[?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Utilites for Simatic Automation
vlad2006gr
Posts: 1032
Joined: Tue Nov 20, 2007 7:08 pm
Location: Belarus

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by vlad2006gr » Fri May 03, 2013 3:38 pm

To hebel
Hello.
Help please.
I need POU password on project
Link_is_Dead :(/ ... 120_V1.mwp
IMPRESORA pass : MB13
SELECCION pass: M13B
Good luck!

bdart
Posts: 2
Joined: Wed May 08, 2013 3:33 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by bdart » Wed May 08, 2013 3:43 pm

Hello I am new to the forum
I would like to ask for help in unlocking program blocks in the S7-200
I need a password for the data block POU
below for a link to the PLC

Thanks and best regards

sorry for my english

https://dl.dropboxusercontent.com/u/825 ... %20POU.mwp

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Thu May 09, 2013 7:07 am

Scale_EU_Pulse - Q0_1_Stop: o1Q$
Q0_0_MoveVelocity - Q0_0_Compute_Rate: o0Q$

bdart
Posts: 2
Joined: Wed May 08, 2013 3:33 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by bdart » Thu May 09, 2013 8:05 am

Thank you very much, your password works
you are great

Best regards

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Mon May 20, 2013 2:55 am

myrobokits wrote:Hello dear friend (sdoc)

Thanks for doing such a wonder full job please help me recover the POU password for the attached file
Link_is_Dead :(/testproject.mwp
For all POUs: 3132
...except...
EEPROM_Direct: EDIT

chenhf
Posts: 3
Joined: Thu Apr 08, 2010 8:21 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by chenhf » Tue Jun 11, 2013 6:48 am

Dear Sir,
I have subroutine protected for S7-200 program, can you help to unpassword ?

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Tue Jun 11, 2013 3:29 pm

Post a link to the program and the passwords will be posted.

solracatc
Posts: 1
Joined: Fri Jun 14, 2013 9:08 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by solracatc » Fri Jun 14, 2013 9:26 pm

Can u help me to unprotect the subroutines

https://docs.google.com/file/d/0B27gj_t ... sp=sharing

thanks

farid2002
Posts: 7
Joined: Mon Jul 24, 2006 4:06 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by farid2002 » Thu Jun 27, 2013 6:35 pm

Hello.
Help please.
I need POU password on project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Sun Jun 30, 2013 6:16 pm

solracatc wrote:Can u help me to unprotect the subroutines

https://docs.google.com/file/d/0B27gj_t ... sp=sharing

thanks
MBUS_SLAVE: 7SH4
MBUS1: 7SH4
MBUS_INIT: 7SH4
S_ITR: ACSA
CHILLER_CTRL: lfso
VALVE_CTRL: lfso
TRACK_TIME: lfso
LOAD_CTRL: lfso
S_RTI: 0606
S_RTR: 0606
MBUS2: 7SH4
NET_EXE: 4G7S
farid2002 wrote:Hello.
Help please.
I need POU password on project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci
MAIN: $TKp
Basic_program: $TKp
Test: $TKp
Cyl_Pos: $TKp
Knipper: $TKp
Hydraulic: $TKp
In_Out: $TKp
Integrator: $TKp
Adaptation: $TKp
TestKeyCode: $TKp
WellDetect: $TKp
CalcSpeed: $TKp
Copy_Input: JR59
Calibration: $TKp
Signal_Translate: JR58
CalcRC: $TKp
MIN: JR59
MAX: JR59
INT_REAL: JR59
Correction: $TKp
INT_0: $TKp

farid2002
Posts: 7
Joined: Mon Jul 24, 2006 4:06 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by farid2002 » Mon Jul 01, 2013 9:05 pm

hi
can you help me for unlock function in wizard folder this project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
merci

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Tue Jul 02, 2013 3:46 pm

farid2002 wrote:can you help me for unlock function in wizard folder this project
http://www.uplooder.net/cgi-bin/dl.cgi? ... ecc980e4bb
Sorry, missed these POUs.

