[LINK]: unPassword STEP7/WinCC -projects

Utilites for Simatic Automation
Post Reply
ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

[LINK]: unPassword STEP7/WinCC -projects

Post by ppp » Thu May 31, 2012 12:48 pm

Only for old password - not for Block Privacy
Только для старого метода паролирования - не для Block Privacy
Earlier in STEP7 CPU passwords hidden under asterisks could see easily enough.
After all, the programmers who wrote the STEP7 used a standard method from the Microsoft Visual Studio:
Раньше в STEP7 пароли процессоров под звездочками можно было посмотреть достаточно легко.
Ведь программисты, написавшие STEP7 использовали стандартный прием от Microsoft Visual Studio:
Image
It was enough to remove the asterisk in the property textBox.PasswordChar and password are displayed.
It could have been done a bunch of programs (asterwin, iws from Isqsoft ...)
Достаточно было убрать звездочку в свойстве textBox.PasswordChar и пароль отображался.
Это можно было сделать кучей программ (asterwin, iws от Isqsoft и др.)
Image

However, starting with version 5.5 of this hole covered. Under the stars have no password.
But now you can see passwords in the STEP7 project using pss7
Однако начиная с версии 5.5 эту дыру прикрыли. Под звездочками уже нет никакого пароля.
Однако теперь можно посмотреть пароли в проекте STEP7 с помощью программы pss7
Image
Requirements:
MS Framework 2.0 or higher.
tested on WinXP and Windows7.
virustotal.com check showed that the virus does not.

Using simple. Select the project folder and if it is the processors have the passwords, they will appear in the right part of the program.
Projects supported by any version of STEP7.
Требования:
MS Framework 2.0 и выше.
проверено на WinXP и Windows7.
проверка на virustotal.com показала, что вирусов нет.

Пользоваться просто. Выбираем папку проекта и если в нем процессоры имеют пароли, то они отобразятся в правой части программы.
Поддерживаются проекты созданные в ЛЮБОЙ версии STEP7.

========= Others tools ==================
Unlock password for S7 200 and S7 300 MMC viewtopic.php?t=2005
UnPassword for S7 300 and S7 400 viewtopic.php?f=1&t=17844
Unlock password for S7 300 and S7 400 by dictionary (tested with PC adapters, CP5512, CP5611)
viewtopic.php?t=7029
Unlocking protected C-/VB-functions in WinCC viewtopic.php?f=37&t=4748
Decoder ProSave viewtopic.php?f=37&t=8598
Last edited by ppp on Thu Feb 19, 2015 10:04 am, edited 2 times in total.

sudanee
Posts: 58
Joined: Thu Mar 19, 2009 11:00 am
Location: Sudan

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by sudanee » Mon Jun 11, 2012 11:57 pm

thank you very mush
Its helpful

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Tue Oct 02, 2012 10:50 am

Updata.

Image

add password MicroWin
add password TIA Portal Step7 (CPU S7-300/S7-400)
save passwords in file (button "floppy")

p.s.
TIA Portal как оказалось хранит ВСЕ пароли, которые вы когда либо вводили.
И их легко можно посмотреть.
Last edited by ppp on Tue May 07, 2013 9:45 pm, edited 3 times in total.

CoMod
Site Admin
Posts: 3406
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by CoMod » Thu Oct 04, 2012 7:53 am

https://www.virustotal.com/file/925bd96 ... 349290882/
My Avast blocked to download updated version of pss7.exe too
PPP uses bad Crypt packer for decrease size and for anti reverse analyzing (boom)

Kaspersky find nothing
Russian wrote:PPP использует плохие упаковщики для уменьшения размера файла и чтобы никто не смог разобрать и понять логику его программы
Касперский пока молчит

consol
Posts: 6
Joined: Thu Jun 26, 2008 8:27 am
Location: Europe

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by consol » Fri Nov 02, 2012 9:24 pm

Excellent. Worked perfectly.
Thanks

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Fri Dec 07, 2012 7:48 am

Updata to v1.3

Image

add password WinCC C-script from *.pas

[dead]
see v1.6
Last edited by ppp on Tue Dec 11, 2012 12:13 pm, edited 2 times in total.

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Tue Dec 11, 2012 11:41 am

Updata to v1.4

Image

add password WinCC VB-script
fix bugs

[dead]
see v1.6
Last edited by ppp on Tue May 07, 2013 8:43 pm, edited 1 time in total.

pupylator
Posts: 1
Joined: Thu May 19, 2011 6:37 pm

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by pupylator » Sat Jan 19, 2013 10:17 am

Hello ppp,
do you have solution for s7-1200? On all others workes fine but on 1200 not at all...
THX

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Tue May 07, 2013 9:17 pm

Updata to v1.5

Image

add password LOGO!
fix bugs
[dead]

see v1.6
Last edited by ppp on Tue Apr 08, 2014 5:12 am, edited 2 times in total.

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Thu Oct 24, 2013 2:16 pm

New version 1.5.1
Fix bugs.

