[?+]: emulator for Spac2009

Link · Post by **Link** » Thu Apr 09, 2009 6:51 am

I have the dump and sys file of working key for spac 2009

Who Help Me to create emulator?

Tank You

DMP and SYS

Link_is_Dead :(/Spa.rar

SPAC 2009
http://www.sdproget.it/software/SPAC_Au ... 2009_8.zip

PLEASE HELP ME

Link · Post by **Link** » Tue Dec 15, 2009 9:39 am

Your dump is encrypted.
Use eu_pbl.exe tool and post correct dump

I have created new dump with eu_pbl.exe.

Link_is_Dead :(/FGZaaaa.rar

Tank You

guy426 · Post by **guy426** » Wed Dec 16, 2009 8:00 am

I cannot try, but i think it works:

key_spac.rar
Link_is_Dead :(/key_spac.rar
or
http://narod.ru/disk/16626485000/key_spac.Link_is_Dead :(
Size: 30 KB

most · Post by **most** » Wed Dec 16, 2009 11:20 pm

guy426 wrote:I cannot try, but i think it works:

installation full does not function because it needs one serial number...
trial installation also does not function because in the end it asks for the activação code
the cr@ck that you made seems to function well but the codes do not work (?)
can you help ?
(perhaps the maverik53 has the serial number)

this is the report of the generated license:
Unique identifier: 6097A573
Key type: PR - Port: LPT (1) - Memory: 64 byte
Serial no: 5139168134

Automazione product versions authorized by the key
-----------------------------------------------
version platform
-----------------------------------------------
2009 Autodesk OEM Engine
2008 Autodesk OEM Engine
No expiry

Modules included in product Automazione
-----------------------------------------------
module version
-----------------------------------------------
Traduttore 2008 (1 licenze)
Traduttore 2009 (1 licenze)
Spac FULL 2008 (1 licenze)
Spac FULL 2009 (1 licenze)
______________________________________________________________

thanks
best regards
most

djto · Post by **djto** » Wed Dec 30, 2009 5:58 pm

Hi maverik53 and guy426 ,
I installed Spac automation 2009 in Trial-Version
I installed SDI
I installed key Spac
the program works only in demo mode
my PC does not have the parallel port
what am I doing wrong

help my please

Many thanks

djto

parappapa · Post by **parappapa** » Thu Dec 31, 2009 1:15 pm

emulator works great with internal program test32.exe but when i install the program with full installation required a serial number

i try my original serial number but is different and give me an error

can you post a working serial number for spac 2009 ?

thx

most · Post by **most** » Mon Jan 04, 2010 12:56 am

GuJack20 wrote:Guys. Happy new year to you all
...have any solution

the installation of spac originates a code in each computer.
the necessary serial number is dependent of this generated code.
the emulator functions well but only in the computer of where dump was taken off

is necessary one keygen, perhaps somebody make it

guy426 · Post by **guy426** » Thu Jan 07, 2010 1:11 pm

GuJack20 wrote:thanks guys

i can confirm that the emulator works fine even with the SPAC2008, but the serial number is still required

Here is working code generator.....

spac2009_keygen.exe
Link_is_Dead :(/spac2009_keygen.exe
or http://narod.ru/disk/16665391000/spac2009_keygen.exe.html

Size: 642 KB

djto · Post by **djto** » Thu Jan 07, 2010 5:46 pm

MareBlu wrote:My Eset Smart Security 4 detects a " variant of Win32/Packed.Themida potentially unwanted application" in file spac2009_keygen.exe.

Please is there someone that have tried this k_eY_GN?

Thanks

It is only a false alarm, you can use the keygen. let me know if it works thanks

djto

GuJack20 · Post by **GuJack20** » Thu Jan 07, 2010 7:19 pm

Thanks guy426 for the keygen.

The keygen does not contain a virus. Its a false alarm..
I only have spac2008, so i will need to download the 2009 version to try the keygen.

GuJack20 · Post by **GuJack20** » Thu Jan 07, 2010 7:21 pm

xblu wrote:can u tell me how keygen work? where can i pick the number to insert in register code? thanks for answer

xblu, when you try to install the full version of Spac, look at the window that pops up after the hardware driver install, in the last sentence you have a code, that code must be insterted in the keygen for it to calculate the correct serial..

djto · Post by **djto** » Thu Jan 07, 2010 8:00 pm

most wrote:it works perfectly, now only it lacks trainings
guy426: you are a great man

best regardes

my laptop not has the parallel port, but has only the USB port. If you install the full version of Spac 2009, also with the drive installed does a ceck the presence of hardware key. Not the Find and I from Error. I gather that the driver emulated does n't work?

best regards
djto

most · Post by **most** » Thu Jan 07, 2010 11:09 pm

djto wrote: my laptop not has the parallel port

I do not have experience in this case

perhaps with a emulator LPT, if to exist... or card PCMCIA

guy426 · Post by **guy426** » Fri Jan 08, 2010 8:27 am

Second msgbox is wrong:
Demo code is CAD code....

