plcforum.uz.ua

International PLC Forum
It is currently Sat Aug 18, 2018 2:33 am

All times are UTC + 3 hours




Post new topic Reply to topic  [ 304 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 7  Next
Author Message
PostPosted: Fri May 03, 2013 6:38 pm 

Joined: Tue Nov 20, 2007 10:08 pm
Posts: 832
Location: Belarus
To hebel
Quote:
Hello.
Help please.
I need POU password on project
http://rapidshare.com/files/1012255058/ ... 120_V1.mwp


IMPRESORA pass : MB13
SELECCION pass: M13B
Good luck!


Top
 Profile  
 
PostPosted: Wed May 08, 2013 6:43 pm 

Joined: Wed May 08, 2013 6:33 pm
Posts: 2
Hello I am new to the forum
I would like to ask for help in unlocking program blocks in the S7-200
I need a password for the data block POU
below for a link to the PLC

Thanks and best regards

sorry for my english

https://dl.dropboxusercontent.com/u/825 ... %20POU.mwp


Top
 Profile  
 
PostPosted: Thu May 09, 2013 10:07 am 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
bdart wrote:
https://dl.dropboxusercontent.com/u/82540847/PLC%20soft%20password%20POU.mwp

Scale_EU_Pulse - Q0_1_Stop: o1Q$
Q0_0_MoveVelocity - Q0_0_Compute_Rate: o0Q$


Top
 Profile  
 
PostPosted: Thu May 09, 2013 11:05 am 

Joined: Wed May 08, 2013 6:33 pm
Posts: 2
Thank you very much, your password works
you are great

Best regards


Top
 Profile  
 
PostPosted: Mon May 20, 2013 5:55 am 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
myrobokits wrote:
Hello dear friend (sdoc)

Thanks for doing such a wonder full job please help me recover the POU password for the attached file
http://rapidshare.com/files/3499832458/testproject.mwp

For all POUs: 3132
...except...
EEPROM_Direct: EDIT


Top
 Profile  
 
PostPosted: Tue Jun 11, 2013 9:48 am 

Joined: Thu Apr 08, 2010 11:21 am
Posts: 3
Dear Sir,
I have subroutine protected for S7-200 program, can you help to unpassword ?


Top
 Profile  
 
PostPosted: Tue Jun 11, 2013 6:29 pm 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Post a link to the program and the passwords will be posted.


Top
 Profile  
 
PostPosted: Sat Jun 15, 2013 12:26 am 

Joined: Sat Jun 15, 2013 12:08 am
Posts: 1
Can u help me to unprotect the subroutines

https://docs.google.com/file/d/0B27gj_t ... sp=sharing

thanks


Top
 Profile  
 
PostPosted: Thu Jun 27, 2013 9:35 pm 

Joined: Mon Jul 24, 2006 7:06 pm
Posts: 7
Hello.
Help please.
I need POU password on project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci


Top
 Profile  
 
PostPosted: Sun Jun 30, 2013 9:16 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
solracatc wrote:
Can u help me to unprotect the subroutines

https://docs.google.com/file/d/0B27gj_t ... sp=sharing

thanks

MBUS_SLAVE: 7SH4
MBUS1: 7SH4
MBUS_INIT: 7SH4
S_ITR: ACSA
CHILLER_CTRL: lfso
VALVE_CTRL: lfso
TRACK_TIME: lfso
LOAD_CTRL: lfso
S_RTI: 0606
S_RTR: 0606
MBUS2: 7SH4
NET_EXE: 4G7S

farid2002 wrote:
Hello.
Help please.
I need POU password on project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci

MAIN: $TKp
Basic_program: $TKp
Test: $TKp
Cyl_Pos: $TKp
Knipper: $TKp
Hydraulic: $TKp
In_Out: $TKp
Integrator: $TKp
Adaptation: $TKp
TestKeyCode: $TKp
WellDetect: $TKp
CalcSpeed: $TKp
Copy_Input: JR59
Calibration: $TKp
Signal_Translate: JR58
CalcRC: $TKp
MIN: JR59
MAX: JR59
INT_REAL: JR59
Correction: $TKp
INT_0: $TKp


Top
 Profile  
 
PostPosted: Tue Jul 02, 2013 12:05 am 

Joined: Mon Jul 24, 2006 7:06 pm
Posts: 7
hi
can you help me for unlock function in wizard folder this project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci


Top
 Profile  
 
PostPosted: Tue Jul 02, 2013 6:46 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
farid2002 wrote:
can you help me for unlock function in wizard folder this project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb

Sorry, missed these POUs.

