connect WinCC flex and 313C with PC adapter

ProTool, WinCC flexible, WinCC, PP/OP/TP/TD/MP
Post Reply
Etherlord
Posts: 2
Joined: Thu Jun 30, 2011 6:46 pm

connect WinCC flex and 313C with PC adapter

Post by Etherlord » Thu Aug 11, 2011 9:35 am

setup WinCC flex 2008.
I want connect winCC and PLC.
I execute this step.

1. create new project and check "integrate an S7 project"
Image


2. set interface
Image


3. next and finish.
4. enter in step 7 and push "compile and downlods"
Image
Image

5. I have report
Image


Download Log
Show
Date: 08/11/2011 time: 11:20:40 AM
Compile:
m2_313C\Device_1(1)\Configuration
-> Object was compiled without errors


Date: 08/11/2011 time: 11:20:42 AM
Compile:
m2_313C\master 317\Hardware
-> Object was compiled without errors


Date: 08/11/2011 time: 11:20:45 AM
Compile:
m2_313C\master 317\CPU 313C\S7 Program(2)\Blocks
-> Object was compiled without errors


Date: 08/11/2011 time: 11:21:18 AM
Compile:
m2_313C\master 317\CPU 313C\Connections
-> Object was compiled without errors


Date: 08/11/2011 time: 11:21:29 AM
Compile:
m2_313C\Device_1(1)\WinCC flexible RT
-> Object was compiled without errors


Date: 08/11/2011 time: 11:21:34 AM
Download:
m2_313C\master 317\Hardware
-> Object was downloaded without errors


Date: 08/11/2011 time: 11:21:43 AM
Download:
m2_313C\master 317\CPU 313C\S7 Program(2)\Blocks
-> Object download was executed (with warnings)

Warning: Block 'FC1' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC2' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC10' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC16' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC17' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC18' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'FC19' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'DB10' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'DB11' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'DB12' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'DB13' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'DB17' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'OB1' already exists on the CPU and has not be downloaded as a result.

Warning: Block 'OB35' already exists on the CPU and has not be downloaded as a result.



Date: 08/11/2011 time: 11:21:51 AM
Download:
m2_313C\master 317\CPU 313C\Connections
-> Object was downloaded without errors


Date: 08/11/2011 time: 11:21:52 AM
Download:
m2_313C\Device_1(1)\WinCC flexible RT
-> Error occurred downloading the object

Refer to the log for the single objects for more information.
6. enter in WinCC -> project -> device 1(1) -> communication -> connections. setup address(mpi addr 4) and speed(1.5Mb)
Image
Image


7. create new tag. I want give it addr in DB12.
but I cann't choose it(((((((
Image
Image

what was I don't right??????

And in "connection" I cann't choose station(((((
Image

sania
Site Admin
Posts: 1372
Joined: Sat Aug 13, 2005 6:15 am
Contact:

Re: connect WinCC flex and 313C with PC adapter

Post by sania » Thu Aug 11, 2011 11:53 am

in step7 manager open your hmi station,open hardvare config of hmi(your "Configuration"),open if_port ,connect to mpi,save&compile

Post Reply