[?]: ABB Process Portal 2.1.2 Restore Problem

[kankanaka]

Hi,
We have ABB Process Portal 2.1.2 We taken backup from Configuration Wizard 20 days ago.We have a backup without any errors and warnings.
Firstly I deleted system from Configuration Wizard, Now trying to restore ,there is an error message at like below;

Code: Select all

-Loading c:\13102011\Object Type Structure1.afw ...
-Loading c:\13102011\Object Type Structure0.afw ...
-Loading c:\13102011\System Structure0.afw ...
-Failed to restore file c:\13102011\System Structure0.afw. The importer returned hr = 0x8000ffff
-Loading c:\13102011\Service Structure0.afw ...
-Loading c:\13102011\Product Type Structure0.afw ...
-Loading c:\13102011\Node Administration Structure0.afw ...
-Loading c:\13102011\Product Structure0.afw ...

Anybody have an I idea about solution ...

Regards.

[Linkinx64]

Hi, kankanaka

Too few information to make any conclusion.

1. Did you reinstall PPA and/or operating system before restore?
2. Which system extensions were loaded in system that is existed 20 days ago?
3. What is written in log file?
4. Are the other parts of aspect directory were restored or restore fully failed after 8 errors and system doesn't work?

[kankanaka]

Hi Linkinx64,
Nothing was changed last 20 days. We have a backup 13 October 2011 dated. PPA is same, operating system also same, nothing installed or deleted.
Projects files saving C:\OperateITData\ directory. When I want to Restore , system not allow to restore project to that directories, I have to rename directory path for restore for examle C:\OperateITData1\.
After than start the restore process and coming an small error window while loading SystemStructure0.afw.

Sytem has one server and one client nodes. Other errors and end of restore file below;


Thu Oct 27 16:43:13 2011 [Error] : Error. Graphic Aspect = secStationM:secStationTrimCurve
The following 3'rd party ActiveXs are missing:
AC800MSubeleB5DD8E56585945.UL_TrimCurve

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:45:44 2011 [Error] : Graphic Aspect = UT Operator Workplace:Application Bar Fixed Display
Referenced graphic aspects are not found
Graphic Aspect = A16:Area Display Link
Graphic Aspect = A1:Area Display Link
Graphic Aspect = A2:Area Display Link
Graphic Aspect = A3:Area Display Link
Graphic Aspect = A4:Area Display Link
Graphic Aspect = A5:Area Display Link
Graphic Aspect = A6:Area Display Link
Graphic Aspect = A7:Area Display Link
Graphic Aspect = A8:Area Display Link
Graphic Aspect = A9:Area Display Link
Graphic Aspect = A10:Area Display Link
Graphic Aspect = A11:Area Display Link
Graphic Aspect = A12:Area Display Link
Graphic Aspect = A13:Area Display Link
Graphic Aspect = A14:Area Display Link
Graphic Aspect = A15:Area Display Link
These missing aspects will show up as PictureBoxes.
Please verify that all aspects above are imported.
Thu Oct 27 16:47:48 2011 [Error] : Internal Error. Corrupt dependency list in graphic aspect. Graphic Aspect = secStationM:secStationExtendedControl
Aspects found in aspect directory and dependencies corrected:
Graphic Aspect = AC800M Subelements :UL_IBar (progid = AC800MSubele2AC0C9390ED6453.ULIBar)

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:48:37 2011 [Error] : Internal Error. Corrupt dependency list in graphic aspect. Graphic Aspect = secStationM:secStationControl
Aspects found in aspect directory and dependencies corrected:
Graphic Aspect = AC800M Subelements :UL_IBar (progid = AC800MSubele2AC0C9390ED6453.ULIBar)

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:48:38 2011 [Error] : Error. Graphic Aspect = secStationM:secStationTrimCurve
The following 3'rd party ActiveXs are missing:
AC800MSubeleB5DD8E56585945.UL_TrimCurve

