Page 2 of 7
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Fri May 03, 2013 3:38 pm
by vlad2006gr
To hebel
IMPRESORA pass :
MB13
SELECCION pass:
M13B
Good luck!
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed May 08, 2013 3:43 pm
by bdart
Hello I am new to the forum
I would like to ask for help in unlocking program blocks in the S7-200
I need a password for the data block POU
below for a link to the PLC
Thanks and best regards
sorry for my english
https://dl.dropboxusercontent.com/u/825 ... %20POU.mwp
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu May 09, 2013 7:07 am
by Linkinx64
Scale_EU_Pulse - Q0_1_Stop:
o1Q$
Q0_0_MoveVelocity - Q0_0_Compute_Rate:
o0Q$
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu May 09, 2013 8:05 am
by bdart
Thank you very much, your password works
you are great
Best regards
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon May 20, 2013 2:55 am
by Linkinx64
myrobokits wrote:Hello dear friend
Thanks for doing such a wonder full job please help me recover the POU password for the attached file
Link_is_Dead :(/testproject.mwp
For all POUs:
3132
...except...
EEPROM_Direct:
EDIT
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jun 11, 2013 6:48 am
by chenhf
Dear Sir,
I have subroutine protected for S7-200 program, can you help to unpassword ?
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jun 11, 2013 3:29 pm
by peterg70
Post a link to the program and the passwords will be posted.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Fri Jun 14, 2013 9:26 pm
by solracatc
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Jun 27, 2013 6:35 pm
by farid2002
Hello.
Help please.
I need POU password on project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sun Jun 30, 2013 6:16 pm
by Linkinx64
MBUS_SLAVE:
7SH4
MBUS1:
7SH4
MBUS_INIT:
7SH4
S_ITR:
ACSA
CHILLER_CTRL:
lfso
VALVE_CTRL:
lfso
TRACK_TIME:
lfso
LOAD_CTRL:
lfso
S_RTI:
0606
S_RTR:
0606
MBUS2:
7SH4
NET_EXE:
4G7S
MAIN:
$TKp
Basic_program:
$TKp
Test:
$TKp
Cyl_Pos:
$TKp
Knipper:
$TKp
Hydraulic:
$TKp
In_Out:
$TKp
Integrator:
$TKp
Adaptation:
$TKp
TestKeyCode:
$TKp
WellDetect:
$TKp
CalcSpeed:
$TKp
Copy_Input:
JR59
Calibration:
$TKp
Signal_Translate:
JR58
CalcRC:
$TKp
MIN:
JR59
MAX:
JR59
INT_REAL:
JR59
Correction:
$TKp
INT_0:
$TKp
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Jul 01, 2013 9:05 pm
by farid2002
hi
can you help me for unlock function in wizard folder this project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jul 02, 2013 3:46 pm
by Linkinx64
Sorry, missed these POUs.
PID0_INIT:
9W5K
MOD0_CTRL:
W9F3
PID_EXE:
9W5K
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Fri Jul 05, 2013 5:24 pm
by israeldca
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sun Jul 07, 2013 6:48 pm
by indelhi
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Jul 08, 2013 9:33 am
by Linkinx64
Password
4753 for all POU in "Program Block" section.
Password
7SH4 for all POU in "Program Block\Library" subsection.
Password
4753 for all POU.
israeldca wrote:when I do the correction in the program works fine the problem is when I turn turn off and lose all changes and no longer know what to do
Don't understand what you "turn turn off". Please split your text onto several sentences and describe more details.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jul 09, 2013 2:37 am
by israeldca
ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jul 09, 2013 2:38 am
by Diego Lionel I
Please somebody can help me to unblock this program...
http://www.4shared.com/rar/LwtCQnyJ/soft_contrasea.html
Thanks to all
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jul 09, 2013 2:23 pm
by Linkinx64
Passwords for "Program Block" section:
5219 for all POU
Passwords for "Program Block\Wizard" subsection:
TD_CTRL_1453:
J6R6
TD_ALM_1453:
J6R6
ETH0_CTRL:
J6W8
ETH0_EMAIL:
G6K6
ETH0_FTPC:
G6K6
Passwords for "Data Block\Wizard" subsection:
TD_DATA_1453:
J6R6
ETH0_DATA:
J6W8
Passwords are valid for both CFA1 and CFA2 projects.
Have a nice engineering.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Fri Jul 12, 2013 4:02 pm
by israeldca
hi
ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset
http://www.4shared.com/file/ffaMFp7a/bl ... 62013.html ------modified
http://www.4shared.com/file/-SfvH9zK/bloquera.html --------original
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Jul 30, 2013 6:58 pm
by myrobokits
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Jul 31, 2013 5:00 am
by peterg70
Pass for SBR40 and SBR60 is 3005
All others are 2507
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Jul 31, 2013 3:59 pm
by myrobokits
Thanks a lot
Have a nice day
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Aug 12, 2013 7:20 pm
by tkamrath_1
I have a microwin project where the function blocks are all password protected. I don't know the password. I noticed that some folks have attached their project files and someone else as found out what the passwords are. I would sure appreciate it if someone could do that for me. But I am new to the forum and I don't know how to attach my file to a reply. Can someone help me with this? Thanks.