PID0_INIT: 9W5K
MOD0_CTRL: W9F3
PID_EXE: 9W5K


Top
 Profile  
 
PostPosted: Fri Jul 05, 2013 8:24 pm 

Joined: Fri Mar 29, 2013 11:26 pm
Posts: 6
I have problems with this program and unblock it but when I do the correction in the program works fine the problem is when I turn turn off and lose all changes and no longer know what to do : ( plissss help meee plsss


http://www.4shared.com/file/ffaMFp7a/bl ... 62013.html ------modified
http://www.4shared.com/file/-SfvH9zK/bloquera.html --------original


(h) (h) (sos) (sos) (sos) (sos) (sos) (sos) (sos) (sos) (h) (h)


Top
 Profile  
 
PostPosted: Sun Jul 07, 2013 9:48 pm 

Joined: Fri Jan 02, 2009 6:52 pm
Posts: 15
Location: India
To Linkinx64
Please unpassword these 2 projects. Thanks in advance.
http://www.4shared.com/file/_hAZGQWW/okhd.html
http://www.4shared.com/file/Qggai1ZA/kamd.html


Top
 Profile  
 
PostPosted: Mon Jul 08, 2013 12:33 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Quote:
http://www.4shared.com/file/_hAZGQWW/okhd.html
Password 4753 for all POU in "Program Block" section.
Password 7SH4 for all POU in "Program Block\Library" subsection.

Quote:
http://www.4shared.com/file/Qggai1ZA/kamd.html
Password 4753 for all POU.

israeldca wrote:
when I do the correction in the program works fine the problem is when I turn turn off and lose all changes and no longer know what to do

Don't understand what you "turn turn off". Please split your text onto several sentences and describe more details.


Top
 Profile  
 
PostPosted: Tue Jul 09, 2013 5:37 am 

Joined: Fri Mar 29, 2013 11:26 pm
Posts: 6
ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset

(sos) (sos) (sos) (sos) (sos) (sos)


Top
 Profile  
 
PostPosted: Tue Jul 09, 2013 5:38 am 

Joined: Tue Jul 09, 2013 5:27 am
Posts: 1
Please somebody can help me to unblock this program...


http://www.4shared.com/rar/LwtCQnyJ/soft_contrasea.html


Thanks to all


Top
 Profile  
 
PostPosted: Tue Jul 09, 2013 5:23 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Diego Lionel I wrote:
http://www.4shared.com/rar/LwtCQnyJ/soft_contrasea.html
Passwords for "Program Block" section:
5219 for all POU

Passwords for "Program Block\Wizard" subsection:
TD_CTRL_1453: J6R6
TD_ALM_1453: J6R6
ETH0_CTRL: J6W8
ETH0_EMAIL: G6K6
ETH0_FTPC: G6K6

Passwords for "Data Block\Wizard" subsection:
TD_DATA_1453: J6R6
ETH0_DATA: J6W8

Passwords are valid for both CFA1 and CFA2 projects.

Have a nice engineering.


Top
 Profile  
 
PostPosted: Fri Jul 12, 2013 7:02 pm 

Joined: Fri Mar 29, 2013 11:26 pm
Posts: 6
hi :(
ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset

(h) (h) (sos) (sos) (sos) (sos) (sos) (sos) (h) (h)


http://www.4shared.com/file/ffaMFp7a/bl ... 62013.html ------modified
http://www.4shared.com/file/-SfvH9zK/bloquera.html --------original


Top
 Profile  
 
PostPosted: Tue Jul 30, 2013 9:58 pm 

Joined: Mon Apr 15, 2013 11:34 pm
Posts: 7
:D (sdoc) (sos) (sos) (sos) (sos)

Dear Friend,
Please help me know the subroutines password,Thanks in advance

http://rapidshare.com/files/2873682208/Tibo-0538.mwp
(tyou)


Top
 Profile  
 
PostPosted: Wed Jul 31, 2013 8:00 am 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Pass for SBR40 and SBR60 is 3005
All others are 2507
myrobokits wrote:
Please help me know the subroutines password,Thanks in advance
http://rapidshare.com/files/2873682208/Tibo-0538.mwp


Top
 Profile  
 
PostPosted: Wed Jul 31, 2013 6:59 pm 

Joined: Mon Apr 15, 2013 11:34 pm
Posts: 7
Thanks a lot (tyou) (suc)
Have a nice day (clap)


Top
 Profile  
 
PostPosted: Mon Aug 12, 2013 10:20 pm 

Joined: Mon Aug 12, 2013 5:28 pm
Posts: 1
I have a microwin project where the function blocks are all password protected. I don't know the password. I noticed that some folks have attached their project files and someone else as found out what the passwords are. I would sure appreciate it if someone could do that for me. But I am new to the forum and I don't know how to attach my file to a reply. Can someone help me with this? Thanks.


