[?]: About modicon micro PLC "110cpu612 03"

capsute · Post by **capsute** » Thu Sep 27, 2007 12:21 am

We have a very old modicon micro PLC dubed "110cpu612 03",
We lost it's running program by taking out the battery inadvertently.
rewriting the program is a only thing that we can do,
so we need the programe software for this kind of PLC and the detailed instruction or manual for the sofeware and the PLC itself,
we know that there are many very experienced pros in this forum,
so we wish someone can share their repository with us.thanks in advance!

most · Post by **most** » Thu Sep 27, 2007 7:50 am

for modicon 612

programs
Proworx 32 or ntx - very hard to find

workshop for modicon - http://plc.net.ru/viewtopic.php?t=5912& ... t=workshop

modsoft 2.6 - work in SO dos
http://bbs.e10000.cn/a/a.asp?B=16&ID=10 ... 1&r=148761

in this programs you have help for manual software

regards
most

Jonny_M · Post by **Jonny_M** » Thu Sep 27, 2007 7:53 am

Code: Select all

Utility           OverView I/OMap   Ports    Segmnts  Loadable Cfg Ext  Quit
F1───────F2───────F3───────F4───────F5───────F6───────F7─Lev 8─F8─OFF───F9─────┐
│                        CONFIGURATION OVERVIEW                                │
│                                  │  Size of Full Logic Area  02113           │
│     PLC  :                       │  No. of I/O Map Words     00161           │
│     PLC Type              MICRO-S├──────────────────────────────────         │
│     Model                 612/03 │  I/O  :                                   │
│     System Memory           3.1K │  Number of Segments       2               │
│     Micro Child ID          None │  Number of Children       0               │
│                                  │  I/O Locations            19              │
│                                  ├──────────────────────────────────         │
│    ──────────────────────────────┤  Specials  :                              │
│      Ranges   :                  │  Battery Coil             00081           │
│      0xxxx    00001  - 01536     │  Timer Register           40011           │
│      1xxxx    10001  - 10512     │  Time of Day Clock        40012  - 40019  │
│      3xxxx    30001  - 30048     │  Cfg. Extension Used/Size     0/    0     │
│      4xxxx    40001  - 41872     ├───────────────────────────────────        │
│      4xxxx <-> SFC      None     │                                           │
│                                  │                                           │
│     Dupl. Coils Start: 0-----    │                                           │
│     ─────────────────────────────┤                                           │
│      0xxxx <-> SFC      None     │                                           │
│                                  │                                           │
│                                                                              │
└Utility provides Key Help, Status, RDE, Symbol Table, and access to DOS.      ┘

I have MODSOFT, and i can add "PLC Type - MICRO-S, Model 612/03" in configuration. How can i send it to You?

ps

Sorry for my English

capsute · Post by **capsute** » Fri Sep 28, 2007 12:45 am

nice to have so many warmhearted guy to help me,I truely eager to know where you guy come from?what are you doing?even what you guy look like?I open my email capsute@163.com,pls send your information or help to there.thanks again.

Garog · Post by **Garog** » Wed Oct 03, 2007 5:16 pm

nice to see so many people that know this old plc...

i miss modicon plc and the new unity programms here in this forum

we have the software for the plc.. but only for BeOS

buuut you can install it all in an virtual machine on you pc. i use it under XP in VM Ware and it is working very good. i look to upload the software for you

you come from china... hmm.. *think of something* is the machine a slitterline ??

capsute · Post by **capsute** » Sat Oct 06, 2007 7:28 am

It will be nice to have you help me,but I am afraid you will be disappointed after I have to tell you that we are not in that industry area.but anyway anyhelp will be appreciated. I still need the manual for the hardware of this kind of PLC.thank you!