[?] Eplan change the posicion of the cross reference contact

обсуждение прочих программных продуктов:
Тools, Elcad, Eplan, ...
Post Reply
bjekas
Posts: 11
Joined: Tue Feb 01, 2011 12:24 pm

[?] Eplan change the posicion of the cross reference contact

Post by bjekas » Tue Oct 23, 2012 6:10 pm

Hello everyone,

Im using Eplan P8 and I have a stupid question... How can I change the posicion of the cross reference contacts?

Image

They are fixed to a Y-posicion and I would like to change this if possible! :)

Thx for your time,
Daniel

van8x10
Posts: 92
Joined: Thu Sep 06, 2007 10:58 am
Location: Vietnam

Re: Eplan question

Post by van8x10 » Tue Oct 23, 2012 7:32 pm

Pls try:
- Right click on the component, select > Properties...
- On tab Display, refer to select listbox <Contact Image:> (None/In Path/On Component); Click button [...] right beside
- Change X or Y position, click OK, then Ok
- Enjoy :wink:

Luca
Posts: 41
Joined: Thu Mar 24, 2011 1:29 pm

Re: [?] Eplan change the posicion of the cross reference con

Post by Luca » Wed Oct 24, 2012 10:39 am

Or right click on cross reference contacts -> "Text" -> "Move property text" and then you can move it freely

van8x10
Posts: 92
Joined: Thu Sep 06, 2007 10:58 am
Location: Vietnam

Re: [?] Eplan change the posicion of the cross reference con

Post by van8x10 » Wed Oct 24, 2012 11:33 am

Luca wrote:Or right click on cross reference contacts -> "Text" -> "Move property text" and then you can move it freely
No, it's not right. The problem is 'contact image', not 'cross reference' for component. Pls see the picture : http://postimage.org/image/d5uuq533l/

bjekas
Posts: 11
Joined: Tue Feb 01, 2011 12:24 pm

Re: [?] Eplan change the posicion of the cross reference con

Post by bjekas » Wed Oct 24, 2012 12:34 pm

Hello van8x10 and Luca.
Just tried out both your suggestions and both worked!
So simple and yet I lost at least 1 hour trying to do this... (h)

Thanks you guys, youre the best (tyou) (tyou) (tyou)

van8x10
Posts: 92
Joined: Thu Sep 06, 2007 10:58 am
Location: Vietnam

Re: [?] Eplan change the posicion of the cross reference con

Post by van8x10 » Thu Oct 25, 2012 3:51 am

I've checked as Luca's suggestion and I'm wong. Sorry to Luca!

Post Reply