I figured out a way to post the file. It can be downloaded from the following link :
https://exprogroup.sharefile.com/d/safbeb74945c49829

Thanks.


Top
 Profile  
 
PostPosted: Tue Aug 13, 2013 4:11 am 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Password : S141 for all 3.

tkamrath_1 wrote:
I figured out a way to post the file. It can be downloaded from the following link :
https://exprogroup.sharefile.com/d/safbeb74945c49829

Thanks.


Top
 Profile  
 
PostPosted: Thu Sep 05, 2013 7:31 pm 

Joined: Thu Sep 05, 2013 7:26 pm
Posts: 1
Can anybody send me the password of this project? Tks.

https://dl.dropboxusercontent.com/u/695 ... 3.8.23.mwp


Top
 Profile  
 
PostPosted: Wed Sep 18, 2013 3:05 pm 

Joined: Wed Sep 18, 2013 12:46 pm
Posts: 3
Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.

Here it is: http://rapidshare.com/share/79085F0D3CCFA70B6009E875797C572A

Greetings from Poland :)


Top
 Profile  
 
PostPosted: Thu Sep 19, 2013 2:29 am 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Password AP@L for the MAIN, SBR_0, SBR_1
Password T&3d for INT_0

mastersaut wrote:
Can anybody send me the password of this project? Tks.

https://dl.dropboxusercontent.com/u/695 ... 3.8.23.mwp


Top
 Profile  
 
PostPosted: Thu Sep 19, 2013 2:41 am 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
unable to download from Rapidshare.

Valsor wrote:
Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.

Here it is: http://rapidshare.com/share/79085F0D3CCFA70B6009E875797C572A

Greetings from Poland :)


Top
 Profile  
 
PostPosted: Thu Sep 19, 2013 11:25 am 

Joined: Wed Sep 18, 2013 12:46 pm
Posts: 3
It's weird, Rapid totally dead.
Here u go new up:
http://www.4shared.com/file/SZEJrhe6/CPU_N2_NUEVO.html
http://www.4shared.com/file/rkyeNvSF/CPU_No1_SERVO.html
Ty for quick respond.


Top
 Profile  
 
PostPosted: Thu Sep 19, 2013 5:09 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Valsor wrote:


--- CPU_N2_NUEVO.mwp ---
PRINCIPAL: ORIA
TROQUELADOR_ETIQUETA: ORIA
TROQUELADOR_LINER: ORIA
MENSAJES: ORIA
INT_0: ORIA
USS3: 2BW9
USS_INIT: 2BW9
USS1: 2BW9
USS2: 2BW9
USS_CTRL: 2BW9
USS5: 2BW9
USS6: 2BW9
USS_WPM_R: 2BW9
USS7: 2BW9
USS8: 2BW9
USS9: 2BW9

--- CPU_No1_SERVO.mwp ---
MOD6_CTRL: W9F3
MOD6_DATA: W9F3


Top
 Profile  
 
PostPosted: Thu Sep 19, 2013 5:34 pm 

Joined: Wed Sep 18, 2013 12:46 pm
Posts: 3
Thank you very much! U r Awesome:)


Top
 Profile  
 
PostPosted: Sun Oct 06, 2013 12:23 am 

Joined: Sat Oct 05, 2013 11:55 pm
Posts: 3
Hello Linkinx64!!! Help me to remove the step7 microwin POU password!?!!


Last edited by Booster4 on Sun Oct 06, 2013 1:07 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Sun Oct 06, 2013 12:19 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Booster4 wrote:
Hello Linkinx64!!! Help me to remove the step7 microwin POU password!?!! http://yadi.sk/d/TqHry0LZASY89

Program Block: ghr9 for all POU

Program Block/Wizard: 9W5K for all POU

Program Block/Library:
MBUS_INIT: 7SH4
MBUS_SLAVE: 7SH4
MBUS1: 7SH4
MBUS_CTRL_P1: DL20
MBUS_MSG_P1: DL20
MBUSM1_P1: DL20
MBUS2: 7SH4
MBUS3: 7SH4
MBUSM2_P1: DL20

Data Block/Wizard: 9W5K for all POU


Top
 Profile  
 
PostPosted: Sun Oct 06, 2013 12:34 pm 

Joined: Sat Oct 05, 2013 11:55 pm
Posts: 3
Thanks Linkinx64!!! everything works!
You big good fellow and for certain good person! ! ! (pgood)


Top
 Profile  
 
PostPosted: Sun Oct 06, 2013 3:57 pm 
Site Admin

Joined: Thu Feb 16, 2006 6:25 pm
Posts: 3310
Location: Russia
How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.


Top
 Profile  
 
PostPosted: Mon Oct 07, 2013 1:33 pm 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
CoMod wrote:
How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.

