PLCforum.uz.ua

Hi! someone have this emulated key for Spac Automazione 2010 ?
thanks

please maverik create dump file for spac2010
Please guy426 create emulator for spac2010
Thank you

Crack + keygen for Spac Automazione 2011

Enjoy!

http://www.megaupload.com/?d=0W1LUKV0

Thank you Guy, you are very good

guy426 wrote:Crack + keygen for Spac Automazione 2011

Enjoy!

http://www.megaupload.com/?d=0W1LUKV0

Hi guis426
The Crack + keygen is for spac 2010 or spac 2011

many thanks

djto

Guy426,
Please help me! the installation goes well, but when i run the program, appear a window that say " protection key absent"
How can i do? thank thank you

guy426 wrote:Crack + keygen for Spac Automazione 2011

Enjoy!

http://www.megaupload.com/?d=0W1LUKV0

Dear Guys426

I have installed spac 2011 with success, but when i run the application tells me no hardvare key and the program starts in demo mode you have some suggestion ?
thanks

Djto

Hello Djto, do you have solved the problem?

xblu wrote:Hello Djto, do you have solved the problem?

NO
The Sapc program runs only with the commands of autocd.
The commands of spac are not active because hardware key is not present.

We want the hand of the great GUY426

Djto

Try this new release

http://www.megaupload.com/?d=GBOAFNAZ

guy426 wrote:Try this new release

http://www.megaupload.com/?d=GBOAFNAZ

Hi Guy426
I copied the dvd of spac on hard disk replaced spac.aut with you
executed (SPACAutomazione2011.exe )
execute install.bat for starting dongle emulator
execute key_2011 and insert code (12 char without "-")

After installation Running spac

Message
Hardare key is not correct error #0#

in this case running only autocad command


many thanks for you job

Djto


Sorry Guy426

I copied spac.aut after installation inside directory
spac automazione cad 2011\program\key

The program running OK
you great

Bay

Hello Guy426,the program run very well, thank you for your job, you are great!

guy426 hello, I'll offer my congratulations, great job you're great.

the emulator ask me 12 digit....
but i have 18 digit with 2 space.
what can i doooooooooooo?

guy426 wrote:Try this new release

http://www.megaupload.com/?d=GBOAFNAZ

Hello guy426.
Congratulations for your work.
I want to know if there is the possibility to run the emulator under windows 7 64bit ... I read in web that is possible with the use of the file DevCtrl.exe instead of wdreg.exe...you have any idea about it?
Thanks in advance.

hello guy426
can you create the emulator of SPAC AUTOMAZIONE 2011 for Windows 7 64 bit?
thank you

Installing Spac 2010 by inserting the code visualize this error

because

many thanks

djto

Hello guy426 or anyone who wants to replicate
You have an idea what generates this error
You have tried the version Spac 2010

thanks

Djto

Hello Dito, why don't you install 2011 version? you can download it at www.sdproget.it
this one run perfectly
Hi and hi to guy426

PLEASE GUYS
where can i download Spac Automazione 2011

withot request CD from www.sdproget.it

thx

[url]h++p://w+w.sdproget.it/Download/IsoImage_Download.asp?productID=SPAC%20Automazione%202011[/url]

Hello
I need the module cables (modulo cavi) Spac2011Automazione
Thank you.

xblu wrote:Hello Dito, why don't you install 2011 version? you can download it at http://www.sdproget.it
this one run perfectly
Hi and hi to guy426

Dear all,
I don't succeed in installing + spac automation 2011 on the pc with windows 7 32 bits. The procedure of installation is correctly performed, but when I launch the application, it visualizes the message "key hardware not present. You know how to tell me where I am wrong. The file spac.aut I replace him/it at the end of the installation and later execute the program
thanks

Djto Hello, I tried to install it on 64bit windows7 and did not work, I think that the emulator only works with XP

xblu wrote:Djto Hello, I tried to install it on 64bit windows7 and did not work, I think that the emulator only works with XP

Hello Xblu

I cannot understand why spac 2009 with windows 7 works while the 2010 no my pc has only 1 GByte ram then 2011 i cannot install it. With windows xp pro i can't install any version of spac; when i put the code generated by Keygen tells me that it is wrong i don't understand + nothing
Help me please

The good guy426 will be on summer holidays

Y have a problem.

the driver "eutron" in the windows 7 x64 don't no install
set the "wdreg" with the administrator, y don't no install

i have a lpt1 installed y working.

please help

@ Mesner74
Select Wdreg.exe (C:\Windows\system32\drivers)
With the mouse right button go to Property
Go to TAB Comptibility e select run in Windows Xp SP3 mode.

Install the program.

I have tested on Win 7 32 Bit

in the windows 7 64 bit not work

I have the same problem, on windows 7 64bit and on windows xp.
p.s. the fisically lpt port is missing.
Please somebody help me!!!!

Hello to All

I'd install Spac 2011 and copy *.aut in the key folder, but when I run spac2011 still the message Key Absent

If I check the Key with the Hardware key program Tell me that the key is good

What's wrong?

Thank all

Please Can You Put the links?

The oldest no more working

Thank You

guy426 wrote:Crack + keygen for Spac Automazione 2011
Enjoy!
http://www.megaupload.com/?d=0W1LUKV0

Can You re-post on another file sharing this Crack and Keygen Please?

I'll appreciate that.

Thank You in advance.

guy426 wrote:
Crack + keygen for Spac Automazione 2011
Enjoy!
http://www.megaupload.com/?d=0W1LUKV0

hi guy426, the you posted is not running.
can you please tell us where we could find it, posting an update link?
thank you very much.

I have another question: i tried to install spac automazione 2010 in several pc, beu the installation wizard program tells me, at the first step, that ther is an error of the Date of my pc. and the installation aborts. I tried to change the Date of the system , but nothing changes. can You help me?
the OP i tried with are:
W7 ultimate 64 bit
W7 home edition 64 bit
XP SP3 32 bit

Does anybody have a working cracked spac? 2010 or newer

Hello All,
I need the same think for install Spac Automazione 2010 or 2011.
If somebody have this Crack + keygen I will be very happy.
Thanks in advance.