Page 1 of 1

automation studio 6.0 x64 professional edition

Posted: Sat Nov 22, 2014 1:58 pm
by zozonon
i have an automation studio 6.0 x64 professional edition install file.
but, i couldn't find the crack file.
please help me....

Re: automation studio 6.0 x64 professional edition

Posted: Wed Oct 07, 2015 8:07 am
by fragolan
Hi there,
could you post some download link for instalation. There is no crack for the software curently, but I have team which could try to make working version

Re: automation studio 6.0 x64 professional edition

Posted: Tue Oct 13, 2015 9:05 pm
by Torteski
Version 6 https://torrentz.eu/8ef7c0cf148e0c335d0 ... f01f66fc33
Version 6.1 x32 http://www.jheberg.net/captcha/pas32izfte61020030/
Version 6.1 x64 http://www.jheberg.net/captcha/pas64izfte61020030/

The first one has some "Crack" but directional valves do not work (software crashes when you try to use it). And Directional controll is 95% of the use for the software. I searched the web for a long time and I am pretty sure there is no working crack for this software. If you make one a lot of people would be very grateful.
There is a working 5.6 student version.
Write if you need any more links, information or any type of help.

Thank you

Re: automation studio 6.0 x64 professional edition

Posted: Fri Dec 11, 2015 8:23 pm
by engmann18
the crack for version 6 is ok but direction valve dont work. what you have to do is to download the library of version 5.2 and open it in the library of version 6 and you can get all the valve from there which work correctly

Re: automation studio 6.0 x64 professional edition

Posted: Tue Jul 03, 2018 1:21 pm
by zolanzs
V6 doesn't have Libraries folder, what files do I need to replace ?
I tried replacing just Main.xml and i see all the valves but can't change them...



Thanks in advance

Re: automation studio 6.0 x64 professional edition

Posted: Tue Jul 03, 2018 5:37 pm
by TheoPap
Try this solution for not working components. Watch the video from 05:22 minute (it's in Spanish but it doesn't matter), download the files for hydraulic,pneumatic,servo components .prx (links are below the video) and do what exactly show. For me it works.

https://www.youtube.com/watch?v=5E-7NFf5NkA&t=165s

Maybe this help you too (but you need the .prx files (link to download below the video)
Solution for not working components (directional valves & servovalves)
Open A.S -> In Library Explorer hit New Library (give a name) -> New category (give a name) -> Open a new project with standard documents and open the folder with working components -> After open select them all and drag and drop in the Library Explorer empty window under defined category name -> Do the same for all working components files -> Last hit Save Library and save them in Catalogues And Libraries as *.prl* files (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries)

Re: automation studio 6.0 x64 professional edition

Posted: Mon Jul 09, 2018 1:29 pm
by zolanzs
Thanks ! (pgood)
Just one more thing, I created and saved *.prl* files but each time I exit Automation Studio and start it again it automatically loads only Main library, and can't load previously created library.

Re: automation studio 6.0 x64 professional edition

Posted: Mon Jul 09, 2018 3:45 pm
by TheoPap
For me it's work and every time i re-open A.S.6.0. the main and the new created library for working components loaded. Follow the steps as described above and in the video and i hope you solve your problem. Save it in the correct path (C:\ProgramData\Famic Technologies\Automation Studio\6.0\Catalogues and Libraries) and rename it as .prl.

Re: automation studio 6.0 x64 professional edition

Posted: Mon Jul 23, 2018 2:24 am
by zdcbetter
Could you tell me the files for hydraulic,pneumatic,servo components .prx download links? thx

Re: automation studio 6.0 x64 professional edition

Posted: Tue Jul 24, 2018 3:41 pm
by whalua
It also happens to me that the created library is not automatically reopened when I relaunch the automation studio.
Also if I try to change the characteristics of a component recovered from the library (for example a 3/2 valve) using the builder, when I try to apply the changes a window appears that tells me that the component is unknown or invalid

Re: automation studio 6.0 x64 professional edition

Posted: Tue Oct 01, 2019 9:57 am
by pakasi
The patch was not programmed well, that is the problem why Directional Valve not appear, if someone wanna try (assumed already patched), look for file named AteHydrcmp.cmp at Automation Studio directory and cut/paste it to anywhere then rename the AteHydrcmp.cmp.BAK (this is the original file) to AteHydrcmp.cmp. unfortunately due to unmatched license between the software and the library it will read as unknown component and make every directional valve symbol as a same symbol. i have been looking for software that could read .cmp file but i not sure i can rewrite it because this is the first time i heard about .cmp, the software name is HotDocs or just google it.