I figured out a way to post the file. It can be downloaded from the following link :
https://exprogroup.sharefile.com/d/safbeb74945c49829
Thanks.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Aug 13, 2013 1:11 am
by peterg70
Password :
S141 for all 3.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Sep 05, 2013 4:31 pm
by mastersaut
Can anybody send me the password of this project? Tks.
https://dl.dropboxusercontent.com/u/695 ... 3.8.23.mwp
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Sep 18, 2013 12:05 pm
by Valsor
Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.
Here it is:
Link_is_Dead :( ... 75797C572A
Greetings from Poland
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Sep 18, 2013 11:29 pm
by peterg70
Password
AP@L for the MAIN, SBR_0, SBR_1
Password
T&3d for INT_0
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Sep 18, 2013 11:41 pm
by peterg70
unable to download from Rapidshare.
Valsor wrote:Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.
Here it is:
Link_is_Dead :( ... 75797C572A
Greetings from Poland
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Sep 19, 2013 8:25 am
by Valsor
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Sep 19, 2013 2:09 pm
by Linkinx64
--- CPU_N2_NUEVO.mwp ---
PRINCIPAL:
ORIA
TROQUELADOR_ETIQUETA:
ORIA
TROQUELADOR_LINER:
ORIA
MENSAJES:
ORIA
INT_0:
ORIA
USS3:
2BW9
USS_INIT:
2BW9
USS1:
2BW9
USS2:
2BW9
USS_CTRL:
2BW9
USS5:
2BW9
USS6:
2BW9
USS_WPM_R:
2BW9
USS7:
2BW9
USS8:
2BW9
USS9:
2BW9
--- CPU_No1_SERVO.mwp ---
MOD6_CTRL:
W9F3
MOD6_DATA:
W9F3
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Sep 19, 2013 2:34 pm
by Valsor
Thank you very much! U r Awesome:)
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sat Oct 05, 2013 9:23 pm
by Booster4
Hello Linkinx64!!! Help me to remove the step7 microwin POU password!?!!
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sun Oct 06, 2013 9:19 am
by Linkinx64
Program Block:
ghr9 for all POU
Program Block/Wizard:
9W5K for all POU
Program Block/Library:
MBUS_INIT:
7SH4
MBUS_SLAVE:
7SH4
MBUS1:
7SH4
MBUS_CTRL_P1:
DL20
MBUS_MSG_P1:
DL20
MBUSM1_P1:
DL20
MBUS2:
7SH4
MBUS3:
7SH4
MBUSM2_P1:
DL20
Data Block/Wizard:
9W5K for all POU
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sun Oct 06, 2013 9:34 am
by Booster4
Thanks Linkinx64!!! everything works!
You big good fellow and for certain good person! ! !
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Sun Oct 06, 2013 12:57 pm
by CoMod
How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 07, 2013 10:33 am
by Linkinx64
CoMod wrote:How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.
I haven't tried to find a passwords in TIA portal.
Upload the project to let us see what is possible to do.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Oct 15, 2013 6:13 pm
by Corschun-r
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Oct 16, 2013 4:00 am
by Linkinx64
Пароль:
7158 (для всех POU)
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Oct 23, 2013 7:20 pm
by Lans13
Помогите пожалуйста подобрать пароль для проекта S7-200:
http://webfile.ru/badc9752098a611e7896dcba053ef5cb
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Thu Oct 24, 2013 1:43 pm
by peterg70
All POU 3132
EEPROM_Direct Library EDIT
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Fri Oct 25, 2013 5:15 am
by Lans13
peterg70, спасибо!
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 7:58 am
by Ajinkya
To Linkinx64
Please anybody unprotect password of all POUs.
https://www.dropbox.com/s/mnvhbyiymqc6o ... 8Aug13.mwp
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 10:08 am
by Hightower87
Hello. Please help me with the password to POU. In advance thank you very much. Sorry for my English.
http://webfile.ru/33ecb830265442cde81eb4fbefafe016
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 1:40 pm
by wujo3
Hello I am new.
Would You please to read pass of:
https://rs827p3.rapidshare.com/cgi-bin/ ... C715528B63
https://rs996p3.rapidshare.com/cgi-bin/ ... C715528B63
Some are opened by:7SH4 . Is it standard pass for Siemens block?
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 3:12 pm
by peterg70
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 3:30 pm
by peterg70
Program_Block 1234
All other POU passwords are as follows
+L| are the first 3 charactors and the 4th letter is the first letter of the POU
Example
for ABS_Val_0(SBR5) password
+L|A
for RasProc(SBR16) password
+L|R
Wizard
TD_CTRL_7000 J6R6
TD_ALM_7000 J6R6
DAT0_WRITE G0F9
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Mon Oct 28, 2013 3:33 pm
by peterg70
For 2.mwp SCALE_R POU 9754
For 1.mwp POU is either 7SH4 or 9754
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Oct 29, 2013 5:04 am
by Hightower87
peterg70 Thank You, You helped me very much, password approached.
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Tue Oct 29, 2013 10:52 am
by Ajinkya
peterg70 wrote:All POUs %202
Thanks
Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project
Posted: Wed Oct 30, 2013 3:27 pm
by ebolak
Hi all, pls can anybody help me to unpassword protected blocks in following project?
http://www.4shared.com/file/eMbHAUfQ/9056.html