[dead]
see v1.6
Last edited by ppp on Tue Apr 08, 2014 5:11 am, edited 1 time in total.

spiadimonis
Posts: 1
Joined: Wed Aug 29, 2012 12:21 pm

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by spiadimonis » Thu Jan 02, 2014 10:43 pm

Hello PPP,

GREAT JOB!!

Are you looking some solution for s7-1200?

THX


YeuPLC
Posts: 4
Joined: Fri Jul 29, 2011 10:28 am

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by YeuPLC » Mon Jan 13, 2014 6:29 am

Thank you verry much! Tool is good! (clap) (tyou)

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by ppp » Mon Jun 30, 2014 12:17 pm

New version 1.6
Image
+ fix bugs
+ add panel Pro-face
Last edited by ppp on Thu Feb 19, 2015 10:03 am, edited 1 time in total.

iegova
Posts: 1
Joined: Wed Jul 30, 2014 12:26 pm

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by iegova » Wed Jul 30, 2014 12:31 pm

Не планируется ли для серии s7-1200 подобное сделать? мне бы сейчас очень помогло

xflash
Posts: 112
Joined: Sat May 21, 2011 3:28 am

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by xflash » Wed Dec 03, 2014 1:21 pm

Thanks again for the update.

Now we are waiting for the 7.3 unPassword

thanks again

expert2010
Posts: 10
Joined: Wed Sep 15, 2010 8:34 am

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by expert2010 » Tue Dec 09, 2014 12:57 pm

Waiting for S7 - 1200 CPUs

oleksandr_ua
Posts: 90
Joined: Thu Jan 01, 2015 9:02 am

Re: [LINK]: unPassword CPU under star in STEP7-projects

Post by oleksandr_ua » Wed Jan 07, 2015 8:39 pm

WinCCnoprotect [dead]
viewtopic.php?f=37&t=4748
Как программой Passwords Simatic определяются пароли на скрипты WinCC?

Есть проект WinCC, интегрированный в Step7, указываю путь к проекту Step7, пароли на скрипты WinCC не появляются в окне Passwords Simatic?
Что делаю не так?


P.S. Хотел скачать еще WinCCnoprotect.exe, но все ссылки не рабочие....

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by ppp » Wed Feb 18, 2015 12:40 pm

New version 1.7

Image

>= MS Framework 4.0 (For Windows 7,8,10)
add pass project PLC Delta
add pass project Elau EPAS-4
fix bugs

http://www37.zippyshare.com/v/v3s8LhyS/file.html
http://rghost.ru/6pRFByyML
https://1fichier.com/?f2cvw9nse5
http://ge.tt/6J6nKlA2/v/0?c

new upload
no detect "virus"
Image
Last edited by ppp on Thu Feb 19, 2015 9:53 am, edited 2 times in total.

oleksandr_ua
Posts: 90
Joined: Thu Jan 01, 2015 9:02 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by oleksandr_ua » Wed Feb 18, 2015 7:58 pm

does not start
windows 8...
Image

windows xp sp3
does not start and does not write

CoMod
Site Admin
Posts: 3406
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by CoMod » Wed Feb 18, 2015 8:13 pm

use VirtualBox - no problem
Image
Image

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by ppp » Thu Feb 19, 2015 9:19 am

new upload
no detect "virus"
Image

CoMod
Site Admin
Posts: 3406
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by CoMod » Thu Feb 19, 2015 5:38 pm

ppp wrote:new upload
no detect "virus"
Image
1/57 :)
Qihoo-360 HEUR/QVM03.0.Malware.Gen 20150219

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by ppp » Fri Apr 17, 2015 9:00 am

Last edited by ppp on Fri May 22, 2015 1:07 pm, edited 1 time in total.

akus0n
Posts: 1
Joined: Wed Apr 10, 2013 9:46 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by akus0n » Tue Apr 21, 2015 7:10 am

Is it also possible to see Password for safety program (S7 F-Systems, based on CFC - not Distributed Safety)???

kaffeemuehle
Posts: 20
Joined: Mon Nov 06, 2006 8:49 pm
Location: Europe

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by kaffeemuehle » Thu Apr 30, 2015 6:01 pm

Is there what to follow with Elau EPAS-4 projects? :?:

No password is indicated(signalised).

A vintage and a writing password presumably exists here.

