PLCforum.uz.ua

Hye All,

Did any body have Flow calc32 software with serial key or crack ?


Regards

AJC

Link_is_Dead :(/Flowcalc.exe.html
Please replace crack in folder ce.

in Russian wrote:Есть русская программа Расходометр_СТ. Может кому надо.

Good Luck!

Thank you very much vlad for this post.
zenchek

Lot of thanks for this very very usefull help. The crack is fully working with v4.05 ( latest version till date ).
Thanks again. I have many usefull software if you require.

you have other software
please give list ?

regards

gremlin

Hi,
If you have Festo Fluid Sim Please upload to rapidshare.

Thanks in advance,
Happy New year 2008.

Link_is_Dead :(/Festo3.6.rar
http://www.fluidsim.de/fluidsim/indexud3_e.htm
Good luck!

For activation in Flowcalc compensation please
open Flowcalc.exe in hex editor (winhex),
get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00
Good luck!

Hi vlad
Thank you very much, all work.
zenchek

Big thank you to vlad2006gr
thanks
gremlin

link dead.
i used hex editor and cant find the hex numbers for the latest version of flowcalc32.
anybody has crack for the flowcalc32 v5.30?

or flowcalc v4.05 installaion software so that i can use hex editor and i can get offset 15FDC0 and replace:
old- 007562A11CB557008B008B10FF92EC00
new- 007462A11CB557008B008B10FF92EC00

thank you for all who will contribute in...

I need Key for Flowcalc32 Version 5.33 key needed. please hlep us in this regards

Or some one please share the Licensed version 5.30 which Key is given Above.

Regards
Rafi

Hex Modification is not working please help


Thanks In advance