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:48:38 2011 [Error] : Error. Graphic Aspect = secStationM:secStationTrimCurve
The following 3'rd party ActiveXs are missing:
AC800MSubeleB5DD8E56585945.UL_TrimCurve

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:49:06 2011 [Error] : Internal Error. Corrupt dependency list in graphic aspect. Graphic Aspect = UT Operator Workplace:Application Bar Fixed Display
Recovery not succeeded because the object was not found. ProgIds for missing aspects:
A10FDFB19872BBC484CAFF15D3.AreaDisplayL
A11A2E07F2042224AC7A1E7E98.AreaDisplayL
A1218C0964382D84259A9A0A78.AreaDisplayL
A136390B75745A04002B5B0485.AreaDisplayL
A1409A80519DFD74DE8A598F82.AreaDisplayL
A154F076B789CF444FBAC873A9.AreaDisplayL
A16BF1B2110CA3847768111772.AreaDisplayL
A1AF1DE5C9573041E98AD8B3A1.AreaDisplayL
A28746E18394804800977F302A.AreaDisplayL
A3745E21B983BD429FB41E279F.AreaDisplayL
A42603C994184D4AF0969A9A5B.AreaDisplayL
A5B81E7D7150D1446F8961C828.AreaDisplayL
A621B8E4FD237D4C52860A89D2.AreaDisplayL
A7A9A6F4CF7E044D5FA2A06149.AreaDisplayL
A8A646EAB4728945539F837308.AreaDisplayL
A9D2795B27D2304DEDBB1E6E6F.AreaDisplayL

Open the graphic aspect in the Graphics Builder and correct the problem.Thu Oct 27 16:50:29 2011 Changing Aspect Directory mode to normal ...
Thu Oct 27 16:50:30 2011 Registry key
Software\ABB\Sigma\Systems\{6E6E9C6B-A057-46FA-86A6-648D50AA5F43}.{206C70AE-2D8F-4209-BC25-755E1198D56F}
deleted
Thu Oct 27 16:50:30 2011 Restore completed

Thanks, Regards.

[Linkinx64]

I had similar errors when upgraded project from VB (PPA 2.1) to PG2 (SV5.1).
The problem was in broken reference (third-party activeX component) and message very similar.

The following 3'rd party ActiveXs are missing:
AC800MSubeleB5DD8E56585945.UL_TrimCurve

You have to define which component been used in AC800MSubeleB5DD8E56585945.UL_TrimCurve aspect.
Find respected .dll or .ocx file with this component and re-register it in the system (with regsvr32.exe).
Then try restore again.

regards, Linkinx64

[st_e_fan]

May i suggest doing the following:
1. Download the application(s) to PLC in order to re-create CDO and CDA files.(don't forget to check 'mirror to aspect' from the CBM)
2. Open each GD and deploy it. If there is the error, the compiler should ask for auto resolve the references and you select this option.
3. Check the log configuration (if you collect historical data maybe the old logs will be missing or overwritten).
4. Add workstation to the system.
5. Check the service structure in your ABB system.
6. If necessary reinstall the VB6 or select the missing libs from the VB editor related to PPA2.1.2
7. Last but not least - check the OPC server is connected to the AS/CS Computer and you have both for the data access and alarm and event this icon
8. Next time when your system is resurrected, be sure you create Acronis copy of the Server and workstation and do this on regular basis (e.g. on every 24h)

Hope this helps

[kankanaka]

Hi,

Thanks for helps. But I decide not to do about restore. We have a ghost image of computer's hard disc. We turned back and redesign pages, unfortunately.

BR

[st_e_fan]

Another smart thing you could do is to take a look at the last version of the PPA 5.1 and try to migrate your system to this version on virtual environment (to practice i mean and redraw all displays and GElements, etc) Then when the time come for the REAL upgrade you will be ready and be able to make it just for one day
Best regards!