VNC Viewer for TP1200

[skillerg9]

Hello,
I need to connect from a TP1200 console to a Windows 10 computer to be able to view and control it.
Has anyone used any program on windows CE for that?
Is there any VNC Viewer or Remote desktop RDP application?
Thanks in advanced.

[misa1515]

Hello direct implemented in Siemens Comfort panels.
You need only enable this functionality (in control panel) and set access passwords (read only and read/write).
Then you can run VNC on Windows and access to HMI.

[waynejonstone]

This one is working on almost all Siemens Panels.
http://efonvnc.sourceforge.net/

[skillerg9]

Hello direct implemented in Siemens Comfort panels.
You need only enable this functionality (in control panel) and set access passwords (read only and read/write).
Then you can run VNC on Windows and access to HMI.

I intend to do the opposite, connect from HMI to Windows PC.
Thanks.

[skillerg9]

This one is working on almost all Siemens Panels.
http://efonvnc.sourceforge.net/

I think this is just server and I need the viewer to connect from the HMI to the windows PC.
Tomorrow I will test.
thanks

[waynejonstone]

You´re right this is only for accessing a panel from anywhere.
I usually use it on tablet during commissioning, so I dont have to walk back and forth to the HMI