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 12:09 pm

Guy426... thanks for everything man.

Everything works fine

Nice job.

What if the computer doesn't have a LPT port?? Can't we crate a virtual one??

djcatalyst · Post by **djcatalyst** » Fri Jan 08, 2010 2:40 pm

HELP PLEASE!
Oh, ive tried to install . something wrong happens

1. start install shield wizard the spac 2009 : I chose full installation
2. next window : i chose local LPT hardwere key (par elel port) , i presset next then i had a window with message: to complete he hardkare key configuration insert the LPT key now then press ok.
Where i can find that key? , how to create ? where to insert ? what means "paralel port"?
how to use the dump file?
so i stand in position that i cant even get to code to insert to keygen that posted here .
3. Then i tried "MiniSPAC" option because i heve installed Autocad electrical , so then the miniSPAC installed with no problems . But when ive started the program there came small window wth requeat code
to active the program. the request code was : "9u0i3k a3xme2 0m2j0a" . so ive thinking may be i will to insert this code to the posted keygen to get activation code but when ive tried i get message: "the number must be muximum 12 digits"

what can i do to active it
can some one write the currect way of actions to install this program?
thanks alot.

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 4:03 pm

djcatalyst wrote:HELP PLEASE!
Oh, ive tried to install . something wrong happens
1. start install shield wizard the spac 2009 : I chose full installation
2. next window : i chose local LPT hardwere key (par elel port) , i presset next then i had a window with message: to complete he hardkare key configuration insert the LPT key now then press ok.
Where i can find that key? , how to create ? where to insert ? what means "paralel port"?
how to use the dump file?
so i stand in position that i cant even get to code to insert to keygen that posted here .
3. Then i tried "MiniSPAC" option because i heve installed Autocad electrical , so then the miniSPAC installed with no problems . But when ive started the program there came small window wth requeat code
to active the program. the request code was : "9u0i3k a3xme2 0m2j0a" . so ive thinking may be i will to insert this code to the posted keygen to get activation code but when ive tried i get message: "the number must be muximum 12 digits"

what can i do to active it
can some one write the currect way of actions to install this program?
thanks alot.

i don't want to be rude, but djcatalyst, are you sure you don't know what a paralel port is??
It's the LPT port, printer port of your computer. Normally Spac 2009 needs a dongle: http://en.wikipedia.org/wiki/Dongle.
To make Spac think that you inserted the dongle the guys here made the emulator posted in the previous posts. Just open and execute it.

xblu · Post by **xblu** » Fri Jan 08, 2010 4:58 pm

thank gujack20 and guy24 too,
but i need one more little help,
have i to install the complete version or 30 days trial?
thanks very much
xblu

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 5:18 pm

The complete version.

1. With the emulator, fake the dongle
2. With the keygenerator, generate dhe registration code from the install code
3. Enjoy the full version

:):)

Greetings go to guy426

xblu · Post by **xblu** » Fri Jan 08, 2010 5:45 pm

Thank you GuJack20
another problem, my pc haven't parallel door, function same?

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 5:51 pm

That is to be seen. I don't know if the setup of SPAC lets you continue without a real LPT port. The emulator instead should function as it does just that, an emulation.

I don't have a Mobo without LPT handly so it's your turn to test and let us know, this way i can inform my many italian friends that asked this same question

xblu · Post by **xblu** » Fri Jan 08, 2010 6:36 pm

Hi GuJack20, While I am installing spac 2009, all of a sudden it tells me to insert the key in hands her parallel, I make ok but it doesn't find her/it to me, I repeat you my pc it is not endowed with parallel door, only of doors USB from the resolve us the probema.....
are ah also me Italian, you of where you are???
Hi and thanks for the disponibilitò

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 7:08 pm

xblu wrote:Hi GuJack20, While I am installing spac 2009, all of a sudden it tells me to insert the key in hands her parallel, I make ok but it doesn't find her/it to me, I repeat you my pc it is not endowed with parallel door, only of doors USB from the resolve us the probema.....
are ah also me Italian, you of where you are???
Hi and thanks for the disponibilitò

Albanese.