I haven't tried to find a passwords in TIA portal.
Upload the project to let us see what is possible to do.


Top
 Profile  
 
PostPosted: Tue Oct 15, 2013 9:13 pm 

Joined: Tue Oct 15, 2013 8:52 pm
Posts: 7
Location: Тульская область
Помогите пожалуста
Срочно нужен пароль для проектов S7-200

http://webfile.ru/f67b57b6111642eacfc77e8dbf642a5c


http://webfile.ru/cef9c0ac72ac436895d7feacdd3f50f4

Заранее Спасибо


Top
 Profile  
 
PostPosted: Wed Oct 16, 2013 7:00 am 

Joined: Sun Apr 11, 2010 6:00 am
Posts: 894
Location: Russia
Corschun-r wrote:
Пароль: 7158 (для всех POU)


Top
 Profile  
 
PostPosted: Wed Oct 23, 2013 10:20 pm 

Joined: Fri Aug 06, 2010 8:13 am
Posts: 2
Помогите пожалуйста подобрать пароль для проекта S7-200:
http://webfile.ru/badc9752098a611e7896dcba053ef5cb


Top
 Profile  
 
PostPosted: Thu Oct 24, 2013 4:43 pm 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
All POU 3132
EEPROM_Direct Library EDIT


Top
 Profile  
 
PostPosted: Fri Oct 25, 2013 8:15 am 

Joined: Fri Aug 06, 2010 8:13 am
Posts: 2
peterg70, спасибо! (pgood) (tyou)


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 10:58 am 

Joined: Mon Oct 28, 2013 10:43 am
Posts: 2
To Linkinx64

Please anybody unprotect password of all POUs.

https://www.dropbox.com/s/mnvhbyiymqc6o2s/IR202_18Aug13.mwp


Last edited by Ajinkya on Mon Oct 28, 2013 4:07 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 1:08 pm 

Joined: Mon Oct 28, 2013 1:01 pm
Posts: 2
Hello. Please help me with the password to POU. In advance thank you very much. Sorry for my English. http://webfile.ru/33ecb830265442cde81eb4fbefafe016


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 4:40 pm 

Joined: Mon Oct 28, 2013 12:43 pm
Posts: 1
(welc)

Hello I am new.
Would You please to read pass of:

https://rs827p3.rapidshare.com/cgi-bin/ ... C715528B63

https://rs996p3.rapidshare.com/cgi-bin/ ... C715528B63

Some are opened by:7SH4 . Is it standard pass for Siemens block?


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 6:12 pm 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Ajinkya wrote:
Please anybody unprotect password of all POUs.

https://www.dropbox.com/s/mnvhbyiymqc6o2s/IR202_18Aug13.mwp


All POUs %202


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 6:30 pm 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
Hightower87 wrote:
Hello. Please help me with the password to POU. In advance thank you very much. Sorry for my English. http://webfile.ru/33ecb830265442cde81eb4fbefafe016


Program_Block 1234
All other POU passwords are as follows
+L| are the first 3 charactors and the 4th letter is the first letter of the POU
Example
for ABS_Val_0(SBR5) password +L|A
for RasProc(SBR16) password +L|R

Wizard
TD_CTRL_7000 J6R6
TD_ALM_7000 J6R6
DAT0_WRITE G0F9


Top
 Profile  
 
PostPosted: Mon Oct 28, 2013 6:33 pm 

Joined: Tue Apr 12, 2011 4:44 pm
Posts: 121
wujo3 wrote:
Would You please to read pass of:

https://rs827p3.rapidshare.com/cgi-bin/ ... C715528B63

https://rs996p3.rapidshare.com/cgi-bin/ ... C715528B63

Some are opened by:7SH4 . Is it standard pass for Siemens block?

For 2.mwp SCALE_R POU 9754
For 1.mwp POU is either 7SH4 or 9754


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 8:04 am 

Joined: Mon Oct 28, 2013 1:01 pm
Posts: 2
peterg70 Thank You, You helped me very much, password approached.


Top
 Profile  
 
PostPosted: Tue Oct 29, 2013 1:52 pm 

Joined: Mon Oct 28, 2013 10:43 am
Posts: 2
peterg70 wrote:
All POUs %202


Thanks (tyou)


Top
 Profile  
 
PostPosted: Wed Oct 30, 2013 6:27 pm 

Joined: Mon Dec 19, 2011 5:46 pm
Posts: 1
Hi all, pls can anybody help me to unpassword protected blocks in following project?

http://www.4shared.com/file/eMbHAUfQ/9056.html


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 304 posts ]  Go to page Previous  1, 2, 3, 4, 5 ... 7  Next

All times are UTC + 3 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by International PLCforum® Forum Software © PLCforum
Mobile version