Re: automation studio 6.0 x64 professional edition

Posted: Fri Apr 03, 2020 9:11 am
by Mpkprabhu
In website library files link are not available .if anybody have the library files of hydraulic, pneumatic.please upload in Google drive and share the link of the file .please help me

Re: automation studio 6.0 x64 professional edition

Posted: Mon May 11, 2020 4:38 pm
by vectoroung
please help to share link all brother.

Re: automation studio 6.0 x64 professional edition

Posted: Fri Dec 18, 2020 7:03 pm
by muftah7676
hi all
Solved problem Directional valves Automation Studio 6
https://www.youtube.com/watch?v=BCz0O-usPps
AUTOMATION STUDIO P6 REPAIR VALVES AND VALVE SPOOL DESIGNER ALL IN ONE
Please anyone have original CD send it to me
automation studio P6.0 OR 5.7 Professional Edition
thanks for all

Re: automation studio 6.0 x64 professional edition

Posted: Tue Mar 23, 2021 2:56 am
by ibmacer

Re: automation studio 6.0 x64 professional edition

Posted: Sat May 22, 2021 2:01 pm
by kip_88
Иранцы выложили версию 7.0 на сайте downloadly.ir, только забыли написать что пилюля платная :)

Re: automation studio 6.0 x64 professional edition

Posted: Sun May 23, 2021 3:51 pm
by andreyit
У них же и 6.4 лежит бесплатно, но только x32.

Re: automation studio 6.0 x64 professional edition

Posted: Tue May 25, 2021 1:49 pm
by kip_88
7-я версия тоже бесплатно скачивается, цирк начинается при первом запуске )

Re: automation studio 6.0 x64 professional edition

Posted: Tue May 25, 2021 4:04 pm
by andreyit
Нз. Скачал когда еще отдельно была ссылка на кряк для 6.4. И норм встал. Каталогов\библиотек нет производителей, конечно...

Re: automation studio 6.0 x64 professional edition

Posted: Mon Aug 02, 2021 10:08 pm
by muftah7676

Re: automation studio 6.0 x64 professional edition

Posted: Mon Sep 20, 2021 3:08 pm
by muftah7676

Re: automation studio 6.0 x64 professional edition

Posted: Wed Feb 23, 2022 10:19 pm
by muftah7676
:D :D :D :D :D :D :D :D :D
(pgood) (pgood) (pgood) (pgood)

automation studio p7.0

https://mega.nz/file/4E0wxLiS#aG4_tnDZ6 ... hDR3UqvWFE

Teachware Exercises Catalouge

Re: automation studio 6.0 x64 professional edition

Posted: Tue Jul 05, 2022 12:48 pm
by kostinps
Hello again Muftah76. share please again libraries
links is dead

Re: automation studio 6.0 x64 professional edition

Posted: Wed Jul 05, 2023 5:29 pm
by csiszek

Automation Studio P6.4 (Error while Start-up)

Posted: Sat Jan 27, 2024 6:32 am
by nickzamora907
Hi Guys, can I have your spare time. I'm having trouble on running the Automation Studio.
Please, do you have any ideas or experience encountering these one? Thank you..

BTW Here are some of the Images:

Object Reference not to set to an instance of an object:
https://drive.google.com/file/d/1UbBqa_ ... sp=sharing

System Null Reference:
https://drive.google.com/file/d/1jCLWOT ... sp=sharing

Re: Automation Studio P6.4 (Error while Start-up)

Posted: Sun Jan 28, 2024 8:34 am
by csiszek
hello

i did not remember having any problems like on you photos

try 7.0