work is impossible because it still lags.
Please Help me!


Top
 Profile  
 
PostPosted: Wed Sep 14, 2016 9:20 am 

Joined: Fri Jul 08, 2016 10:35 am
Posts: 2
http://eplan-eb2.ys168.com/

The web ask for a password!! :shock:

Edit: And now the crack dissapeared... :(


Top
 Profile  
 
PostPosted: Mon Sep 19, 2016 10:09 am 

Joined: Wed Dec 16, 2015 11:17 pm
Posts: 14
hello ,
It is possible to get some running files for crack ?
the chinese site is not running / or show the files .
Thank you in advance for .


Top
 Profile  
 
PostPosted: Wed Oct 12, 2016 2:22 am 

Joined: Wed Oct 12, 2016 2:06 am
Posts: 2
Hi there,

I am trying to install the Eplan Electric P8 2.4.4.8366 with the patch for Eplan Electric and license SN-U10066.EGF but after do all steps and try to run the software, the license manager told me that the dongle is not working fine.

I am try to download the Final version from the Vietnamise website but I don't understand anything.

Any idea?

Thank you so much!!


Top
 Profile  
 
PostPosted: Thu Dec 01, 2016 1:55 pm 

Joined: Thu Dec 01, 2016 1:32 pm
Posts: 2
Hello,

What is the latest version of EPLAN Electric unanimously working with no problems on Windows 10? I don't mind if it's 2.2, 2.3, 2.4 etc, worst case 2.0. Everyone is complaining about something, especially with 2.5, I just want to install a decent version with no lags, no "Test mode" or other nasty things every time I turn the computer on and need to work with EPLAN.

Can you provide with links and instructions?

Thanks.


Top
 Profile  
 
PostPosted: Tue Jun 27, 2017 10:47 am 

Joined: Fri Jul 08, 2016 10:35 am
Posts: 2
Link broken again... :(


Top
 Profile  
 
PostPosted: Thu Jul 27, 2017 4:20 pm 

Joined: Mon Apr 11, 2016 1:13 pm
Posts: 1
hello guys , maybe its not the right place to post , but i am trying to download the eplan P8 v2.4 and i cannot find the link. i have searched the entire forum so far but i cannot find it . if anyone can help by providing it... thanks in advance


Top
 Profile  
 
PostPosted: Tue Aug 01, 2017 10:50 am 

Joined: Sun Jul 03, 2016 11:35 am
Posts: 3
lolcraft wrote:
Hello,

What is the latest version of EPLAN Electric unanimously working with no problems on Windows 10? I don't mind if it's 2.2, 2.3, 2.4 etc, worst case 2.0. Everyone is complaining about something, especially with 2.5, I just want to install a decent version with no lags, no "Test mode" or other nasty things every time I turn the computer on and need to work with EPLAN.

Can you provide with links and instructions?

Thanks.


https://rutracker.org/forum/viewtopic.php?t=5370583 Win10 X64
works well. But a new USB key is needed. You can download it here:
[url]ftp://ftp.cis-app.com/pub/hasp/Sentinel_HASP/Runtime_(Drivers)\7.60\Sentinel_LDK_Run-time_setup.zip[/url]

Patch occurs in the manner described previously.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 150 posts ]  Go to page Previous  1, 2, 3

All times are UTC + 3 hours


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version