Page 1 of 1
[reLink]: National Instruments OPC server
Posted: Tue Dec 07, 2010 3:29 pm
by enrique_gf
Where Can i Find National Instruments OPC server??
Thanks
Re: Request: National Instruments OPC server
Posted: Tue Dec 07, 2010 5:28 pm
by Linkinx64
Re: [reLink]: National Instruments OPC server
Posted: Tue Dec 07, 2010 11:02 pm
by mmohamed15
it is the same as KEPWare Server use it instead
Re: [reLink]: National Instruments OPC server
Posted: Wed Dec 08, 2010 1:02 am
by enrique_gf
Is Kepware free?
Re: [reLink]: National Instruments OPC server
Posted: Wed Dec 08, 2010 12:36 pm
by mmohamed15
no Kepware is not free but you can download the key generator for all Kepware channels from here and enjoy using them check the following link
viewtopic.php?f=3&t=4694&p=6820&hilit=kepware#p6820
good luck
Re: [reLink]: National Instruments OPC server
Posted: Thu Dec 09, 2010 2:08 am
by enrique_gf
What driver should I use to watch variables from a Labview program?
is there no beckhoff twincat driver on kepware?
Re: [reLink]: National Instruments OPC server
Posted: Thu Dec 09, 2010 4:45 pm
by mmohamed15
you can check the list of the available drivers on
www.kepware.com and as much as no there is a driver for Beckhoff TwinCAT I/O