I don't think if it is permitted to write in italian here...if yes i will be more than glad to try to help you, writing in your native language

sara un piacere.

Anyway, did you install the emulator?? In the archive of the emulator there is also a leggimi.txt, that's in italian, did you follow the instructions there??

Let me know..

xblu · Post by **xblu** » Fri Jan 08, 2010 7:21 pm

Ciao GuJack20
Provo a scriverti in italiano,
Ti stavo dicendo che mentre stò installando spac 2009, dopo avere intallato l'emulatore, si apre una finestra che dice di inserire la chiave hardware nelle porta parallela digito ok per almeno 3 o 4 volte ma niente non la trova, che posso fare? ti prego aiutami ciao e grazie... ti leggerò domani, ciao e buona notte

GuJack20 · Post by **GuJack20** » Fri Jan 08, 2010 7:34 pm

Capisco

Hai installato l'emulatore?
Lo puoi scaricare da:

Link_is_Dead :(/key_spac.rar
or
http://narod.ru/disk/16626485000/key_spac.Link_is_Dead :(

djcatalyst · Post by **djcatalyst** » Fri Jan 08, 2010 9:20 pm

GuJack20 ; thanx alot for explanation about paralel port , but i still dont get how i make "dongle emulator" ? to emulate the paralel port or to emulate the key on paralel port?
if i have this port or USB , how i use thoes files : eutron.dmp, eutron.sys ?
THANKS AGAIN

GuJack20 · Post by **GuJack20** » Sat Jan 09, 2010 9:47 am

Djcatalyst...inside the archive of the emulator you have install.bat, just execute it..
The emulator is used to emulate the key on the parallel port, as i have written before, i think it should work in a system without physical parallel port, but i don't have such system here to test.

Post here the information from the install.bat window if you still can't install SPAC.

djcatalyst · Post by **djcatalyst** » Sat Jan 09, 2010 1:56 pm

thanks alot GuJack20.
i made that , it works ... but this program more difficult then autocad electrical

xblu · Post by **xblu** » Sat Jan 09, 2010 3:22 pm

Ciao GuJack20,
Ma non esiste in rete qualche software che emula una porta LPT Virtuale?
Grazie sei un amico

GuJack20 · Post by **GuJack20** » Sat Jan 09, 2010 3:42 pm

Ciao xblu.

In windowsXP puoi aggiungere manualmente una porta ECP: Pannello Di controlo -> Aggiungi Nuovo Hardware

Prova se risolve il problema

xblu · Post by **xblu** » Sat Jan 09, 2010 3:57 pm

Ok GuJack20 ti farò sapere, ora sto reinstallando il sistema operativo.
Ciao e grazie di tutto

djto · Post by **djto** » Sat Jan 09, 2010 4:02 pm

I have tried to install Spac 2009 on my laptop without parallel port. result? does n't work. I have installed on my PC with parallel port result? It works! One important thing is to follow the instructions of the great GUY426 before installing Spac.
greetings
djto

ITALIANO
Ho tentato di installare Spac 2009 nel mio laptop senza porta parallela. risultato? Non funziona. Ho installato spac sul mio PC con porta parallela risultato? Funziona!
Una cosa importante: seguite le istruzioni del grande GUY426 prima di installare Spac. saluti
djto

GuJack20 · Post by **GuJack20** » Sat Jan 09, 2010 4:41 pm

Thanks djto for this useful post.

Please can you try to install a ECP port in your laptop through Control Panel -> Add new hardware ??

I really don't think that a REAL parallel port is required...at least i hope that.

Many thanks

djto · Post by **djto** » Sat Jan 09, 2010 11:55 pm

ITALIANO
GuJack20 e xblu
In windows XP ho installato manualmente una porta ECP: Pannello Di controllo -> Aggiungi Nuovo Hardware riavviato il pc installato driver eurotron installato i driver di GUY426
Spac funziona!!!

