DEAD ERROR No. 305

другие контроллеры
Post Reply
ernandef
Posts: 3
Joined: Fri Feb 19, 2016 12:56 am

DEAD ERROR No. 305

Post by ernandef » Wed Aug 10, 2016 11:49 pm

Hello!
After power on my plc (Schneider Quantum - 140 CPU 65150) i get this info on lcd screen.
DEAD ERROR No.305
Does any one know the meaning of this error code?

Thanks!

SE_support
Posts: 101
Joined: Thu Aug 29, 2013 4:11 pm

Re: DEAD ERROR No. 305

Post by SE_support » Mon Aug 15, 2016 8:41 am

Hello ernandef,

in most cases you need to check/replace your power supply (140CPSxxxxx).

ernandef
Posts: 3
Joined: Fri Feb 19, 2016 12:56 am

Re: DEAD ERROR No. 305

Post by ernandef » Tue Aug 16, 2016 7:46 pm

Hello SE_support !

I solved this issue on other way. I opened my cpu and cleaned all connections inside. After that, the problem was solved.

Thank you!!

SE_support
Posts: 101
Joined: Thu Aug 29, 2013 4:11 pm

Re: DEAD ERROR No. 305

Post by SE_support » Wed Aug 17, 2016 6:58 am

ernandef wrote:Hello SE_support !

I solved this issue on other way. I opened my cpu and cleaned all connections inside. After that, the problem was solved.

Thank you!!
really strange solution :) May be you had luck. Thanks for feedback!

Post Reply