[reLink]: National Instruments OPC server

обсуждение прочих программных продуктов:
Тools, Elcad, Eplan, ...
Post Reply
enrique_gf
Posts: 38
Joined: Fri May 02, 2008 4:41 am
Location: Mexico

[reLink]: National Instruments OPC server

Post by enrique_gf » Tue Dec 07, 2010 3:29 pm

Where Can i Find National Instruments OPC server??

Thanks
Top
Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: Request: National Instruments OPC server

Post by Linkinx64 » Tue Dec 07, 2010 5:28 pm

(gogle)
http://sine.ni.com/nips/cds/view/p/lang/en/nid/11127

Register and download.
Top
mmohamed15
Posts: 24
Joined: Tue Nov 27, 2007 2:59 pm
Location: Egypt

Re: [reLink]: National Instruments OPC server

Post by mmohamed15 » Tue Dec 07, 2010 11:02 pm

it is the same as KEPWare Server use it instead
Top
enrique_gf
Posts: 38
Joined: Fri May 02, 2008 4:41 am
Location: Mexico

Re: [reLink]: National Instruments OPC server

Post by enrique_gf » Wed Dec 08, 2010 1:02 am

Is Kepware free?
Top
mmohamed15
Posts: 24
Joined: Tue Nov 27, 2007 2:59 pm
Location: Egypt

Re: [reLink]: National Instruments OPC server

Post by mmohamed15 » Wed Dec 08, 2010 12:36 pm

no Kepware is not free but you can download the key generator for all Kepware channels from here and enjoy using them check the following link
viewtopic.php?f=3&t=4694&p=6820&hilit=kepware#p6820
good luck :D
Top
enrique_gf
Posts: 38
Joined: Fri May 02, 2008 4:41 am
Location: Mexico

Re: [reLink]: National Instruments OPC server

Post by enrique_gf » Thu Dec 09, 2010 2:08 am

What driver should I use to watch variables from a Labview program?
is there no beckhoff twincat driver on kepware?
Top
mmohamed15
Posts: 24
Joined: Tue Nov 27, 2007 2:59 pm
Location: Egypt

Re: [reLink]: National Instruments OPC server

Post by mmohamed15 » Thu Dec 09, 2010 4:45 pm

you can check the list of the available drivers on www.kepware.com and as much as no there is a driver for Beckhoff TwinCAT I/O
Top
Post Reply

Return to “Other (only about CAD and Soft)”