English
gujack20 and xblu in Windows XP I installed manually a door ECP: Control Panel-> Add New Hardware restart your PC, installed original driver eurotron -installed the drivers of guy426 Spac works!!!

djto

GuJack20 · Post by **GuJack20** » Sun Jan 10, 2010 9:01 am

GREAT!!! I knew it

:):)

Sincerely, i didn't knew it, i just hoped it would work

Thanks djto

xblu · Post by **xblu** » Sun Jan 10, 2010 9:38 am

Ciao GuJaCK20 e djto
OK works for me,
Thank you all for the 'aid

OK funziona anche a me,
Grazie a tutti per l' aiuto

djto · Post by **djto** » Mon Jan 18, 2010 5:32 pm

You know you tell me if in this key emulator is active also module cables?

djto

bkrk · Post by **bkrk** » Fri Feb 26, 2010 4:31 pm

Hi,
i have try so hard to install on my notebook that haven't parallel port, until i have decide to buy a usb to parallel adapter. But it don't work because it don't create a parallel port into windows peripherials until you attach phisically a printer. So, i have an idea, naturally the most simply....

:
1. add a new parallel ecp trought add new hardware(panel control link)
in the windows related peripherial i see the yellows bang, the same problem that i have all time that i try this method..., The ecp port don't start because doesn't phisically exist, so:
2. go to the ecp port, in windows peripherial, select properties->resource and set manually i/o irq dma with the default value that you see in the form.
3. restart
4. install full spac, it install eutron driver
5.launch install.bat( you can find in to key.rar)
6. select ltp hardare key from spac installer
7. use keygen with the number that spac tell you for kay generation
8.complete installation
By bye

Italian wrote:Non comprate un adattatore usb parallelo come ho provato a fare io.....
Se non avete la parallela aggiungetela da nuovo hardware e se andando in gestione periferiche ha il punto esclamativo giallo come è successo a me, andate nelle propietà scegliete risorse e impostate manualmente le risorse che vi propone windows per ogni voce.
Riavvio installa spac full quando ha finito di installare i driver lanciate install.bat date avanti a spac usate il keygen per creare il codice di attivazione usando quello che spac vi dà come codice di richiesta.
Ciao

emmeci85 · Post by **emmeci85** » Mon Mar 01, 2010 9:50 am

Thank you!
everything worked perfectly!
do you work with the version 2010 ?

Italian wrote:Grazie!
funziona tutto perfettamente!
secondo voi funziona con la versione 2010?

Ciao
M.C.

Link · Post by **Link** » Sun May 09, 2010 10:02 am

You can download it from here:
_w++.sdproget.it/software/SPAC_Automazione/Download_File/DVD_SPAC_Automazione_2009_10.zip_

Ciao

Mesner74 · Post by **Mesner74** » Mon Jun 07, 2010 2:29 pm

on this page you can download Spac 2010

http://www.sdproget.it/Download/IsoImag ... one%202010

Can someone kindly create dump files for the new version?

thanks

xblu · Post by **xblu** » Sun Jun 27, 2010 7:35 am

please maverik create dump file for spac2010
Please guy426 create emulator for spac2010
Thank you

maluedo · Post by **maluedo** » Tue Jun 29, 2010 10:06 am

Hi all,
some1 can share Spac Impianti, with Caneco?

Cheers

Wolf81 · Post by **Wolf81** » Wed Jul 28, 2010 5:33 pm

Does someone know if this emulator work even on Windows 7 and, if yes, how to get it working?
I have tried but still have some problems, while everything goes fine with XP, but unfortunally I have W7 in the machine when I need SPAC

Thanks

xblu · Post by **xblu** » Thu Sep 02, 2010 12:03 pm

Ehi! Most help me tank you

mauronicola · Post by **mauronicola** » Thu Oct 07, 2010 6:28 pm

trial and minispac installation also does not function because in the first run asks for the activation code.
I load keygen program but the required number is max 12 digit, my request code is 18 plus 2 space.
The keygen end whit error.

Can help me if possible. and sorry for my bad english.

Mauro

djto · Post by **djto** » Thu Oct 14, 2010 10:12 am

keygen for spac 2009 is not compatible with minispac

bay
djto

mauronicola · Post by **mauronicola** » Thu Oct 14, 2010 8:35 pm

djto wrote:keygen for spac 2009 is not compatible with minispac
djto

All ok

Many thaks

Mauro

xblu · Post by **xblu** » Fri Jan 28, 2011 7:40 pm

Hello to everybody,
I need an information, whi some progams for electrical diagram (eplan), every release are unprotected while spac automazione isn't ?
maybe because have a special protection?
Thanks to everybody

zagor · Post by **zagor** » Thu Jul 07, 2011 8:53 am

hi to everybody, is there anyone that tried to do the Spac installation on a vmware virtual machine (Xp os)? When i try to install Spac appears a message like "operative system not recognized, only wxp, vista... are admitted"....