PID0_INIT: 9W5K
MOD0_CTRL: W9F3
PID_EXE: 9W5K

israeldca
Posts: 6
Joined: Fri Mar 29, 2013 8:26 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by israeldca » Fri Jul 05, 2013 5:24 pm

I have problems with this program and unblock it but when I do the correction in the program works fine the problem is when I turn turn off and lose all changes and no longer know what to do : ( plissss help meee plsss


http://www.4shared.com/file/ffaMFp7a/bl ... 62013.html ------modified
http://www.4shared.com/file/-SfvH9zK/bloquera.html --------original


(h) (h) (sos) (sos) (sos) (sos) (sos) (sos) (sos) (sos) (h) (h)

indelhi
Posts: 15
Joined: Fri Jan 02, 2009 3:52 pm
Location: India

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by indelhi » Sun Jul 07, 2013 6:48 pm

To Linkinx64
Please unpassword these 2 projects. Thanks in advance.
http://www.4shared.com/file/_hAZGQWW/okhd.html
http://www.4shared.com/file/Qggai1ZA/kamd.html

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Mon Jul 08, 2013 9:33 am

Password 4753 for all POU in "Program Block" section.
Password 7SH4 for all POU in "Program Block\Library" subsection.
Password 4753 for all POU.
israeldca wrote:when I do the correction in the program works fine the problem is when I turn turn off and lose all changes and no longer know what to do
Don't understand what you "turn turn off". Please split your text onto several sentences and describe more details.

israeldca
Posts: 6
Joined: Fri Mar 29, 2013 8:26 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by israeldca » Tue Jul 09, 2013 2:37 am

ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset

(sos) (sos) (sos) (sos) (sos) (sos)

Diego Lionel I
Posts: 1
Joined: Tue Jul 09, 2013 2:27 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Diego Lionel I » Tue Jul 09, 2013 2:38 am

Please somebody can help me to unblock this program...


http://www.4shared.com/rar/LwtCQnyJ/soft_contrasea.html


Thanks to all

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Tue Jul 09, 2013 2:23 pm

Passwords for "Program Block" section:
5219 for all POU

Passwords for "Program Block\Wizard" subsection:
TD_CTRL_1453: J6R6
TD_ALM_1453: J6R6
ETH0_CTRL: J6W8
ETH0_EMAIL: G6K6
ETH0_FTPC: G6K6

Passwords for "Data Block\Wizard" subsection:
TD_DATA_1453: J6R6
ETH0_DATA: J6W8

Passwords are valid for both CFA1 and CFA2 projects.

Have a nice engineering.

israeldca
Posts: 6
Joined: Fri Mar 29, 2013 8:26 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by israeldca » Fri Jul 12, 2013 4:02 pm

hi :(
ok I have a Siemens PLC S7-200 CPU 226
has a burned out (Q0.1)
(Q1.1 output has a function but does not affect the program)
Q1.1 replacement for the Q0.1
works and does everything
but when I disconnect the source plc
automatically returns the old program and reactivated the output Q0.1
and do not know why the program is reset

(h) (h) (sos) (sos) (sos) (sos) (sos) (sos) (h) (h)


http://www.4shared.com/file/ffaMFp7a/bl ... 62013.html ------modified
http://www.4shared.com/file/-SfvH9zK/bloquera.html --------original

myrobokits
Posts: 7
Joined: Mon Apr 15, 2013 8:34 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by myrobokits » Tue Jul 30, 2013 6:58 pm

:D (sdoc) (sos) (sos) (sos) (sos)

Dear Friend,
Please help me know the subroutines password,Thanks in advance

Link_is_Dead :(/Tibo-0538.mwp
(tyou)

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Wed Jul 31, 2013 5:00 am

Pass for SBR40 and SBR60 is 3005
All others are 2507
myrobokits wrote:Please help me know the subroutines password,Thanks in advance
Link_is_Dead :(/Tibo-0538.mwp

myrobokits
Posts: 7
Joined: Mon Apr 15, 2013 8:34 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by myrobokits » Wed Jul 31, 2013 3:59 pm

Thanks a lot (tyou) (suc)
Have a nice day (clap)

tkamrath_1
Posts: 1
Joined: Mon Aug 12, 2013 2:28 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by tkamrath_1 » Mon Aug 12, 2013 7:20 pm

I have a microwin project where the function blocks are all password protected. I don't know the password. I noticed that some folks have attached their project files and someone else as found out what the passwords are. I would sure appreciate it if someone could do that for me. But I am new to the forum and I don't know how to attach my file to a reply. Can someone help me with this? Thanks.


I figured out a way to post the file. It can be downloaded from the following link :
https://exprogroup.sharefile.com/d/safbeb74945c49829

Thanks.