Kopyloff
Posts: 2
Joined: Fri Sep 02, 2011 9:25 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by Kopyloff » Tue May 05, 2015 6:29 pm

Thank you very much! v1.7 is working very well, but on v1.8 - virus 11 / 56:
https://www.virustotal.com/ru/file/d7e9 ... /analysis/

s_victor_s
Posts: 3
Joined: Wed Jun 20, 2012 7:23 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by s_victor_s » Fri May 08, 2015 8:41 am

TIA Portal V13 SP1 not work :(

miden
Posts: 6
Joined: Fri Mar 25, 2011 6:10 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by miden » Mon Jul 06, 2015 7:06 am

Thank you very much! 1.8A working very well. CPU & safety hacked.
Can you add passwords for AS-i monitor 3?

art12345art
Posts: 2
Joined: Sun Oct 20, 2013 9:18 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by art12345art » Sat Aug 22, 2015 11:32 pm

:o level of the programer GOD

ppp
Posts: 241
Joined: Thu Feb 09, 2006 6:52 am
Location: Russia

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by ppp » Tue Sep 22, 2015 8:45 am

updata to v1.82
fix bugs

http://www42.zippyshare.com/v/jzMYnxZP/file.html
http://rghost.ru/8t5LhY27Q
https://1fichier.com/?2919yzluvn
http://ge.tt/3WkmdKO2/v/0
http://multiupload.biz/czhe2vb6i5ea/pss ... z.exe.html

ADMIN add :oops:
=========== if you're afraid of threats - Use in Virtual Machine ==================
=========== если боитесь угрозы - используйте на Виртуальной Машине ==================
https://www.virustotal.com/ru/file/7006 ... 442933620/
2015-09-22 14:53:40 UTC 4/56 (DrWeb Trojan.DownLoader11.18272 )
2015-12-21 17:58:28 UTC 2/55 (DrWeb Trojan.DownLoader11.18272 )

xflash
Posts: 112
Joined: Sat May 21, 2011 3:28 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by xflash » Tue Oct 27, 2015 7:20 am

Great thanks.

1.82 works like a charm.

Will ppp try to reveal the wincc 7.2/7.3SE picture password? It is needed in future.

zbr82
Posts: 1
Joined: Thu Feb 11, 2016 8:26 pm

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by zbr82 » Thu Feb 18, 2016 11:35 am

РРР, you are planning to implement the removal of the password to the F- Program?

hardprogger
Posts: 8
Joined: Thu Dec 01, 2011 4:18 pm

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by hardprogger » Mon Mar 07, 2016 3:26 pm

Does anybody know how to remove or get password (know how protection) from Sinamics Starter scripts?

robertetc
Posts: 1
Joined: Sat May 28, 2016 8:37 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by robertetc » Wed Jun 01, 2016 5:46 am

hello, has anybody tried to access a full password protected (for writing and also for reading) mmc card? i do not have access to the project folder situated only on the mmc in order for the pss7 1.82 to read the password that is setup on the project itself.
i tried with a card reader inside a siemens computer and it didn't work, it wouldn't let me acces the mmc, evens if i saw the structure of the project itself.
a friend of mine suggested to buy an usb prommer; the prommer connected to a pc offers the possibility for the pss7 to conect to the device and read the password.
can anybody help me with this?
kind regards,

gkaim
Posts: 1
Joined: Thu Jan 23, 2014 10:59 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by gkaim » Mon Jun 06, 2016 10:37 am

PPP and guys please,

I downloaded WinccNoProtect.exe and use it in Windows XP Pro to remove the passwords from C-scripts but is not working.
I have closed all the projects. How this patch should be used ?
Thank you.

HLAM
Posts: 3
Joined: Mon May 16, 2016 10:55 pm

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by HLAM » Wed Jun 22, 2016 1:17 am

Hi everyone,

Can this software discover the CPU password?
I have a Siemens 222 CN and I cant upload the project.

Thanks a lot.


CoMod
Site Admin
Posts: 3406
Joined: Thu Feb 16, 2006 3:25 pm
Location: Russia
Contact:

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by CoMod » Wed Jul 06, 2016 11:09 am

https://virustotal.com/ru/file/62767ffb ... 467803280/
(h) 3/52 DrWeb, McAfee-GW-Edition, Qihoo-360

xflash
Posts: 112
Joined: Sat May 21, 2011 3:28 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by xflash » Thu Jul 07, 2016 3:23 am

ppp wrote:updata to v1.83
Great thanks!
It just works like magic.
Please consider unPassword wincc picture password. It is new for wincc 7.2/7.3/7.3SE/7.4
Good luck.

duongvuquy
Posts: 57
Joined: Wed Jan 13, 2010 3:27 pm

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by duongvuquy » Tue Jul 26, 2016 5:54 pm

http://www.mediafire.com/download/157c0 ... 1510cm.zip
I have a project as above link, But I can't find password of safety FC.
Please help me to find it.
Thanks and best regards,

markento
Posts: 17
Joined: Thu Jan 16, 2014 3:26 pm

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by markento » Fri Dec 02, 2016 10:03 am

Are there Soft for unPassword TIA Portal 13; 14 (s7-1200; S7-1500) and S7-Distributed Safety?
https://www.slideshare.net/AlexanderTim ... lideshow=1

mikelyu
Posts: 3
Joined: Sun Jan 07, 2018 12:51 am

Re: [LINK]: unPassword STEP7/WinCC -projects

Post by mikelyu » Tue Jan 09, 2018 2:43 am

(tyou) (gpost)
If PPP could add TIA-12/1500 CPU, it will be much more great!!

Also as mentioned by others, WINCC-V7.3 picture password is needed in future.

PPP up!

Post Reply