Address of simotion d params

Utilites for Simatic Automation
Post Reply
Posts: 2
Joined: Sat Jul 25, 2020 11:08 am

Address of simotion d params

Post by Garrido95 » Wed Sep 02, 2020 1:19 pm

On some forum, I have seen that the address of tag in this devices look like ANY( How can I see this addres in Simotion Scout or simatic manager? For example, I need to read P250 param on Simotion D425 (I use snap7 to do this or WinCC), using STARTER (similar to simotion scout) i can see all the param but without the addres that i mencioned before. Anyone can help me??

Draco Malfoy
Posts: 91
Joined: Mon Sep 23, 2013 10:41 pm

Re: Address of simotion d params

Post by Draco Malfoy » Mon Sep 07, 2020 9:06 am

Dear Sir,

you are completely wrong. The adresses in the format you desribed above, are belonging to the SIMOTION-Tags, witch you declare as "public" and export for example like a Watch-Tab or for using inside of an HMI (TIA or WinCC Flexible). Tags, witch are declared as "private" or "system" you cannot display on HMI or put into a Watch-Tab.

Futhemore, you definitely need the full functionally SCOUT to work with a SIMOTION. Inside of STARTER you can only define the Data Interface to the Drive (i.e. TLG111 + TLG30 or somewhat like that) and make the comissioning of the drive. No more no less.

Post Reply