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Tue Aug 13, 2013 1:11 am

Password : S141 for all 3.
tkamrath_1 wrote:I figured out a way to post the file. It can be downloaded from the following link :
https://exprogroup.sharefile.com/d/safbeb74945c49829

Thanks.

mastersaut
Posts: 1
Joined: Thu Sep 05, 2013 4:26 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by mastersaut » Thu Sep 05, 2013 4:31 pm

Can anybody send me the password of this project? Tks.

https://dl.dropboxusercontent.com/u/695 ... 3.8.23.mwp

Valsor
Posts: 3
Joined: Wed Sep 18, 2013 9:46 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Valsor » Wed Sep 18, 2013 12:05 pm

Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.

Here it is: Link_is_Dead :( ... 75797C572A

Greetings from Poland :)

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Wed Sep 18, 2013 11:29 pm

Password AP@L for the MAIN, SBR_0, SBR_1
Password T&3d for INT_0
mastersaut wrote:Can anybody send me the password of this project? Tks.

https://dl.dropboxusercontent.com/u/695 ... 3.8.23.mwp

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Wed Sep 18, 2013 11:41 pm

unable to download from Rapidshare.
Valsor wrote:Hi,
pls check passwords from this 2 project for me. (USS blocks pass i already have).
It's very important to me to get it as soon as possible.

Here it is: Link_is_Dead :( ... 75797C572A

Greetings from Poland :)

Valsor
Posts: 3
Joined: Wed Sep 18, 2013 9:46 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Valsor » Thu Sep 19, 2013 8:25 am

It's weird, Rapid totally dead.
Here u go new up:
http://www.4shared.com/file/SZEJrhe6/CPU_N2_NUEVO.html
http://www.4shared.com/file/rkyeNvSF/CPU_No1_SERVO.html
Ty for quick respond.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Thu Sep 19, 2013 2:09 pm

Valsor wrote:It's weird, Rapid totally dead.
Here u go new up:
http://www.4shared.com/file/SZEJrhe6/CPU_N2_NUEVO.html
http://www.4shared.com/file/rkyeNvSF/CPU_No1_SERVO.html
Ty for quick respond.
--- CPU_N2_NUEVO.mwp ---
PRINCIPAL: ORIA
TROQUELADOR_ETIQUETA: ORIA
TROQUELADOR_LINER: ORIA
MENSAJES: ORIA
INT_0: ORIA
USS3: 2BW9
USS_INIT: 2BW9
USS1: 2BW9
USS2: 2BW9
USS_CTRL: 2BW9
USS5: 2BW9
USS6: 2BW9
USS_WPM_R: 2BW9
USS7: 2BW9
USS8: 2BW9
USS9: 2BW9

--- CPU_No1_SERVO.mwp ---
MOD6_CTRL: W9F3
MOD6_DATA: W9F3

Valsor
Posts: 3
Joined: Wed Sep 18, 2013 9:46 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Valsor » Thu Sep 19, 2013 2:34 pm

Thank you very much! U r Awesome:)

Booster4
Posts: 4
Joined: Sat Oct 05, 2013 8:55 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Booster4 » Sat Oct 05, 2013 9:23 pm

Hello Linkinx64!!! Help me to remove the step7 microwin POU password!?!!
Last edited by Booster4 on Sun Oct 06, 2013 10:07 am, edited 1 time in total.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Sun Oct 06, 2013 9:19 am

Booster4 wrote:Hello Linkinx64!!! Help me to remove the step7 microwin POU password!?!! http://yadi.sk/d/TqHry0LZASY89
Program Block: ghr9 for all POU

Program Block/Wizard: 9W5K for all POU

Program Block/Library:
MBUS_INIT: 7SH4
MBUS_SLAVE: 7SH4
MBUS1: 7SH4
MBUS_CTRL_P1: DL20
MBUS_MSG_P1: DL20
MBUSM1_P1: DL20
MBUS2: 7SH4
MBUS3: 7SH4
MBUSM2_P1: DL20

Data Block/Wizard: 9W5K for all POU

Booster4
Posts: 4
Joined: Sat Oct 05, 2013 8:55 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Booster4 » Sun Oct 06, 2013 9:34 am

Thanks Linkinx64!!! everything works!
You big good fellow and for certain good person! ! ! (pgood)

CoMod
Site Admin
Posts: 3963
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by CoMod » Sun Oct 06, 2013 12:57 pm

How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Mon Oct 07, 2013 10:33 am

CoMod wrote:How about TIA Step7 V12 Know How Protection ?
Is there a hack you know a tool ???
For Step7 V5.5 I use step7key but for TIA I find nothing.
I haven't tried to find a passwords in TIA portal.
Upload the project to let us see what is possible to do.

