Modicon TSX Micro Nano

другие контроллеры
Post Reply
frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Modicon TSX Micro Nano

Post by frederico_jpm » Wed Sep 18, 2013 7:29 pm

Hi!

I need to make some changes in Modicon TSX Micro Nano but I don't have program cable and software too.

There are someone who know the software that I should have and the cable that I should buy?

P.S. I already have the program code of the PLC that I will work with.

Thanks for all your attention and sorry my bad English!

Schtiel
Site Admin
Posts: 1121
Joined: Wed Sep 06, 2006 12:03 pm
Location: CIS

Re: Modicon TSX Micro Nano

Post by Schtiel » Thu Sep 19, 2013 7:56 am

I think you should use PL7 software

kriztof
Posts: 96
Joined: Fri Nov 16, 2007 3:18 pm
Location: Europe

Re: Modicon TSX Micro Nano

Post by kriztof » Thu Sep 19, 2013 9:05 am

Original cable is TSX PCX 1031, you can also do it yourself. To build cable you need Male 8 pin mini DIN connector and RS485 converter - check pin-out in documentation. I recommend to use PL 707 Win
PL707 Win

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Fri Sep 20, 2013 3:11 pm

First Thanks for the answers.

To avoid the risk my boss decided to buy the cable, the PLC are in client's Factory (so we cannot travel 500km taking the risk of the cable fail), we ask it to a supplier and tey recommend TELTSXCUSB485 and TELTSXCRJMD25. I will get them this afternoon.

About the software PL707 only open *.PL7 files and the program code that client send to me is *.TSX.

Do you know how can I open it?

kriztof
Posts: 96
Joined: Fri Nov 16, 2007 3:18 pm
Location: Europe

Re: Modicon TSX Micro Nano

Post by kriztof » Fri Sep 20, 2013 4:46 pm

we ask it to a supplier and tey recommend TELTSXCUSB485 and TELTSXCRJMD25
It should works without problem.
About the software PL707 only open *.PL7 files and the program code that client send to me is *.TSX.
I worked a few times with TSX Nano (TSX 07) and PL707 Win software but always with my own code. I would change file extension and check if it is possible to open in PL707 Win.

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Fri Sep 20, 2013 5:15 pm

https://db.tt/vY2yW53o

On this link you can download the program.

Thanks for attention.

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Modicon TSX Micro Nano

Post by mohdabshr » Fri Sep 20, 2013 5:57 pm

Hi
Schtiel is right you must use PL7pro v4.5 and it is already in the forum and I download your program TSX MICRO LINEA 3 and open it with PL7pro v4.5.

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Fri Sep 20, 2013 6:06 pm

Thanks for the confirmation.

I'm trying to download it but all link are down.

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Modicon TSX Micro Nano

Post by mohdabshr » Fri Sep 20, 2013 6:14 pm

I checked this link is ok.
http://www.filecrop.com/PL7-Pro-v4.5.html

try it.

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Fri Sep 20, 2013 11:56 pm

Great!!! It's working =D

As you said PL7 PRO V4.5....

I'm running it on Windows 7 32bit with compatibility XP SP3.

the only problem is the license but I just will use this software 1 or 2 days.

About the cables I do not receive them yet, but when a get them and try I will say something....

Thanks Very Much.

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Tue Sep 24, 2013 8:33 am

So, where I'm trying to fight with an TSX3710DC PLC.

I'm using the cables TSXCUSB485 + TSXCRJMD25 and PL07 v4.5Pro.

I installed a lot of drivers to recognize the cable on windows XP (TSXCUSB485_Driver, MODBUS Serial) as I saw in some manuals, but I still not communicating with PLC, I think that is missing some points to do but I don't know what.

Can someone give some help? Like communication parameters, address that I should try to use, drivers that can be missing, anything that can help please.

Thanks Again.

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Modicon TSX Micro Nano

Post by mohdabshr » Tue Sep 24, 2013 10:38 am

in your plc program I see the configuration for Chanel 0 is unitelway link so you must configure your unitelway driver not modbus to communicate to plc ,search for unitelway driver v1.7 IE18 in your driver manager.
good luck.

frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Wed Sep 25, 2013 9:43 am

Yes, you are right, but what was missing is explained on link below

http://www.infoplc.net/foro/showthread. ... -tsx-micro

After done all of this everything was working perfectly.

So this job with TSX Micro 27 are done.

Next step is TSX Micro 17 waiting for me :( .... They wanna kill my brain ^^

Do you recommend any software for this version?

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Modicon TSX Micro Nano

Post by mohdabshr » Thu Sep 26, 2013 5:41 pm


frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Thu Sep 26, 2013 7:28 pm

I cannot download it, always failing. :(


frederico_jpm
Posts: 10
Joined: Wed Sep 18, 2013 7:19 pm

Re: Modicon TSX Micro Nano

Post by frederico_jpm » Thu Sep 26, 2013 10:00 pm

This is manual not the software :(

mohdabshr
Posts: 180
Joined: Sat Jul 23, 2011 2:02 pm

Re: Modicon TSX Micro Nano

Post by mohdabshr » Fri Sep 27, 2013 7:31 am

Hi
in the first link read it complete you will find attachment for the software pl7-2.

wahyu aji
Posts: 11
Joined: Tue Apr 26, 2011 5:34 am
Location: Indonesia

Re: Modicon TSX Micro Nano

Post by wahyu aji » Tue May 17, 2016 5:52 am

i cannot download the link (dlink) , always failed please relink again, thank U

Post Reply