Corschun-r
Posts: 7
Joined: Tue Oct 15, 2013 5:52 pm
Location: Тульская область

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Corschun-r » Tue Oct 15, 2013 6:13 pm

Помогите пожалуста
Срочно нужен пароль для проектов S7-200

http://webfile.ru/f67b57b6111642eacfc77e8dbf642a5c


http://webfile.ru/cef9c0ac72ac436895d7feacdd3f50f4

Заранее Спасибо

Linkinx64
Posts: 894
Joined: Sun Apr 11, 2010 3:00 am
Location: Russia

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Linkinx64 » Wed Oct 16, 2013 4:00 am


Lans13
Posts: 2
Joined: Fri Aug 06, 2010 5:13 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Lans13 » Wed Oct 23, 2013 7:20 pm

Помогите пожалуйста подобрать пароль для проекта S7-200:
http://webfile.ru/badc9752098a611e7896dcba053ef5cb

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Thu Oct 24, 2013 1:43 pm

All POU 3132
EEPROM_Direct Library EDIT

Lans13
Posts: 2
Joined: Fri Aug 06, 2010 5:13 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Lans13 » Fri Oct 25, 2013 5:15 am

peterg70, спасибо! (pgood) (tyou)

Ajinkya
Posts: 2
Joined: Mon Oct 28, 2013 7:43 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Ajinkya » Mon Oct 28, 2013 7:58 am

To Linkinx64

Please anybody unprotect password of all POUs.

https://www.dropbox.com/s/mnvhbyiymqc6o ... 8Aug13.mwp
Last edited by Ajinkya on Mon Oct 28, 2013 1:07 pm, edited 1 time in total.

Hightower87
Posts: 2
Joined: Mon Oct 28, 2013 10:01 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Hightower87 » Mon Oct 28, 2013 10:08 am

Hello. Please help me with the password to POU. In advance thank you very much. Sorry for my English. http://webfile.ru/33ecb830265442cde81eb4fbefafe016

wujo3
Posts: 1
Joined: Mon Oct 28, 2013 9:43 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by wujo3 » Mon Oct 28, 2013 1:40 pm

(welc)

Hello I am new.
Would You please to read pass of:

https://rs827p3.rapidshare.com/cgi-bin/ ... C715528B63

https://rs996p3.rapidshare.com/cgi-bin/ ... C715528B63

Some are opened by:7SH4 . Is it standard pass for Siemens block?

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Mon Oct 28, 2013 3:12 pm

Ajinkya wrote:Please anybody unprotect password of all POUs.

https://www.dropbox.com/s/mnvhbyiymqc6o ... 8Aug13.mwp
All POUs %202

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Mon Oct 28, 2013 3:30 pm

Hightower87 wrote:Hello. Please help me with the password to POU. In advance thank you very much. Sorry for my English. http://webfile.ru/33ecb830265442cde81eb4fbefafe016
Program_Block 1234
All other POU passwords are as follows
+L| are the first 3 charactors and the 4th letter is the first letter of the POU
Example
for ABS_Val_0(SBR5) password +L|A
for RasProc(SBR16) password +L|R

Wizard
TD_CTRL_7000 J6R6
TD_ALM_7000 J6R6
DAT0_WRITE G0F9

peterg70
Posts: 121
Joined: Tue Apr 12, 2011 1:44 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by peterg70 » Mon Oct 28, 2013 3:33 pm

wujo3 wrote:Would You please to read pass of:

https://rs827p3.rapidshare.com/cgi-bin/ ... C715528B63

https://rs996p3.rapidshare.com/cgi-bin/ ... C715528B63

Some are opened by:7SH4 . Is it standard pass for Siemens block?
For 2.mwp SCALE_R POU 9754
For 1.mwp POU is either 7SH4 or 9754

Hightower87
Posts: 2
Joined: Mon Oct 28, 2013 10:01 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Hightower87 » Tue Oct 29, 2013 5:04 am

peterg70 Thank You, You helped me very much, password approached.

Ajinkya
Posts: 2
Joined: Mon Oct 28, 2013 7:43 am

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by Ajinkya » Tue Oct 29, 2013 10:52 am

peterg70 wrote:All POUs %202
Thanks (tyou)

ebolak
Posts: 1
Joined: Mon Dec 19, 2011 2:46 pm

Re: [?+]: unPassword Step7/Micro/Win S7-200/S7-300 Project

Post by ebolak » Wed Oct 30, 2013 3:27 pm

Hi all, pls can anybody help me to unpassword protected blocks in following project?

http://www.4shared.com/file/eMbHAUfQ/9056.html

Post Reply